If you are an ASTM Compass Subscriber and this document is part of your subscription, you can access it for free at ASTM Compass
    ASTM B1015 - 20

    Standard Practice for Form and Style of Standards Relating to Refined Nickel and Cobalt and Their Alloys

    Active Standard ASTM B1015 | Developed by Subcommittee: B02.07

    Book of Standards Volume: 02.04

      Format Pages Price  
    PDF 13 $60.00   ADD TO CART
    Hardcopy (shipping and handling) 13 $60.00   ADD TO CART

    1. Scope

    1.1 This practice covers the form and style for specifications under the jurisdiction of ASTM Subcommittee B02.07 Refined Nickel and Cobalt and Their Alloys. Anyone preparing new or revising existing specifications for this subcommittee shall follow the practices and procedures outlined herein.

    1.2 This practice is a supplement to the current edition of Form and Style for ASTM Standards (Form Manual)2. If there is a conflict between the documents, then this should be brought to the attention of B02.07. Until the conflict is resolved, the more stringent requirement of the two documents takes precedent.

    1.3 The word “specifications” will be used throughout this document to describe B02.07 standards because the majority of B02.07 standards are categorized as such. Nevertheless, the instruction herein applies to any standards under the jurisdiction of B02.07.

    1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    A488/A488M Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

    B84 Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors

    B880 Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys

    B899 Terminology Relating to Non-ferrous Metals and Alloys

    E6 Terminology Relating to Methods of Mechanical Testing

    E8/E8M Test Methods for Tension Testing of Metallic Materials

    E18 Test Methods for Rockwell Hardness of Metallic Materials

    E112 Test Methods for Determining Average Grain Size

    E139 Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials

    E165/E165M Practice for Liquid Penetrant Testing for General Industry

    E190 Test Method for Guided Bend Test for Ductility of Welds

    E213 Practice for Ultrasonic Testing of Metal Pipe and Tubing

    E228 Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer

    E290 Test Methods for Bend Testing of Material for Ductility

    E384 Test Method for Microindentation Hardness of Materials

    E426 Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys

    E571 Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products

    E1269 Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry

    E1282 Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials

    E1417/E1417M Practice for Liquid Penetrant Testing

    E1461 Test Method for Thermal Diffusivity by the Flash Method

    E1473 Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys

    G28 Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys

    G48 Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution

    G61 Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys

    Other Standards

    ASME BPVC IX Welding, Brazing, and Fusing Qualifications

    Referencing This Standard
    Link Here
    Link to Active (This link will always route to the current Active version of the standard.)

    DOI: 10.1520/B1015-20

    Citation Format

    ASTM B1015-20, Standard Practice for Form and Style of Standards Relating to Refined Nickel and Cobalt and Their Alloys, ASTM International, West Conshohocken, PA, 2020, www.astm.org

    Back to Top