ASTM B894 - 17
Standard Specification for ACuZinc5
| Format | Pages | Price | ||
 |
4 | $46.00 |  ADD TO CART |
|
 |
Hardcopy (shipping and handling) | 4 | $46.00 | ADD TO CART |
|
Standard + Redline PDF Bundle  |
8 | $54.00 | ADD TO CART |
Historical Version(s) - view previous versions of standard
More B02.04 Standards Related Products Standard References
Abstract
This specification covers AcuZinc5, zinc-copper-aluminum alloy die castings. The metal used in the manufacture of die castings shall be zinc alloy of a specified chemical composition conforming to the specified requirements. Tensile, yield strength, elongation, and hardness properties shall be determined by tension and hardness tests. The die castings shall be of uniform quality, free of injurious discontinuities that will adversely affect their serviceability.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1. Scope
1.1 This specification covers ACuZinc5, zinc-copper-aluminum alloy die castings. (UNS Z46541).3
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health and environmental practices, and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ISO Standards
ISO 3815-1 Zinc and zinc alloys Part 1: Analysis of solid samples by optical emission spectrometry ISO 3815-2Military Standard
MIL-P-116 Methods of Preservation MIL-STD-129NADCA Standard
NADCA Product Specification Standards for Die CastingsFederal Standards
Fed. Std. No. 123 Marking for Shipment (Civil Agencies)ASTM Standards
B892 Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings
B899 Terminology Relating to Non-ferrous Metals and Alloys
B949 Specification for General Requirements for Zinc and Zinc Alloy Products
E10 Test Method for Brinell Hardness of Metallic Materials
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
E536 Test Methods for Chemical Analysis of Zinc and Zinc Alloys
ICS Code
ICS Number Code 77.150.60 (Lead, zinc and tin products)
UNSPSC Code
UNSPSC Code 11101711(Non ferrous alloy)
Referencing This Standard
| Link Here | |||
| Link to Active (This link will always route to the current Active version of the standard.) | |||
DOI: 10.1520/B0894-17
Citation Format
ASTM B894-17, Standard Specification for ACuZinc5, ASTM International, West Conshohocken, PA, 2017, www.astm.org
Back to Top