Research Report to A1038 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method

Research Report to A1038 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method

Research Report to A630 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate

Research Report to A90/A90M Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

Research Report to A428/A428M Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles

Research Report to A1073/A1073M Standard Practice for Using Hand Micrometers to Measure the Thickness of Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet

Research Report to A773/A773M Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs

Research Report to A343/A343M Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame

Research Report to B982 Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis

Research Report to B982 Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis

Research Report to B647 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage

Research Report to B648 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor

Research Report to B769 Standard Test Method for Shear Testing of Aluminum Alloys

Research Report to B557 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products

Research Report to B557 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products

Research Report to B975 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)

Research Report to B636/B636M Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer

Research Report to B311 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity

Research Report to B771 Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides

Research Report to E194 Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders

Research Report to B330 Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability

Research Report to B761 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation

Research Report to B294 Standard Test Method for Hardness Testing of Cemented Carbides

Research Report to B886 Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides

Research Report to B887 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides

Research Report to B795 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials

Research Report to B527 Standard Test Method for Tap Density of Metal Powders and Compounds

Research Report to B931 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts

Research Report to B796 Standard Test Method for Nonmetallic Inclusion Content of Ferrous Powders Intended for Powder Forging (PF) Applications

Research Report to B797 Standard Test Method for Surface Finger-Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (PF) Steel Parts

Research Report to C1012/C1012M Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution

Research Report to C452 Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate

Research Report to C359 Standard Test Method for Early Stiffening of Hydraulic Cement (Mortar Method)

Research Report to C1608 Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste

Research Report to C109/C109M Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

Research Report to C1012/C1012M Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution

Research Report to C1702 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry

Research Report to C110 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

Research Report to C110 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

Research Report to C110 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

Research Report to C110 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

Research Report to C110 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

Research Report to C25 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime

Research Report to C110 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

Research Report to C863 Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures

Research Report to C1099 Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures

Research Report to C831 Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes

Research Report to C604 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer

Research Report to C1445 Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table

Research Report to C24 Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High-Alumina Refractory Materials

Research Report to C198 Standard Test Method for Cold Bonding Strength of Refractory Mortar

Research Report to C1446 Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories

Research Report to C1445 Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table

Research Report to C179 Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens

Research Report to C704/C704M Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature

Research Report to C311/C311M Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete

Research Report to C233/C233M Standard Test Method for Air-Entraining Admixtures for Concrete

Research Report to C39/C39M Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

Research Report to C311/C311M Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete

Research Report to C1084 Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete

Research Report to C666/C666M Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing

Research Report to C1399/C1399M Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete

Research Report to C143/C143M Standard Test Method for Slump of Hydraulic-Cement Concrete

Research Report to C796/C796M Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam

Research Report to C1064/C1064M Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete

Research Report to C1580 Standard Test Method for Water-Soluble Sulfate in Soil

Research Report to C1040/C1040M Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods

Research Report to C403/C403M Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance

Research Report to C1701/C1701M Standard Test Method for Infiltration Rate of In Place Pervious Concrete

Research Report to C928/C928M Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs

Research Report to C1550 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)

Research Report to C1708/C1708M Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements

Research Report to C1708/C1708M Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements

Research Report to C1708/C1708M Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements

Research Report to C1708/C1708M Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements

Research Report to C1747/C1747M Standard Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion

Research Report to C535 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

Research Report to C1170/C1170M Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table

Research Report to C567/C567M Standard Test Method for Determining Density of Structural Lightweight Concrete

Research Report to C1435/C1435M Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer

Research Report to C535 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

Research Report to C1708/C1708M Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements

Research Report to C989/C989M Standard Specification for Slag Cement for Use in Concrete and Mortars

Research Report to C231/C231M Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

Research Report to C473 Standard Test Methods for Physical Testing of Gypsum Panel Products

Research Report to C474 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction

Research Report to C471M Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)

Research Report to C225 Standard Test Methods for Resistance of Glass Containers to Chemical Attack

Research Report to C429 Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture

Research Report to C1279 Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass

Research Report to C1203 Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel

Research Report to C1279 Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass

Research Report to F218 Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass

Research Report to C1781/C1781M Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems

Research Report to C67/C67M Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile

Research Report to C335/C335M Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation

Research Report to C1134 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion

Research Report to C421 Standard Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation

Research Report to C240 Standard Test Methods for Testing Cellular Glass Insulation Block

Research Report to C166 Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement

Research Report to C356 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat

Research Report to E96/E96M Standard Test Methods for Water Vapor Transmission of Materials

Research Report to C871 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions

Research Report to C167 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations

Research Report to C335/C335M Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation

Research Report to C1374 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation

Research Report to C1374 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation

Research Report to C1104/C1104M Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation

Research Report to C303 Standard Test Method for Dimensions and Density of Preformed Block and Board–Type Thermal Insulation

Research Report to C871 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions

Research Report to C1574 Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation

Research Report to C1427 Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form

Research Report to C411 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation

Research Report to C203 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation

Research Report to C209 Standard Test Methods for Cellulosic Fiber Insulating Board

Research Report to C1667 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels

Research Report to C1289 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board

Research Report to C1512 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products

Research Report to C739 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation

Research Report to C1303/C1303M Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation

Research Report to C1497 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation

Research Report to E96/E96M Standard Test Methods for Water Vapor Transmission of Materials

Research Report to C1763 Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials

Research Report to C209 Standard Test Methods for Cellulosic Fiber Insulating Board

Research Report to C550 Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation

Research Report to E96/E96M Standard Test Methods for Water Vapor Transmission of Materials

Research Report to C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

Research Report to C1122/C1122M Standard Test Method for Wet Volume of Asbestos

Research Report to C1124/C1124M Standard Test Method for Kerosene Retention of Asbestos

Research Report to C1162/C1162M Standard Test Method for Loose Density of Asbestos

Research Report to C1606 Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware

Research Report to C373 Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products

Research Report to C1016 Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material

Research Report to C661 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer

Research Report to C1183/C1183M Standard Test Method for Extrusion Rate of Elastomeric Sealants

Research Report to C731 Standard Test Method for Extrudability, After Package Aging, of Latex Sealants

Research Report to C1016 Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material

Research Report to C1253 Standard Test Method for Determining the Outgassing Potential of Sealant Backing

Research Report to D2202 Standard Test Method for Slump of Sealants

Research Report to C1247 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids

Research Report to C1241 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure

Research Report to C1246 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure

Research Report to C1501 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures

Research Report to C1635 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension

Research Report to C1501 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures

Research Report to C1519 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures

Research Report to C794 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants

Research Report to C1382 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints

Research Report to C1735 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation

Research Report to C1735 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation

Research Report to C1108 Standard Test Method for Plutonium by Controlled-Potential Coulometry

Research Report to C1457 Standard Test Method for Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction

Research Report to C1430 Standard Test Method for Determination of Uranium, Oxygen to Uranium (O/U), and Oxygen to Metal (O/M) in Sintered Uranium Dioxide and Gadolinia-Uranium Dioxide Pellets by Atmospheric Equilibration

Research Report to C1539 Standard Test Method for Determination of Technetium-99 in Uranium Hexafluoride by Liquid Scintillation Counting

Research Report to C1742 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double Standard Single-Collector Gas Mass Spectrometer Method

Research Report to C1259 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration

Research Report to C1161 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature

Research Report to C1322 Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics

Research Report to C1326 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics

Research Report to C1674 Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures

Research Report to D3359 Standard Test Methods for Rating Adhesion by Tape Test

Research Report to D3125 Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid

Research Report to D1614 Standard Test Method for Alkalinity in Acetone

Research Report to D2369 Standard Test Method for Volatile Content of Coatings

Research Report to D1363 Standard Test Method for Permanganate Time of Acetone and Methanol

Research Report to D4145 Standard Test Method for Coating Flexibility of Prepainted Sheet

Research Report to D4367 Standard Test Method for Benzene in Hydrocarbon Solvents by Gas Chromatography

Research Report to D1613 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products

Research Report to D3893 Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography

Research Report to D1353 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products

Research Report to D4457 Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph

Research Report to D4563 Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint

