| Format | Pages | Price |   |
![]() |
3 | $46.00 | ![]() |
|
![]() |
Hardcopy (shipping and handling) | 3 | $46.00 | ![]() |
![]() |
Standard + Redline PDF Bundle ![]() |
6 | $54.00 | ![]() |
Historical Version(s) - view previous versions of standard
More D13.61 Standards Related Products Standard References
Significance and Use
5.1 Upon agreement between the purchaser and the seller, fabrics intended for this end use should meet all of the requirements listed in Table 1 of this performance specification.
5.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified upon agreement between the purchaser and the seller.
5.2.1 In such cases, any references to the specification shall specify that: “This fabric meets ASTM Specification D4119 except for the following characteristic(s).”
5.3 Where no prepurchase agreement has been reached between the purchaser and the seller, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric.
5.4 The uses and significance of particular properties and methods are discussed in the appropriate sections of the specified methods.
1. Scope
1.1 This performance specification covers knitted fabrics comprised of any textile fiber or mixture of fibers, used in men's and boy's dress shirts.
1.2 This performance specification is not applicable to knitted fabrics used for interlinings.
1.3 These requirements apply to both the length and width directions for those properties where fabric direction is pertinent.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
AATCC Methods
15 Colorfastness to Perspiration 16.3 Colorfastness to Light: Xenon-Arc 116 Colorfastness to Crocking: Rotary Vertical Crockmeter Method 124 Smoothness Appearance of Fabrics after Repeated Home Launderings 132 Colorfastness to Drycleaning 135 Dimensional Changes of Fabrics after Home Laundering 172 Colorfastness to Powdered Non-chlorine Bleach in Home Laundering 188 Colorfastness to Sodium Hypochlorite Bleach in Home Laundering 23 Colorfastness to Burnt Gas Fumes 61 Colorfastness to Laundering: Accelerated 8 Colorfastness to Crocking: Crockmeter Method 96 Dimensional Changes in Laundering of Woven and Knitted Textiles Except Wool Evaluation Procedure No. 1 Gray Scale For Color Change Evaluation Procedure No. 2 Gray Scale for Staining Evaluation Procedure No. 8 AATCC 9-Step Chromatic Transference ScaleFederal Standard
16 CFR, Chapter II--Consumer Product Safety Commission Subchapter D--Flammable Fabrics Act RegulationsMilitary Standard
MIL-STD-105D Sampling Procedures and Tables for Inspection by AttributesASTM Standards
D123 Terminology Relating to Textiles
D2594 Test Method for Stretch Properties of Knitted Fabrics Having Low Power
D2724 Test Methods for Bonded, Fused, and Laminated Apparel Fabrics
D3786 Test Method for Bursting Strength of Textile Fabrics--Diaphragm Bursting Strength Tester Method
D3787 Test Method for Bursting Strength of Textiles--Constant-Rate-of-Traverse (CRT) Ball Burst Test
D7022 Terminology Relating to Apparel
ICS Code
ICS Number Code 61.020 (Clothes)
UNSPSC Code
UNSPSC Code 53100000(Clothing)
Link Here | |||
Link to Active (This link will always route to the current Active version of the standard.) | |||
DOI: 10.1520/D4119-14
Citation Format
ASTM D4119-14, Standard Performance Specification for Men’s and Boys’ Knitted Dress Shirt Fabrics, ASTM International, West Conshohocken, PA, 2014, www.astm.org
Back to Top