If you are an ASTM Compass Subscriber and this document is part of your subscription, you can access it for free at ASTM Compass
    ASTM D5274 - 00(2019)

    Standard Guide for Analysis of 1,3–Butadiene Product

    Active Standard ASTM D5274 | Developed by Subcommittee: D02.D0.04

    Book of Standards Volume: 05.02

      Format Pages Price  
    PDF 3 $48.00   ADD TO CART
    Hardcopy (shipping and handling) 3 $48.00   ADD TO CART

    Significance and Use

    4.1 This guide is intended to provide information on the possible composition of 1,3-butadiene products and possible ways to test them. Since there are currently not enough ASTM standards for determining all components of interest, this guide provides information on other potentially available test methods.

    4.2 Although this guide is not to be used for specifications, it can provide a starting point for parties to develop mutually agreed-upon specifications that meet their respective requirements. It can also be used as a starting point in finding suitable test methods for 1,3-butadiene components.

    1. Scope

    1.1 This guide covers the analysis of 1,3–butadiene products produced in North America. It includes possible components and test methods, both ASTM and other, either actually used or believed to be in use, to test for these components. This guide is not intended to be used or construed as a set of specifications for butadiene products.

    1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.

    1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

    1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    D1025 Test Method for Nonvolatile Residue of Polymerization-Grade Butadiene

    D1157 Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons

    D1550 Standard ASTM Butadiene Measurement Tables

    D2384 Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures

    D2426 Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography

    D2593 Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography

    D3246 Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry

    D3700 Practice for Obtaining LPG Samples Using a Floating Piston Cylinder

    D4178 Practice for Calibrating Moisture Analyzers

    D4423 Test Method for Determination of Carbonyls in C4 Hydrocarbons

    D4468 Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry

    D4629 Test Method for Trace Nitrogen in Liquid Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection

    D4864 Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography

    D5799 Test Method for Determination of Peroxides in Butadiene

    ICS Code

    ICS Number Code 71.080.10 (Aliphatic hydrocarbons)

    UNSPSC Code

    UNSPSC Code

    Referencing This Standard
    Link Here
    Link to Active (This link will always route to the current Active version of the standard.)

    DOI: 10.1520/D5274-00R19

    Citation Format

    ASTM D5274-00(2019), Standard Guide for Analysis of 1,3–Butadiene Product, ASTM International, West Conshohocken, PA, 2019, www.astm.org

    Back to Top