Research Report to D4487 Standard Test Methods for Analysis of Calcium Borosilicate

Research Report to D4450 Standard Test Method for Analysis of Zinc Hydroxy Phosphite Pigment

Research Report to D1364 Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)

Research Report to D4828 Standard Test Methods for Practical Washability of Organic Coatings

Research Report to D4838 Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints

Research Report to D5007 Standard Test Method for Wet-to-Dry Hiding Change

Research Report to D4141/D4141M Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings

Research Report to D4141/D4141M Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings

Research Report to D5326 Standard Test Method for Color Development in Tinted Latex Paints

Research Report to D5399 Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography

Research Report to D5401 Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood

Research Report to D5910 Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography

Research Report to D3257 Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography

Research Report to D4017 Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method

Research Report to D5909 Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance

Research Report to D5974 Standard Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography

Research Report to D1065 Standard Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products

Research Report to D6038 Standard Test Methods for Determining the Compatibility of Resin/Solvent Mixtures by Precipitation Temperature (Cloud Point)

Research Report to D6166 Standard Test Method for Color of Pine Chemicals and Related Products (Instrumental Determination of Gardner Color)

Research Report to D1209 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)

Research Report to D6267/D6267M Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures

Research Report to D6387 Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography

Research Report to D6090 Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method)

Research Report to E28 Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus

Research Report to D5008 Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography

Research Report to D5895 Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders

Research Report to D6229 Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography

Research Report to D1078 Standard Test Method for Distillation Range of Volatile Organic Liquids

Research Report to D6762 Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings

Research Report to D5768 Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids

Research Report to D7189 Standard Test Method for Relative Mileage of News Ink on Newsprint

Research Report to D1316 Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer

Research Report to D4060 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser

Research Report to D4960 Standard Test Method for Evaluation of Color for Thermoplastic Traffic Marking Materials

Research Report to D2066 Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions

Research Report to D7358 Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit

Research Report to D7245 Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating

Research Report to D7305 Standard Test Method for Reflection Density of Printed Matter

Research Report to D6736 Standard Test Method for Burnish Resistance of Latex Paints

Research Report to D4446/D4446M Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments

Research Report to D6132 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage

Research Report to D7245 Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating

Research Report to D7514 Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment

Research Report to D4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

Research Report to D6900 Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate

Research Report to D3274 Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation

Research Report to D1214 Standard Test Method for Sieve Analysis of Glass Spheres

Research Report to D7639 Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence

Research Report to D1155 Standard Test Method for Roundness of Glass Spheres

Research Report to D7488 Standard Test Method for Open Time of Latex Paints

Research Report to D4796 Standard Test Method for Bond Strength of Thermoplastic Pavement Marking Materials

Research Report to D7682 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty

Research Report to D7681 Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer

Research Report to D4361 Standard Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Roller Tackmeter

Research Report to D7767 Standard Test Method to Measure Volatiles from Radiation Curable Acrylate Monomers, Oligomers, and Blends and Thin Coatings Made from Them

Research Report to D7735 Standard Test Method for Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures

Research Report to D7786 Standard Test Method for Determining Enamel Holdout

Research Report to D3273 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber

Research Report to D7234 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers

Research Report to D7804 Standard Test Method for Fiber Shedding of Paint Roller Covers

Research Report to D7682 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty

Research Report to D4797 Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Pavement Marking

Research Report to D6906 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence

Research Report to D1353 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products

Research Report to D7127 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument

Research Report to D6037 Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings

Research Report to D6037 Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings

Research Report to D7855/D7855M Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation

Research Report to D6583 Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption

Research Report to D7786 Standard Test Method for Determining Enamel Holdout

Research Report to D4446/D4446M Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments

Research Report to D7514 Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment

Research Report to D4417 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel

Research Report to D6886 Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography

Research Report to D8020 Standard Test Method for Freeze-Thaw Viscosity Stability of Water-Based Inks and Ink Vehicles

Research Report to D2191 Standard Test Method for Acetaldehyde Content of Vinyl Acetate

Research Report to D5178 Standard Test Method for Mar Resistance of Organic Coatings

Research Report to D1209 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)

Research Report to D2624 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels

Research Report to D3427 Standard Test Method for Air Release Properties of Hydrocarbon Based Oils

Research Report to D910 Standard Specification for Leaded Aviation Gasolines

Research Report to D3120 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry

Research Report to D3702 Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine

Research Report to D3705 Standard Test Method for Misting Properties of Lubricating Fluids

Research Report to D3342 Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water

Research Report to D3944 Standard Test Method for Solidification Point of Petroleum Wax

Research Report to D2670 Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)

Research Report to D2893 Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils

Research Report to D187 Standard Test Method for Burning Quality of Kerosene

Research Report to D4292 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke

Research Report to D4290 Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions

Research Report to D1322 Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel

Research Report to D4425 Standard Test Method for Oil Separation from Lubricating Grease by Centrifuging (Koppers Method)

Research Report to D3701 Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry

Research Report to D4048 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease

Research Report to D4422 Standard Test Method for Ash in Analysis of Petroleum Coke

Research Report to D4530 Standard Test Method for Determination of Carbon Residue (Micro Method)

Research Report to D3240 Standard Test Method for Undissolved Water In Aviation Turbine Fuels

Research Report to D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

Research Report to D1321 Standard Test Method for Needle Penetration of Petroleum Waxes

Research Report to D1160 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure

Research Report to D4055 Standard Test Method for Pentane Insolubles by Membrane Filtration

Research Report to D4684 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

Research Report to D4739 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration

Research Report to D1552 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)

Research Report to D4870 Standard Test Method for Determination of Total Sediment in Residual Fuels

Research Report to D892 Standard Test Method for Foaming Characteristics of Lubricating Oils

Research Report to D4953 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)

Research Report to D4684 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

Research Report to D2603 Standard Test Method for Sonic Shear Stability of Polymer-Containing Oils

Research Report to D5134 Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography

Research Report to D5501 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography

Research Report to D4860 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)

Research Report to D3948 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer

Research Report to D4684 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

Research Report to D129 Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)

Research Report to D5185 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

Research Report to D5059 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy

Research Report to D665 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water

Research Report to D5293 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10 °C and –35 °C Using Cold-Cranking Simulator

Research Report to D4953 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)

Research Report to D4815 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography

Research Report to D5453 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

Research Report to D5442 Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography

Research Report to D2156 Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels

Research Report to D446 Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers

Research Report to D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

Research Report to D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

Research Report to D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

Research Report to D5621 Standard Test Method for Sonic Shear Stability of Hydraulic Fluids

Research Report to D5183 Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine

Research Report to D5705 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils

Research Report to D5384 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)

Research Report to D5762 Standard Test Method for Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence

Research Report to D5853 Standard Test Method for Pour Point of Crude Oils

Research Report to D5771 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)

Research Report to D5845 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy

Research Report to D1840 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry

Research Report to D4683 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C

Research Report to D4485 Standard Specification for Performance of Active API Service Category Engine Oils

Research Report to D5769 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry

Research Report to D5452 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration

Research Report to D5972 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)

Research Report to D4052 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

Research Report to D5186 Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels By Supercritical Fluid Chromatography

Research Report to D6335 Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test

Research Report to D5763 Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware

Research Report to D4684 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

Research Report to D4045 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry

Research Report to D2887 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography

Research Report to D4171 Standard Specification for Fuel System Icing Inhibitors

Research Report to D2272 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel

Research Report to D5706 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

Research Report to D6078 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)

Research Report to D6159 Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography

Research Report to D6160 Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography

Research Report to D6120 Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature

Research Report to D6217 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration

Research Report to D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

Research Report to D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

Research Report to D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

Research Report to D6278 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus

Research Report to D2622 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry

Research Report to D6277 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy

Research Report to D6296 Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography

Research Report to D1264 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases

Research Report to D6304 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration

Research Report to D5968 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121 °C

Research Report to D2500 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels

Research Report to D6352 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography

Research Report to D6379 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection

Research Report to D6375 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method

Research Report to D5133 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique

