| ||Format||Pages||Price|| |
|4||$42.00||  ADD TO CART|
|Hardcopy (shipping and handling)||4||$42.00||  ADD TO CART|
Significance and Use
This test method provides a means of evaluating and comparing development of corrosion at scribe on painted/coated flat test panels after exposure to corrosive environments.
1.1 This test method covers the measurement of rust creepage area from a scribe line on painted/coated flat test panels after exposure to corrosive environments. This test method has the advantage of simplicity and ease of use. Expensive equipment is not required, and the results are more accurate than visual evaluation but not as precise as advanced digital imaging.
1.2 This test method uses visual imaging software to determine the area damaged by rust creepage from the scribe.
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
B117 Practice for Operating Salt Spray (Fog) Apparatus
D1014 Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates
D1654 Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
D4585 Practice for Testing Water Resistance of Coatings Using Controlled Condensation
D4587 Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
D5894 Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
D6695 Practice for Xenon-Arc Exposures of Paint and Related Coatings
G85 Practice for Modified Salt Spray (Fog) Testing
ICS Number Code 77.060 (Corrosion of metals)
UNSPSC Code 47101506(Corrosion control equipment)
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM D7087-05a(2010), Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments, ASTM International, West Conshohocken, PA, 2010, www.astm.orgBack to Top