| ||Format||Pages||Price|| |
|8||$50.00||  ADD TO CART|
|Hardcopy (shipping and handling)||8||$50.00||  ADD TO CART|
1.1 This specification covers the manufacture and purchase requirements of products used for assembly and construction of circular reinforced corrugated steel manholes used in sewer and water works. Products covered by this specification are not normally used for the conveyance of sanitary or industrial wastes. The steel sheet used in fabrication of the manhole structures has a protective metallic coating of zinc (galvanizing), aluminum, 55 % aluminum-zinc alloy, or zinc-5 % aluminum-mischmetal alloy, or a polymer pre-coating.
1.2 Part I, Sections through , of this specification presents general requirements and requirements that are common to each corrugated steel product in the sections outlined in .
1.3 Part II of this specification presents specific requirements for each manhole product in the following section:
Steps and Ladders
1.4 Steel sheet with zinc, aluminized or polymeric coating may be specified for the fabrication of the manhole structures. Manhole structures made from sheets with composite coatings are always furnished with an approved coating.
Note 1: Pipe fabricated with polymeric coated sheet may be used for sanitary sewers and industrial applications.
Note 2: This specification is a manufacturing specification and purchase specification only and does not include requirements for backfill, or the relationship between field load conditions.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
A153/A153M Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
A563 Specification for Carbon and Alloy Steel Nuts
A615/A615M Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
A742/A742M Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
A760/A760M Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
A762/A762M Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
A885/A885M Specification for Steel Sheet, Zinc and Aramid Fiber Composite Coated for Corrugated Steel Sewer, Culvert, and Underdrain Pipe
A929/A929M Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
B633 Specification for Electrodeposited Coatings of Zinc on Iron and Steel
B695 Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
C33/C33M Specification for Concrete Aggregates
C39/C39M Test Method for Compressive Strength of Cylindrical Concrete Specimens
C150/C150M Specification for Portland Cement
C309 Specification for Liquid Membrane-Forming Compounds for Curing Concrete
C497 Test Methods for Concrete Pipe, Manhole Sections, or Tile
C595/C595M Specification for Blended Hydraulic Cements
C618 Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
C1619 Specification for Elastomeric Seals for Joining Concrete Structures
D1056 Specification for Flexible Cellular Materials--Sponge or Expanded Rubber
AASHTO StandardsT241 Test for Helical Continuous Welded Seam Corrugated Steel Pipe T249 Test for Helical Lock Seam Corrugated Pipe
ICS Number Code 93.030 (External sewage systems)
UNSPSC Code 30121713(Manhole cover); 11101704(Steel)
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM A1105-17, Standard Specification for Corrugated Steel Manhole Assemblies, ASTM International, West Conshohocken, PA, 2017, www.astm.orgBack to Top