Research Report to D2711 Standard Test Method for Demulsibility Characteristics of Lubricating Oils

Research Report to D6443 Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)

Research Report to D6417 Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography

Research Report to D6371 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels

Research Report to D6425 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine

Research Report to D86 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure

Research Report to D5453 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

Research Report to D2885 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique

Research Report to D6470 Standard Test Method for Salt in Crude Oils (Potentiometric Method)

Research Report to D5293 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10 °C and –35 °C Using Cold-Cranking Simulator

Research Report to D6481 Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy

Research Report to D5800 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method

Research Report to D6468 Standard Test Method for High Temperature Stability of Middle Distillate Fuels

Research Report to D6450 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester

Research Report to D5453 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

Research Report to D381 Standard Test Method for Gum Content in Fuels by Jet Evaporation

Research Report to D4814 Standard Specification for Automotive Spark-Ignition Engine Fuel

Research Report to D3230 Standard Test Method for Salts in Crude Oil (Electrometric Method)

Research Report to D4485 Standard Specification for Performance of Active API Service Category Engine Oils

Research Report to D5453 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

Research Report to D2624 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels

Research Report to D6550 Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography

Research Report to D6557 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils

Research Report to D6616 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 °C

Research Report to D2983 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer

Research Report to D6595 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry

Research Report to D6200 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis

Research Report to D1218 Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids

Research Report to D6558 Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks

Research Report to D6559 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks

Research Report to D4741 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer

Research Report to D4741 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer

Research Report to D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

Research Report to D6749 Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)

Research Report to D3831 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy

Research Report to D6591 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Middle Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection

Research Report to D6667 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence

Research Report to D5762 Standard Test Method for Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence

Research Report to D5771 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)

Research Report to D5772 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method)

Research Report to D5773 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)

Research Report to D5133 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique

Research Report to D6732 Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry

Research Report to D6728 Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry

Research Report to D4684 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

Research Report to D6730 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100–Metre Capillary (with Precolumn) High-Resolution Gas Chromatography

Research Report to D6729 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography

Research Report to D6733 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography

Research Report to D6756 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer

Research Report to D6748 Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)

Research Report to D2500 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels

Research Report to D1840 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry

Research Report to D4629 Standard Test Method for Trace Nitrogen in Liquid Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection

Research Report to D4310 Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils

Research Report to D6824 Standard Test Method for Determining Filterability of Aviation Turbine Fuel

Research Report to D6447 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis

Research Report to D2893 Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils

Research Report to D6426 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils

Research Report to D6824 Standard Test Method for Determining Filterability of Aviation Turbine Fuel

Research Report to D6839 Standard Test Method for Hydrocarbon Types, Oxygenated Compounds, and Benzene in Spark Ignition Engine Fuels by Gas Chromatography

Research Report to D3120 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry

Research Report to D2622 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry

Research Report to D6810 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry

Research Report to D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration

Research Report to D7039 Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

Research Report to D7042 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)

Research Report to D7041 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbons and Hydrocarbon-Oxygenate Blends by Gas Chromatography with Flame Photometric Detection

Research Report to D7040 Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

Research Report to D7095 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip

Research Report to D5706 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

Research Report to D7097 Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test—TEOST MHT

Research Report to D5133 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique

Research Report to D7111 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

Research Report to D7110 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures

Research Report to D2386 Standard Test Method for Freezing Point of Aviation Fuels

Research Report to D2624 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels

Research Report to D7171 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy

Research Report to D6425 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine

Research Report to D86 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure

Research Report to D7094 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester

Research Report to D7109 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles

Research Report to D5864 Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components

Research Report to D7217 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

Research Report to D7224 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer

Research Report to D7212 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter

Research Report to D2624 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels

Research Report to D4530 Standard Test Method for Determination of Carbon Residue (Micro Method)

Research Report to D7214 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation

Research Report to D7220 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry

Research Report to D7236 Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)

Research Report to D6895 Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100 °C

Research Report to D6821 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer

Research Report to D5304 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure

Research Report to D4951 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

Research Report to D6890 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber

Research Report to D6584 Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography

Research Report to D7279 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer

Research Report to D6549 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)

Research Report to D6482 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)

Research Report to D6895 Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100 °C

Research Report to D7303 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry

Research Report to D7317 Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)

Research Report to D7328 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection

Research Report to D4684 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

Research Report to D4684 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

Research Report to D7319 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography

Research Report to D7318 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration

Research Report to D5706 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

Research Report to D87 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)

Research Report to D892 Standard Test Method for Foaming Characteristics of Lubricating Oils

Research Report to D5191 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)

Research Report to D7346 Standard Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels

Research Report to D7344 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)

Research Report to D2622 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry

Research Report to D7214 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation

Research Report to D7371 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)

Research Report to D7397 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Miniaturized Optical Method)

Research Report to D1662 Standard Test Method for Active Sulfur in Cutting Oils

Research Report to D6973 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump

Research Report to D4294 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry

Research Report to D7215 Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels

Research Report to D4739 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration

Research Report to D5001 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)

Research Report to D7347 Standard Test Method for Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography

Research Report to D7170 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method

Research Report to D7416 Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscometer) Integrated Tester

Research Report to D7280 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration

Research Report to D6751 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels

Research Report to D6378 Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)

Research Report to D5293 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10 °C and –35 °C Using Cold-Cranking Simulator

Research Report to D4684 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

Research Report to D7463 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water

Research Report to D7483 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer

Research Report to D7501 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)

Research Report to D7528 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus

Research Report to D7060 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)

Research Report to D7157 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)

Research Report to D7542 Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime

Research Report to D1401 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids

Research Report to D2272 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel

Research Report to D7412 Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

Research Report to D7414 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

Research Report to D7415 Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

Research Report to D3828 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester

Research Report to D4683 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C

Research Report to D7501 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)

Research Report to D2983 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer

Research Report to D7546 Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor

Research Report to D7112 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)

Research Report to D2619 Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)

Research Report to D2983 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer

Research Report to D7589 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine

Research Report to D5291 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants

Research Report to D2624 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels

Research Report to D7563 Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel

Research Report to D7096 Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography

Research Report to D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester

Research Report to D7420 Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

Research Report to D7524 Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method

Research Report to D2638 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer

Research Report to D7043 Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump

Research Report to D1403 Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment

Research Report to D5187 Standard Test Method for Determination of Crystallite Size (Lc) of Calcined Petroleum Coke by X-Ray Diffraction

Research Report to D7500 Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 °C to 735 °C by Gas Chromatography

Research Report to D7622 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction

Research Report to D7527 Standard Test Method for Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep Voltammetry

Research Report to D7594 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

Research Report to D7619 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter

Research Report to D7596 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester

Research Report to D6890 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber

Research Report to D7620 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection

Research Report to D7417 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)

Research Report to D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester

Research Report to D2270 Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 °C and 100 °C

Research Report to D3240 Standard Test Method for Undissolved Water In Aviation Turbine Fuels

Research Report to D7321 Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration

Research Report to D7691 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

Research Report to D6079 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)

Research Report to D7687 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration

Research Report to D7213 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 °C to 615 °C by Gas Chromatography

Research Report to D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration

Research Report to D7398 Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 °C to 615 °C by Gas Chromatography

Research Report to D2699 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel

Research Report to D6743 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids

Research Report to D7757 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

Research Report to D7220 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry

Research Report to D7591 Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography

Research Report to D7753 Standard Test Method for Hydrocarbon Types and Benzene in Light Petroleum Distillates by Gas Chromatography

Research Report to D5771 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)

Research Report to D7042 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)

Research Report to D7042 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)

Research Report to D7346 Standard Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels

Research Report to D1401 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids

Research Report to D1322 Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel

Research Report to D7061 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device

Research Report to D5501 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography

Research Report to D7042 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)

Research Report to D7577 Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends

Research Report to D7795 Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration

Research Report to D6584 Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography

Research Report to D2699 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel

Research Report to D7319 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography

Research Report to D2887 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography

Research Report to D2887 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography

Research Report to D7756 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection

Research Report to D7872 Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels

