You are being redirected because this document is part of your ASTM Compass® subscription.
    This document is part of your ASTM Compass® subscription.

    If you are an ASTM Compass Subscriber and this document is part of your subscription, you can access it for free at ASTM Compass
    ASTM D1153-12

    Standard Specification for Methyl Isobutyl Ketone (Withdrawn 2021)

    Withdrawn Standard: ASTM D1153-12 | Developed by Subcommittee: D01.35


      Format Pages Price  
    PDF 2 $54.00   ADD TO CART

    Translated Version(s): Russian

    ASTM License Agreement


    Withdrawn Rationale:

    This specification covers methyl isobutyl ketone (99.0 % grade).

    Formerly under the jurisdiction of Committee D01 on Paint and Related Coatings, Materials, and Applications, this specification was withdrawn in January 2021 in accordance with section 10.6.3 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

    1. Scope

    1.1 This specification covers methyl isobutyl ketone (99.0 % grade).

    1.2 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for materials listed in this specification.

    1.3 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.

    1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

    1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.



    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    D268 Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material

    D1078 Test Method for Distillation Range of Volatile Organic Liquids

    D1209 Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)

    D1296 Test Method for Odor of Volatile Solvents and Diluents

    D1353 Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products

    D1364 Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)

    D1476 Test Method for Heptane Miscibility of Lacquer Solvents

    D1613 Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products

    D3329 Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography

    D4052 Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

    D5386 Test Method for Color of Liquids Using Tristimulus Colorimetry

    E1 Specification for ASTM Liquid-in-Glass Thermometers

    E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

    E300 Practice for Sampling Industrial Chemicals

    U.S. Federal Specification

    PPP-C-2020 Chemicals, Liquid, Dry, and Paste: Packaging of Available from Standardization Documents Order Desk, DODSSP, Bldg. 4, Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098, http://dodssp.daps.dla.mil.


    Referencing This Standard
    Link Here
    Link to Active (This link will always route to the current Active version of the standard.)

    DOI: 10.1520/D1153-12

    Citation Format

    ASTM D1153-12, Standard Specification for Methyl Isobutyl Ketone (Withdrawn 2021), ASTM International, West Conshohocken, PA, 2012, www.astm.org

    Back to Top