Standard Active Last Updated: Jun 28, 2023 Track Document
ASTM D6192/D6192M-19(2023)

Standard Tables of Body Measurements for Girls, Sizes 2 to 20 (Reg & Slim) and Girls Plus

Standard Tables of Body Measurements for Girls, Sizes 2 to 20 (Reg & Slim) and Girls Plus D6192_D6192M-19R23 ASTM|D6192_D6192M-19R23|en-US Standard Tables of Body Measurements for Girls, Sizes 2 to 20 (Reg & Slim) and Girls Plus Standard new BOS Vol. 07.02 Committee D13
$ 69.00 In stock
ASTM International

Significance and Use

4.1 The use of the body measurement information in Tables 1-6 will assist manufacturers in developing patterns and garments that are consistent with the current anthropometric characteristics of the population of interest. This practice should, in turn, reduce or minimize consumer confusion and dissatisfaction related to apparel sizing. (Also refer to ISO 3635 Size Designation Procedures.)

4.2 Three-dimensional avatars depicting each of the children’s sizes were created by Alvanon, Inc. and included in this standard to assist manufacturers in visualizing the posture, shape, and proportions generated by the measurement charts in the accompanying Tables. (See Figs. 1-15.)

FIG. 1 Form Front View 2-6X Girls

Form Front View 2-6X GirlsForm Front View 2-6X Girls

FIG. 2 Form Side View 2-6X Girls

Form Side View 2-6X GirlsForm Side View 2-6X Girls

FIG. 3 Form Back View 2-6X Girls

Form Back View 2-6X GirlsForm Back View 2-6X Girls

FIG. 4 Form Front View 7-20 Girls

Form Front View 7-20 GirlsForm Front View 7-20 Girls

FIG. 5 Form Side View 7-20 Girls

Form Side View 7-20 GirlsForm Side View 7-20 Girls

FIG. 6 Form Back View 7-20 Girls

Form Back View 7-20 GirlsForm Back View 7-20 Girls

FIG. 7 Form Front View 7-20 Girls Slim

Form Front View 7-20 Girls SlimForm Front View 7-20 Girls Slim

FIG. 8 Form Side View 7-20 Girls Slim

Form Side View 7-20 Girls SlimForm Side View 7-20 Girls Slim

FIG. 9 Form Back View 7-20 Girls Slim

Form Back View 7-20 Girls SlimForm Back View 7-20 Girls Slim

FIG. 10 Form Front View 4-6X Girls Plus

Form Front View 4-6X Girls PlusForm Front View 4-6X Girls Plus

FIG. 11 Form Side View 4-6X Girls Plus

Form Side View 4-6X Girls PlusForm Side View 4-6X Girls Plus

FIG. 12 Form Back View 4-6X Girls Plus

Form Back View 4-6X Girls PlusForm Back View 4-6X Girls Plus

FIG. 13 Form Side View 7-20 Girls Plus

Form Side View 7-20 Girls PlusForm Side View 7-20 Girls Plus

FIG. 14 Form Front View 7-20 Girls Plus

Form Front View 7-20 Girls PlusForm Front View 7-20 Girls Plus

FIG. 15 Form Back View 7-20 Girls Plus

Form Back View 7-20 Girls PlusForm Back View 7-20 Girls Plus

Scope

1.1 These tables list body measurements of girl’s sizes. Although these are body measurements, they can be used as a baseline in designing apparel for girls in this size range when considering such factors as fabric type, ease for body movement, styling, and fit.

1.2 The maximum age for the Girl’s chart is 121/2 years old to the size 20.

1.3 The size table includes the range of toddler sizes, (2,3,4) BG=Boy, Girl. These values are for both girl’s & boy’s and will be included in the boy’s standard as well. Kids (5,6) BG=Boy, Girl.

1.4 These tables list body measurements for the complete range of Girls sizing, Regular, Slim, Plus. Slim subjects are of same stature (height), with a slimmer body, and lower body weight than regular subjects as illustrated by the measurement charts. Plus subjects are the same stature (height), with fuller body, and higher body weight than regular subjects as illustrated by measurement charts in Tables D6458/D6458M.

1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 07.02
Developed by Subcommittee: D13.55
Pages: 14
DOI: 10.1520/D6192_D6192M-19R23
ICS Code: 61.020