Research Report to D7039 Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

Research Report to D1160 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure

Research Report to D4683 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C

Research Report to D7873 Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method)

Research Report to D2163 Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography

Research Report to D5188 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)

Research Report to D7042 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)

Research Report to D7279 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer

Research Report to D7946 Standard Test Method for Initial pH (i-pH)-Value of Petroleum Products

Research Report to D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

Research Report to D7525 Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)

Research Report to D6667 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence

Research Report to D5800 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method

Research Report to D3241 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels

Research Report to D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

Research Report to D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

Research Report to D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

Research Report to D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

Research Report to D2532 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants

Research Report to D7972 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature

Research Report to D1160 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure

Research Report to D1160 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure

Research Report to D7861 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy

Research Report to D6423 Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends

Research Report to D7945 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer

Research Report to D613 Standard Test Method for Cetane Number of Diesel Fuel Oil

Research Report to D7918 Standard Test Method for Measurement of Flow Properties and Evaluation of Wear, Contaminants, and Oxidative Properties of Lubricating Grease by Die Extrusion Method and Preparation

Research Report to D3240 Standard Test Method for Undissolved Water In Aviation Turbine Fuels

Research Report to D7798 Standard Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538 °C by Ultra Fast Gas Chromatography (UF GC)

Research Report to D7463 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water

Research Report to D1319 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption

Research Report to D5580 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography

Research Report to D5580 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography

Research Report to D5769 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry

Research Report to D6550 Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography

Research Report to D6839 Standard Test Method for Hydrocarbon Types, Oxygenated Compounds, and Benzene in Spark Ignition Engine Fuels by Gas Chromatography

Research Report to D4815 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography

Research Report to D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

Research Report to D2983 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer

Research Report to D7795 Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration

Research Report to D7342 Standard Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test)

Research Report to D8022 Standard Test Method for Roll Stability of Lubricating Grease in Presence of Water (Wet Roll Stability Test)

Research Report to D7423 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection

Research Report to D7576 Standard Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography

Research Report to D5188 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)

Research Report to D7279 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer

Research Report to D1321 Standard Test Method for Needle Penetration of Petroleum Waxes

Research Report to D4742 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)

Research Report to D7042 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)

Research Report to D1552 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)

Research Report to D7097 Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test—TEOST MHT

Research Report to D8045 Standard Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration

Research Report to D8073 Standard Test Method for Determination of Water Separation Characteristics of Aviation Turbine Fuel by Small Scale Water Separation Instrument

Research Report to D8070 Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay

Research Report to D5707 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

Research Report to D7751 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis

Research Report to C747 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance

Research Report to D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

Research Report to D7344 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)

Research Report to D8092 Standard Test Method for Field Determination of Kinematic Viscosity Using a Microchannel Viscometer

Research Report to D8110 Standard Test Method for Elemental Analysis of Distillate Products by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)

Research Report to D7918 Standard Test Method for Measurement of Flow Properties and Evaluation of Wear, Contaminants, and Oxidative Properties of Lubricating Grease by Die Extrusion Method and Preparation

Research Report to D8126 Standard Test Method for Efficient Basicity Determination by Potentiometric Hydrochloric Acid Titration

Research Report to D7043 Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump

Research Report to D8120 Standard Test Method for Ferrous Debris Quantification

Research Report to D8127 Standard Test Method for Coupled Particulate and Elemental Analysis using X-ray Fluorescence (XRF) for In-Service Lubricants

Research Report to D8148 Standard Test Method for Spectroscopic Determination of Haze in Fuels

Research Report to D8150 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography

Research Report to D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration

Research Report to D2699 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel

Research Report to D7796 Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography

Research Report to D3241 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels

Research Report to D6425 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine

Research Report to D4929 Standard Test Method for Determination of Organic Chloride Content in Crude Oil

Research Report to D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester

Research Report to D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester

Research Report to D3828 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester

Research Report to D5504 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence

Research Report to D1188 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples

Research Report to D1856 Standard Test Method for Recovery of Asphalt From Solution by Abson Method

Research Report to D3042 Standard Test Method for Insoluble Residue in Carbonate Aggregates

Research Report to D5581 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)

Research Report to D6390 Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures

Research Report to D5581 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)

Research Report to D3963/D3963M Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars

Research Report to D632 Standard Specification for Sodium Chloride

Research Report to D546 Standard Test Method for Sieve Analysis of Mineral Filler for Asphalt Paving Mixtures

Research Report to D4792/D4792M Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions

Research Report to D6703 Standard Test Method for Automated Heithaus Titrimetry

Research Report to D6752/D6752M Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method

Research Report to D3549/D3549M Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens

Research Report to D4280 Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers

Research Report to D545 Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)

Research Report to D7115 Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading

Research Report to D6928 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

Research Report to D7428 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

Research Report to D7553 Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide

Research Report to D2950/D2950M Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods

Research Report to D7113/D7113M Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods

Research Report to D7553 Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide

Research Report to D7496 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer

Research Report to D7496 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer

Research Report to D7226 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer

Research Report to D7226 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer

Research Report to D7313 Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry

Research Report to D4208 Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method

Research Report to D4326 Standard Test Method for Major and Minor Elements in Coal and Coke Ash By X-Ray Fluorescence

Research Report to D4606 Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method

Research Report to D2492 Standard Test Method for Forms of Sulfur in Coal

Research Report to D3302/D3302M Standard Test Method for Total Moisture in Coal

Research Report to D5515 Standard Test Method for Determination of the Swelling Properties of Bituminous Coal Using a Dilatometer

Research Report to D3173/D3173M Standard Test Method for Moisture in the Analysis Sample of Coal and Coke

Research Report to D5341/D5341M Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR)

Research Report to D6316 Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke

Research Report to D2961/D2961M Standard Test Method for Single-Stage Total Moisture Less than 15 % in Coal Reduced to 2.36-mm (No. 8 Sieve) Topsize

Research Report to D5865 Standard Test Method for Gross Calorific Value of Coal and Coke

Research Report to D6414 Standard Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption

Research Report to D6722 Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis

Research Report to D5865 Standard Test Method for Gross Calorific Value of Coal and Coke

Research Report to D6357 Test Methods for Determination of Trace Elements in Coal, Coke, & Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, & Graphite Furnace Atomic Absorption Spectrometry

Research Report to D6721 Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry

Research Report to D7348 Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues

Research Report to D6349 Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry

Research Report to D5016 Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption

Research Report to D5373 Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke

Research Report to D6349 Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry

Research Report to D7348 Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues

Research Report to D2799 Standard Test Method for Microscopical Determination of the Maceral Composition of Coal

Research Report to D7582 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis

Research Report to D3173/D3173M Standard Test Method for Moisture in the Analysis Sample of Coal and Coke

Research Report to D409/D409M Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method

Research Report to D4239 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion

Research Report to D4239 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion

Research Report to D7708 Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks

Research Report to D5341/D5341M Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR)

Research Report to D720/D720M Standard Test Method for Free-Swelling Index of Coal

Research Report to D5373 Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke

Research Report to D3402/D3402M Standard Test Method for Tumbler Test for Coke

Research Report to D5373 Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke

Research Report to D198 Standard Test Methods of Static Tests of Lumber in Structural Sizes

Research Report to D4616 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch

Research Report to D4892 Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)

Research Report to D146/D146M Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing

Research Report to D146/D146M Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing

Research Report to D5147/D5147M Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material

Research Report to D5147/D5147M Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material

Research Report to D5147/D5147M Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material

Research Report to D5147/D5147M Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material

Research Report to D2318 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch

Research Report to D7635/D7635M Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement

Research Report to D7654/D7654M Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer

Research Report to D36/D36M Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)

Research Report to D7635/D7635M Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement

Research Report to E1918 Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field

Research Report to D1676 Standard Test Methods for Film-Insulated Magnet Wire

Research Report to D2671 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use

Research Report to D3032 Standard Test Methods for Hookup Wire Insulation

Research Report to D350 Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation

Research Report to D2671 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use

Research Report to D149 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies

Research Report to D2671 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use

Research Report to D3032 Standard Test Methods for Hookup Wire Insulation

Research Report to D3145 Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method

