| ||Format||Pages||Price|| |
|12||$60.00||  ADD TO CART|
|Hardcopy (shipping and handling)||12||$60.00||  ADD TO CART|
|Standard + Redline PDF Bundle||24||$72.00||  ADD TO CART|
This specification covers extended life type, nonplowable, retroreflective raised pavement markers for nighttime lane marking and delineation. Pavement markers shall undergo tests to examine their conformance with specified construction, performance (retroreflectivity), and physical property (flexural strength, compressive strength, abrasion resistance, coefficient of luminous intensity, color, resistance to lens cracking, lens impact strength, and temperature cycling strength) requirements.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1.1 This specification covers nonplowable, retroreflective raised pavement markers for nighttime lane marking and delineation.
1.2 The values stated in inch-pound units are to be regarded as the standard, except where noted in the document. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3 The following precautionary caveat pertains only to the test methods portion, Section This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. , of this specification:
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
C778 Specification for Standard Sand
D5/D5M Test Method for Penetration of Bituminous Materials
D36/D36M Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
D71 Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)
D92 Test Method for Flash and Fire Points by Cleveland Open Cup Tester
D113 Test Method for Ductility of Asphalt Materials
D1785 Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
D3111 Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
D4402/D4402M Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
D5329 Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements
E177 Practice for Use of the Terms Precision and Bias in ASTM Test Methods
E284 Terminology of Appearance
E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
E808 Practice for Describing Retroreflection
E809 Practice for Measuring Photometric Characteristics of Retroreflectors
E811 Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions
Federal SpecificationTT-T-291 Thinner, Paint, Mineral Spirits, Regular and Odorless
ICS Number Code 93.080.20 (Road construction materials)
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM D4280-18, Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers, ASTM International, West Conshohocken, PA, 2018, www.astm.orgBack to Top