ASTM A713 - 04(2017)
Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
| Format | Pages | Price | ||
 |
3 | $41.00 |  ADD TO CART |
|
 |
Hardcopy (shipping and handling) | 3 | $41.00 | ADD TO CART |
Historical Version(s) - view previous versions of standard
More A01.03 Standards Related Products Standard References Reprints and Permissions
Abstract
This specification deals with the general requirements for round carbon spring steel wire coils intended for the manufacture of mechanical springs and wire forms that are heat treated after fabrication. Heat treatment processes include austenitizing, quenching and tempering. The steel shall be made by the open-hearth, basic-oxygen, or electric-furnace process and the wire shall be thermally treated, or thermally treated and drawn. Product analysis, wrap testing, and chemical analysis shall be performed and materials shall conform to the requirements for chemical composition, metallurgical structure and mechanical properties such as tensile strength. Packaging of the coils of wire shall be by agreement between the manufacturer and the purchaser wherein the agreement shall include coil dimensions and weights, while marking and bar coding for identification shall be by tag securely attached to each coil of wire.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1. Scope
1.1 This specification covers round carbon spring steel wire in coils intended for the manufacture of mechanical springs and wire forms that are heat treated (austenitized, quenched, and tempered) after fabrication.
1.2 The values stated in inch-pound units are to be regarded as the standard.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
A370 Test Methods and Definitions for Mechanical Testing of Steel Products
A510 Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
A700 Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment
A941 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E30 Test Methods for Chemical Analysis of Steel, Cast Iron, Open-Hearth Iron, and Wrought Iron
E112 Test Methods for Determining Average Grain Size
E350 Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
E527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
ICS Code
ICS Number Code 77.140.25 (Spring steels)
UNSPSC Code
UNSPSC Code 31152200(Non electric iron and steel wire)
Referencing This Standard
| Link Here | |||
| Link to Active (This link will always route to the current Active version of the standard.) | |||
DOI: 10.1520/A0713-04R17
Citation Format
ASTM A713-04(2017), Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components, ASTM International, West Conshohocken, PA, 2017, www.astm.org
Back to Top