Research Report to D7148 Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System

Research Report to D3332 Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines

Research Report to D2658 Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)

Research Report to D3953 Standard Specification for Strapping, Flat Steel and Seals

Research Report to D3950 Standard Specification for Strapping, Nonmetallic (and Joining Methods)

Research Report to D3580 Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products

Research Report to D3103 Standard Test Method for Thermal Insulation Performance of Distribution Packages

Research Report to D7860 Standard Test Methods for Measurement of Torque Retention for Child Resistant and Non-Child Resistant Packages with Continuous Thread Closures Using Automated Torque Testing Equipment

Research Report to D297 Standard Test Methods for Rubber Products—Chemical Analysis

Research Report to D471 Standard Test Method for Rubber Property—Effect of Liquids

Research Report to D3616 Standard Test Method for Rubber—Determination of Gel, Swelling Index, and Dilute Solution Viscosity

Research Report to D4075 Standard Test Methods for Rubber Compounding Materials—Flame Atomic Absorption Analysis—Determination of Metals

Research Report to D3900 Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry

Research Report to D1415 Standard Test Method for Rubber Property—International Hardness

Research Report to D624 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers

Research Report to D531 Standard Test Method for Rubber Property—Pusey and Jones Indentation

Research Report to D2240 Standard Test Method for Rubber Property—Durometer Hardness

Research Report to D991 Standard Test Method for Rubber Property—Volume Resistivity Of Electrically Conductive and Antistatic Products

Research Report to D1053 Standard Test Methods for Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics

Research Report to D1329 Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)

Research Report to D813 Standard Test Method for Rubber Deterioration—Crack Growth

Research Report to D3389 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)

Research Report to D1646 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)

Research Report to D575 Standard Test Methods for Rubber Properties in Compression

Research Report to D3900 Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry

Research Report to D3194 Standard Test Method for Rubber From Natural Sources—Plasticity Retention Index (PRI)

Research Report to D3188 Standard Test Methods for Rubber—Evaluation of IIR (Isobutene-Isoprene Rubber)

Research Report to D471 Standard Test Method for Rubber Property—Effect of Liquids

Research Report to D5902 Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value

Research Report to D5963 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)

Research Report to D3403 Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber)

Research Report to D6047 Standard Test Methods for Rubber, Raw—Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers

Research Report to D6049 Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates

Research Report to D5051 Standard Test Method for Rubber Compounding Materials—Benzothiazyl Disulfide (MBTS)—Assay

Research Report to D6147 Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression

Research Report to D3484 Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber)

Research Report to D6370 Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)

Research Report to D2240 Standard Test Method for Rubber Property—Durometer Hardness

Research Report to D6515 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending

Research Report to D7426 Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound

Research Report to D7427 Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Hevea Natural Rubber and Its Products Derived from Latex

Research Report to D412 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension

Research Report to D6741 Standard Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Sulfur Content

Research Report to D6740 Standard Test Method for Silanes Used in Rubber Formulations(bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition

Research Report to D6843 Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC)

Research Report to D6844 Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by High Performance Liquid Chromatography (HPLC)

Research Report to D7661 Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms

Research Report to D3389 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)

Research Report to D6738 Standard Test Method for Precipitated Silica—Volatile Content

Research Report to D6739 Standard Test Method for Silica—pH Value

Research Report to D6845 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area

Research Report to D3492 Standard Specification for Rubber Contraceptives (Male Condoms)

Research Report to D6499 Standard Test Method for The Immunological Measurement of Antigenic Protein in Natural Rubber and its Products

Research Report to D8115 Standard Test Method for Rubber Property—Abrasion Resistance (Multi-Directional Platform Abrader)

Research Report to D4608 Standard Test Method for Citrate in Detergents

Research Report to D6173 Standard Test Method for Determination of Various Anionic Surfactant Actives by Potentiometric Titration

Research Report to D3883 Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics

Research Report to D3775 Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics

Research Report to D3774 Standard Test Method for Width of Textile Fabric

Research Report to D1574 Standard Test Method for Extractable Matter in Wool and Other Animal Fibers

Research Report to D3882 Standard Test Method for Bow and Skew in Woven and Knitted Fabrics

Research Report to D2969 Standard Test Methods for Steel Tire Cords

Research Report to D5362 Standard Test Method for Snagging Resistance of Fabrics (Bean Bag)

Research Report to D6413/D6413M Standard Test Method for Flame Resistance of Textiles (Vertical Test)

Research Report to D5344 Standard Test Method for Extension Force of Partially Oriented Yarn

Research Report to D6476 Standard Test Method for Determining Dynamic Air Permeability of Inflatable Restraint Fabrics

Research Report to D6545 Standard Test Method for Flammability of Textiles Used in Children's Sleepwear

Research Report to D2261 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)

Research Report to D737 Standard Test Method for Air Permeability of Textile Fabrics

Research Report to D1777 Standard Test Method for Thickness of Textile Materials

Research Report to D1388 Standard Test Method for Stiffness of Fabrics

Research Report to D7016/D7016M Standard Test Method to Evaluate Edge Binding Components Used in Mattresses After Exposure to An Open Flame

Research Report to D5587 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure

Research Report to D7142 Standard Test Method for Holding Strength of Prong-Ring Attached Snap Fasteners

Research Report to D7330 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales

Research Report to D1447 Standard Test Method for Length and Length Uniformity of Cotton Fibers by Photoelectric Measurement

Research Report to D6961/D6961M Standard Test Method for Color Measurement of Flax Fiber

Research Report to D7025 Standard Test Method for Assessing Clean Flax Fiber Fineness

Research Report to D7076 Standard Test Method for Measurement of Shives in Retted Flax

Research Report to D7269/D7269M Standard Test Methods for Tensile Testing of Aramid Yarns

Research Report to D7016/D7016M Standard Test Method to Evaluate Edge Binding Components Used in Mattresses After Exposure to An Open Flame

Research Report to D3773/D3773M Standard Test Methods for Length of Woven Fabric

Research Report to D1518 Standard Test Method for Thermal Resistance of Batting Systems Using a Hot Plate

Research Report to D7744/D7744M Standard Test Methods for Tensile Testing of High Performance Polyethylene Tapes

Research Report to D1335 Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings

Research Report to D3936 Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering

Research Report to D5867 Standard Test Methods for Measurement of Physical Properties of Raw Cotton by Cotton Classification Instruments

Research Report to D7811 Standard Test Method for Bow and Skew Using a Measuring Tool

Research Report to D8007 Standard Test Method for Wale and Course Count of Weft Knitted Fabrics

Research Report to D4685/D4685M Standard Test Method for Pile Fabric Abrasion

Research Report to D7812 Standard Test Method for Tensile Testing of Aramid Paper

Research Report to D7984 Standard Test Method for Measurement of Thermal Effusivity of Fabrics Using a Modified Transient Plane Source (MTPS) Instrument

Research Report to D8054/D8054M Standard Test Methods for Tensile Testing of Para-Aramid Flat Yarns

Research Report to D7983 Standard Test Method for Shrinkage of Carpet Backing Fabrics

Research Report to D1683/D1683M Standard Test Method for Failure in Sewn Seams of Woven Fabrics

Research Report to D4499 Standard Test Method for Heat Stability of Hot-Melt Adhesives

Research Report to D6195 Standard Test Methods for Loop Tack

Research Report to D3498 Standard Specification for Adhesives for Field-Gluing Wood Structural Panels (Plywood or Oriented Strand Board) to Wood Based Floor System Framing

Research Report to C557 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing

Research Report to D6004 Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives

Research Report to D3930 Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes

Research Report to D3931 Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading

Research Report to D1875 Standard Test Method for Density of Adhesives in Fluid Form

Research Report to D905 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading

Research Report to D4497 Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)

Research Report to D1002 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)

Research Report to D5828 Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates

Research Report to D6660 Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method

Research Report to D7515 Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)

Research Report to D5827 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography

Research Report to D2809 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants

Research Report to D7637 Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate)

Research Report to D7638 Standard Test Method for Determination of Fatty Acids and Esters in Glycerin

