| Format | Pages | Price |   |
![]() |
2 | $46.00 | ![]() |
|
![]() |
Hardcopy (shipping and handling) | 2 | $46.00 | ![]() |
Historical Version(s) - view previous versions of standard
More B07.04 Standards Related Products Standard References
Abstract
This specification covers the standard requirements for magnesium alloy anodes in the form of cast and extruded shapes for use in cathodic protection. Materials shall adhere to specified chemical composition requirements, the samples for analysis of which shall be taken either from the molten metal when the cast anode or extrusion ingot is poured, or from the finished anode. Anodes shall have a clean surface and be commercially free of dirt, slag, or other foreign material.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
Significance and Use
3.1 This specification is prescriptive and not performance in nature.
1. Scope
1.1 This specification covers magnesium alloy anodes in the form of cast and extruded shapes.
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
B951 Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought
B953 Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
B954 Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E55 Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
E88 Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
E527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
G97 Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
ICS Code
ICS Number Code 77.060 (Corrosion of metals)
UNSPSC Code
UNSPSC Code
Link Here | |||
Link to Active (This link will always route to the current Active version of the standard.) | |||
DOI: 10.1520/B0843-18E01
Citation Format
ASTM B843-18e1, Standard Specification for Magnesium Alloy Anodes for Cathodic Protection, ASTM International, West Conshohocken, PA, 2018, www.astm.org
Back to Top