Research Report to D7716 Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography

Research Report to D6130 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy

Research Report to D7736 Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol

Research Report to D3321 Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants

Research Report to D1123 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method

Research Report to D7896 Standard Test Method for Thermal Conductivity, Thermal Diffusivity and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method

Research Report to D7304 Standard Test Method for Determination of Denatonium Ion in Engine Coolant by HPLC

Research Report to D4493 Standard Test Method for Solidification Point of Bisphenol A(4,4′-Isopropylidenediphenol)

Research Report to D6142 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography

Research Report to D6144 Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography

Research Report to D5776 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration

Research Report to D852 Standard Test Method for Solidification Point of Benzene

Research Report to D850 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials

Research Report to D5060 Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography

Research Report to D5135 Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography

Research Report to D3760 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography

Research Report to D7057 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)

Research Report to D6143 Standard Test Method for Iron Content of Bisphenol A (4,4′ - Isopropylidenediphenol)

Research Report to D7183 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence

Research Report to D7504 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number

Research Report to D7536 Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

Research Report to D4735 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography

Research Report to D7011 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection

Research Report to D7504 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number

Research Report to D7184 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection

Research Report to D7266 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)

Research Report to D7871 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)

Research Report to D7883 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Weak Anion Exchange High Performance Liquid Chromatography

Research Report to D7884 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography

Research Report to D7881 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode

Research Report to D7882 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode

Research Report to D2232 Test Method for Evaporation Residue of Naphthalene

Research Report to D2121 Standard Test Methods for Polymer Content of Styrene Monomer

Research Report to D5917 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration

Research Report to D7504 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number

Research Report to D7536 Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

Research Report to D7183 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence

Research Report to D7704 Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration

Research Report to D8130 Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PTA) by Inductively Coupled Plasma Atomic Emission Spectrometric Method

Research Report to D698 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft³ (600 kN-m/m³))

Research Report to D854 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer

Research Report to D1140 Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing

Research Report to D4253 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table

Research Report to D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils

Research Report to D2166/D2166M Standard Test Method for Unconfined Compressive Strength of Cohesive Soil

Research Report to D7458 Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection

Research Report to D5084 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter

Research Report to D4944 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester

Research Report to D7047 Standard Test Method for Swell Volume of Plantago Insularis (Ovata, Psyllium)

Research Report to D7380 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer

Research Report to D6475 Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets

Research Report to D4193 Standard Test Method for Thiocyanate in Water

Research Report to D1068 Standard Test Methods for Iron in Water

Research Report to D1687 Standard Test Methods for Chromium in Water

Research Report to D4382 Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace

Research Report to D858 Standard Test Methods for Manganese in Water

Research Report to D1886 Standard Test Methods for Nickel in Water

Research Report to D2972 Standard Test Methods for Arsenic in Water

Research Report to D3558 Standard Test Methods for Cobalt in Water

Research Report to D3645 Standard Test Methods for Beryllium in Water

Research Report to D1293 Standard Test Methods for pH of Water

Research Report to D3559 Standard Test Methods for Lead in Water

Research Report to D1385 Standard Test Method for Hydrazine in Water

Research Report to D3454 Standard Test Method for Radium-226 in Water

Research Report to D1126 Standard Test Method for Hardness in Water

Research Report to D3082 Standard Test Method for Boron in Water

Research Report to D1068 Standard Test Methods for Iron in Water

Research Report to D5904 Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection

Research Report to D5673 Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry

Research Report to D6071 Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy

Research Report to D3977 Standard Test Methods for Determining Sediment Concentration in Water Samples

Research Report to D5997 Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection

Research Report to D6581 Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography

Research Report to D6508 Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte

Research Report to D6503 Standard Test Method for Enterococci in Water Using Enterolert

Research Report to D6530 Standard Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA)

Research Report to D6239 Standard Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry

Research Report to D6855 Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode

Research Report to D6888 Standard Test Method for Available Cyanides with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection

Research Report to D6239 Standard Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry

Research Report to D7066 Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination

Research Report to D5673 Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry

Research Report to D7315 Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode

Research Report to D7573 Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection

Research Report to D7575 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination

Research Report to D7168 Standard Test Method for ⁹⁹Tc in Water by Solid Phase Extraction Disk

Research Report to D5907 Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water

Research Report to D7598 Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry

Research Report to D7597 Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chromatography/Tandem Mass Spectrometry

Research Report to D7599 Standard Test Method for Determination of Diethanolamine, Triethanolamine, N-Methyldiethanolamine and N-Ethyldiethanolamine in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

Research Report to D7600 Standard Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry

Research Report to D7363 Standard Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monitoring Mode

Research Report to D7284 Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection

Research Report to D7237 Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection

Research Report to D8083 Standard Test Method for Total Nitrogen, and Total Kjeldahl Nitrogen (TKN) by Calculation, in Water by High Temperature Catalytic Combustion and Chemiluminescence Detection

Research Report to D7283 Standard Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting

Research Report to D7678 Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy

Research Report to D8028 Standard Test Method for Measurement of Dissolved Gases Methane, Ethane, Ethylene, and Propane by Static Headspace Sampling and Flame Ionization Detection (GC/FID)

Research Report to D570 Standard Test Method for Water Absorption of Plastics

Research Report to D882 Standard Test Method for Tensile Properties of Thin Plastic Sheeting

Research Report to D882 Standard Test Method for Tensile Properties of Thin Plastic Sheeting

Research Report to D4321 Standard Test Method for Package Yield of Plastic Film

Research Report to D1622/D1622M Standard Test Method for Apparent Density of Rigid Cellular Plastics

Research Report to D4273 Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols

Research Report to D747 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam

Research Report to D1243 Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers

Research Report to D4443 Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography

Research Report to D4475 Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method

Research Report to D732 Standard Test Method for Shear Strength of Plastics by Punch Tool

Research Report to D1505 Standard Test Method for Density of Plastics by the Density-Gradient Technique

Research Report to D1238 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer

Research Report to D638 Standard Test Method for Tensile Properties of Plastics

Research Report to D4350 Standard Test Method for Corrosivity Index of Plastics and Fillers

Research Report to D1894 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting

Research Report to D4603 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer

Research Report to D792 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

Research Report to D635 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position

Research Report to D638 Standard Test Method for Tensile Properties of Plastics

Research Report to D1004 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting

Research Report to D1003 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics

Research Report to D3801 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position

Research Report to D2842 Standard Test Method for Water Absorption of Rigid Cellular Plastics

Research Report to D5017 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance

Research Report to D6042 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)

Research Report to D1525 Standard Test Method for Vicat Softening Temperature of Plastics

Research Report to D6099 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates

Research Report to D1056 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber

Research Report to D1693 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics

Research Report to D1621 Standard Test Method for Compressive Properties of Rigid Cellular Plastics

Research Report to D648 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position

Research Report to D2843 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics

Research Report to D4671 Standard Test Method for Polyurethane Raw Materials: Determination of Unsaturation of Polyols

Research Report to D4672 Standard Test Method for Polyurethane Raw Materials: Determination of Water Content of Polyols

Research Report to D4672 Standard Test Method for Polyurethane Raw Materials: Determination of Water Content of Polyols

Research Report to D1894 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting

Research Report to D4101 Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials

Research Report to D5630 Standard Test Method for Ash Content in Plastics

Research Report to D2863 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

Research Report to D746 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact

Research Report to D2578 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films

Research Report to D2538 Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer

Research Report to D5132 Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles

Research Report to D6979 Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen

Research Report to D7133 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids

Research Report to D7252 Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates

Research Report to D7253 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols

Research Report to D4440 Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology

Research Report to D3418 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry

Research Report to D6247 Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry

Research Report to D7191 Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor

Research Report to D1603 Standard Test Method for Carbon Black Content in Olefin Plastics

Research Report to D4890 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols

Research Report to D1822 Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials

Research Report to D1822 Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials

Research Report to D1929 Standard Test Method for Determining Ignition Temperature of Plastics

Research Report to D6576 Standard Specification for Flexible Cellular Rubber Chemically Blown

Research Report to D3575 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers

Research Report to D7823 Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry

Research Report to D8019 Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength of Fiber Reinforced Polymer Crossarms Assembled with Center Mount Brackets

Research Report to D6150 Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility

Research Report to D8069 Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending

Research Report to D2047 Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine

Research Report to D6494 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction

Research Report to D5836 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method)

Research Report to D6281 Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)

Research Report to D5755 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading

Research Report to D7439 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry

Research Report to D3265 Standard Test Method for Carbon Black—Tint Strength

Research Report to D1937 Standard Test Method for Carbon Black, Pelleted—Mass Strength

Research Report to D1512 Standard Test Methods for Carbon Black—pH Value

Research Report to D3191 Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures

Research Report to D3192 Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber)

Research Report to D3401 Standard Test Methods for Water in Halogenated Organic Solvents and Their Admixtures

Research Report to D2111 Standard Test Methods for Specific Gravity and Density of Halogenated Organic Solvents and Their Admixtures

Research Report to D3444 Standard Test Method for Total Acid Number of Trichlorotrifluoroethane

Research Report to D2106 Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents

Research Report to D2108 Standard Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale)

Research Report to D2989 Standard Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and Their Admixtures

Research Report to D2109 Standard Test Methods for Nonvolatile Matter in Halogenated Organic Solvents and Their Admixtures

Research Report to D6806 Standard Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography

Research Report to D2106 Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents

Research Report to D4059 Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography

Research Report to D4059 Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography

Research Report to D1533 Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration

Research Report to D4059 Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography

Research Report to D924 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids

Research Report to D3612 Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography

Research Report to D7151 Standard Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

Research Report to D6786 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters

Research Report to D2300 Standard Test Method for Gassing of Electrical Insulating Liquids Under Electrical Stress and Ionization (Modified Pirelli Method)

Research Report to D7151 Standard Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

Research Report to D2854 Standard Test Method for Apparent Density of Activated Carbon

Research Report to D3802 Standard Test Method for Ball-Pan Hardness of Activated Carbon

Research Report to D2862 Standard Test Method for Particle Size Distribution of Granular Activated Carbon

Research Report to D5528 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites

Research Report to D3039/D3039M Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials

Research Report to D6484/D6484M Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates

Research Report to D7905/D7905M Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites

Research Report to D6641/D6641M Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture

Research Report to D7291/D7291M Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material

Research Report to D8132/D8132M Standard Test Method for Determination of Prepreg Impregnation by Permeability Measurement

Research Report to D7477 Standard Test Method for Determining the Area Stability of Wet Blue Submersed in Boiling Water

Research Report to D7584 Standard Test Method for Evaluating the Resistance of the Surface of Wet Blue and Wet White to the Growth of Fungi in an Environmental Chamber

Research Report to D7674 Standard Test Method for Hexane/Petroleum Ether Extract in Wet Blue and Wet White

Research Report to D2868 Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather, Wet Blue and Wet White

Research Report to D7816 Standard Test Method for Enumeration of Halophilic and Proteolytic Bacteria in Raceway Brine, Brine-Cured Hides and Skins

Research Report to D7817 Standard Test Method for Enumeration of Yeast and Mold in Raceway Brine, Brine-Cured Hides and Skins

Research Report to D7818 Standard Test Method for Enumeration of Proteolytic Bacteria in Fresh (Uncured) Hides and Skins

Research Report to D7819 Standard Test Method for Enumeration of Yeast and Mold on Fresh (Uncured) Hides and Skins

Research Report to D6657 Standard Test Method for pH of Wet Blue and Wet White

Research Report to D7674 Standard Test Method for Hexane/Petroleum Ether Extract in Wet Blue and Wet White

Research Report to D4179 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers

Research Report to D4512 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder

Research Report to D4365 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst

Research Report to D3906 Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials

Research Report to D4513 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving

Research Report to D4164 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers

Research Report to D4180 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers

Research Report to D4567 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method

Research Report to D6761 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers

Research Report to D7084 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers

Research Report to D4464 Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering

Research Report to D7964/D7964M Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed

Research Report to D5530 Standard Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry

Research Report to D5831 Standard Practice for Screening Fuels in Soils

Research Report to D7203 Standard Practice for Screening Trichloroethylene (TCE)-Contaminated Media Using a Heated Diode Sensor

Research Report to D5744 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell

Research Report to D4491/D4491M Standard Test Methods for Water Permeability of Geotextiles by Permittivity

Research Report to D5885/D5885M Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry

Research Report to D5887/D5887M Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter

Research Report to D5993 Standard Test Method for Measuring Mass per Unit Area of Geosynthetic Clay Liners

Research Report to D4716/D4716M Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head

Research Report to D5199 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics

Research Report to D7056 Standard Test Method for Determining the Tensile Shear Strength of Prefabricated Bituminous Geomembrane Seams

Research Report to D7179 Standard Test Method for Determining Geonet Breaking Force

Research Report to D7466/D7466M Standard Test Method for Measuring Asperity Height of Textured Geomembranes

Research Report to D5994/D5994M Standard Test Method for Measuring Core Thickness of Textured Geomembranes

Research Report to D6817/D6817M Standard Specification for Rigid Cellular Polystyrene Geofoam

Research Report to D6575/D6575M Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)

Research Report to D6525/D6525M Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products

Research Report to D4632/D4632M Standard Test Method for Grab Breaking Load and Elongation of Geotextiles

Research Report to D4533/D4533M Standard Test Method for Trapezoid Tearing Strength of Geotextiles

Research Report to D7005/D7005M Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites

Research Report to E1447 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by Inert Gas Fusion Thermal Conductivity/Infrared Detection Method

Research Report to E1568 Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry

Research Report to E1335 Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis

Research Report to E1335 Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis

Research Report to E1834 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry

Research Report to E1852 Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace Atomic Absorption Spectrometry

Research Report to E1835 Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry

Research Report to E1898 Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry

Research Report to E1917 Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Spectrophotometry

Research Report to E415 Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry

Research Report to E1915 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics

Research Report to E1938 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry

Research Report to E1999 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry

Research Report to E1659 Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet

Research Report to E2050 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion

Research Report to E2209 Standard Test Method for Analysis of High Manganese Steel by Spark Atomic Emission Spectrometry

Research Report to E248 Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry

Research Report to E2209 Standard Test Method for Analysis of High Manganese Steel by Spark Atomic Emission Spectrometry

Research Report to E2242 Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure

Research Report to E1335 Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis

Research Report to E1915 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics

Research Report to E1019 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques

Research Report to E350 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron

Research Report to E1019 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques

Research Report to E350 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron

Research Report to E2465 Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry

Research Report to E539 Standard Test Method for Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry

Research Report to E350 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron

Research Report to E350 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron

Research Report to E350 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron

Research Report to E353 Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys

Research Report to E478 Standard Test Methods for Chemical Analysis of Copper Alloys

Research Report to E350 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron

Research Report to E351 Standard Test Methods for Chemical Analysis of Cast Iron—All Types

Research Report to E1409 Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion

Research Report to E1915 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics

Research Report to E1251 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry

Research Report to E2792 Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion

Research Report to E1834 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry

Research Report to E572 Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry

Research Report to E1915 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics

Research Report to E2371 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)

Research Report to E1600 Standard Test Methods for Determination of Gold in Cyanide Solutions

Research Report to E415 Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry

Research Report to E3061 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance Based Method)

Research Report to E384 Standard Test Method for Microindentation Hardness of Materials

Research Report to E384 Standard Test Method for Microindentation Hardness of Materials

Research Report to E2627 Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials

Research Report to E84 Standard Test Method for Surface Burning Characteristics of Building Materials

Research Report to E662 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials

Research Report to E1354 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter

Research Report to E1352 Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies

Research Report to E1590 Standard Test Method for Fire Testing of Mattresses

Research Report to E970 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source

Research Report to E2649 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy

Research Report to E2269 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography

Research Report to E2141 Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units

Research Report to E1680 Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems

Research Report to E399 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials

Research Report to E399 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials

Research Report to E399 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials

Research Report to E1921 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range

Research Report to E2714 Standard Test Method for Creep-Fatigue Testing

Research Report to E2948 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire

Research Report to E1921 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range

Research Report to E2948 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire

Research Report to E3039 Standard Test Method for Determination of Crack-Tip-Opening Angle of Pipe Steels Using DWTT Specimens

Research Report to E3063 Test Method for Antimony Content Using Neutron Activation Analysis (NAA)

Research Report to E2073 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings

Research Report to E1349 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry

Research Report to E991 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method

Research Report to E2073 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings

Research Report to E2177 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness

Research Report to E1710 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer

Research Report to E430 Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry

Research Report to E2832 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)

Research Report to D4449 Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance

Research Report to E291 Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)

Research Report to E203 Standard Test Method for Water Using Volumetric Karl Fischer Titration

Research Report to E475 Standard Test Method for Assay of Di-tert-Butyl Peroxide Using Gas Chromatography

Research Report to E1786 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry

Research Report to E224 Standard Test Methods for Analysis of Hydrochloric Acid

Research Report to E223 Standard Test Methods for Analysis of Sulfuric Acid

Research Report to E1899 Standard Test Method for Hydroxyl Groups Using Reaction with p-Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide

Research Report to E538 Standard Test Methods for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)

Research Report to E534 Standard Test Methods for Chemical Analysis of Sodium Chloride

Research Report to E2037 Standard Test Method for Bromine Chloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)

Research Report to E2036 Standard Test Method for Nitrogen Trichloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)

Research Report to E1787 Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography

Research Report to E1064 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration

Research Report to E2409 Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol and in Mono- and Dipropylene Glycol(Gas Chromatographic Method)

Research Report to E1615 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method

Research Report to E2313 Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry)

Research Report to E2193 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)

Research Report to E2469 Standard Test Method for Chloride in Mono-, Di- and Tri-ethylene Glycol by Ion Chromatography

Research Report to E2664 Standard Test Method for Methanol Wall Wash of Marine Vessels Handling Polyester Grade Monoethylene Glycol

Research Report to E2679 Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol byNon-Aqueous Potentiometric Titration

Research Report to E2820 Standard Test Method for Evaluating Thermal EMF Properties of Base-Metal Thermocouple Connectors

Research Report to E698 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method

Research Report to E537 Standard Test Method for The Thermal Stability of Chemicals by Differential Scanning Calorimetry

Research Report to E2046 Standard Test Method for Reaction Induction Time by Thermal Analysis

Research Report to E487 Standard Test Method for Constant-Temperature Stability of Chemical Materials

Research Report to E2931 Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds

Research Report to E74 Standard Practices for Calibration and Verification for Force-Measuring Instruments

Research Report to E23 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

Research Report to E21 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials

Research Report to E517 Standard Test Method for Plastic Strain Ratio r for Sheet Metal

Research Report to E18 Standard Test Methods for Rockwell Hardness of Metallic Materials

Research Report to E18 Standard Test Methods for Rockwell Hardness of Metallic Materials

Research Report to E10 Standard Test Method for Brinell Hardness of Metallic Materials

Research Report to E2546 Standard Practice for Instrumented Indentation Testing

Research Report to E2448 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials

Research Report to E646 Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials

Research Report to E8/E8M Standard Test Methods for Tension Testing of Metallic Materials

Research Report to E2448 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials

Research Report to E1875 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance

Research Report to E1875 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance

Research Report to E855 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading

Research Report to E292 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials

Research Report to E2298 Standard Test Method for Instrumented Impact Testing of Metallic Materials

Research Report to E2298 Standard Test Method for Instrumented Impact Testing of Metallic Materials

Research Report to E2248 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens

Research Report to E2298 Standard Test Method for Instrumented Impact Testing of Metallic Materials

Research Report to E2248 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens

Research Report to E2298 Standard Test Method for Instrumented Impact Testing of Metallic Materials

Research Report to E643 Standard Test Method for Ball Punch Deformation of Metallic Sheet Material

Research Report to E9 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature

Research Report to E110 Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers

Research Report to E2546 Standard Practice for Instrumented Indentation Testing

Research Report to E1450 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium

Research Report to E2427 Standard Test Method for Acceptance by Performance Testing for Sieves

Research Report to E1289 Standard Specification for Reference Specimen for Sound Transmission Loss

Research Report to E1574 Standard Test Method for Measurement of Sound in Residential Spaces

Research Report to C423 Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method

Research Report to C423 Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method

Research Report to E1050 Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones and a Digital Frequency Analysis System

Research Report to E1414/E1414M Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum

Research Report to E2694 Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids

Research Report to E2694 Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids

Research Report to E2686 Standard Test Method for Volatile Organic Compound (VOC) Solvents Absorbed/Adsorbed By Simulated Soil Impacted by Pesticide Emulsifiable Concentrate (EC) Applications

Research Report to E2274 Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants

Research Report to E2406 Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations

Research Report to E2783 Standard Test Method for Assessment of Antimicrobial Activity for Water Miscible Compounds Using a Time-Kill Procedure

Research Report to E2799 Standard Test Method for Testing Disinfectant Efficacy against Pseudomonas aeruginosa Biofilm using the MBEC Assay

Research Report to E2871 Standard Test Method for Evaluating Disinfectant Efficacy Against Pseudomonas aeruginosa Biofilm Grown in CDC Biofilm Reactor Using Single Tube Method

Research Report to E2945 Standard Test Method for Film Permeability Determination Using Static Permeability Cells

Research Report to E3031 Standard Test Method for Determination of Antibacterial Activity on Ceramic Surfaces

Research Report to E1131 Standard Test Method for Compositional Analysis by Thermogravimetry

Research Report to E1582 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers

Research Report to E1858 Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry

Research Report to E1860 Standard Test Method for Elapsed Time Calibration of Thermal Analyzers

Research Report to E1641 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method

Research Report to E1719 Standard Test Method for Vapor Pressure of Liquids by Ebulliometry

Research Report to E1952 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry

Research Report to E2009 Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry

Research Report to E2041 Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method

Research Report to E2070 Standard Test Methods for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods

Research Report to E2160 Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry

Research Report to E2008 Standard Test Methods for Volatility Rate by Thermogravimetry

Research Report to E2092 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis

Research Report to E2347 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis

Research Report to E2206 Standard Test Method for Force Calibration of Thermomechanical Analyzers

Research Report to E2403 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry

Research Report to E1824 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method

Research Report to E2584 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter

Research Report to E1868 Standard Test Methods for Loss-On-Drying by Thermogravimetry

Research Report to E2550 Standard Test Method for Thermal Stability by Thermogravimetry

Research Report to E2551 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers

Research Report to E1461 Standard Test Method for Thermal Diffusivity by the Flash Method

Research Report to E2890 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger Method

Research Report to E2603 Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters

Research Report to E2675 Standard Practice for Property Management System Outcomes

Research Report to E2677 Standard Test Method for Determining Limits of Detection in Explosive Trace Detectors

Research Report to E3068 Standard Test Method for Contact Measurement of Backface Deformation in Clay Backing During Body Armor Testing

Research Report to E2490 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)

Research Report to F1593 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer

Research Report to F996 Standard Test Method for Separating an Ionizing Radiation-Induced MOSFET Threshold Voltage Shift Into Components Due to Oxide Trapped Holes and Interface States Using the Subthreshold Current–Voltage Characteristics

Research Report to F76 Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors

Research Report to F2360 Standard Test Method for Determining Luminance of a Membrane Switch Backlit with Diffuse Light Source

Research Report to F904 Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials

Research Report to F1927 Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector

Research Report to F1886/F1886M Standard Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection

Research Report to F2054/F2054M Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates

Research Report to F2013 Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector

Research Report to F2095 Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates

Research Report to F2203 Standard Test Method for Linear Measurement Using Precision Steel Rule

Research Report to F2251 Standard Test Method for Thickness Measurement of Flexible Packaging Material

Research Report to F2338 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method

Research Report to F2338 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method

Research Report to D3985 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor

Research Report to D3985 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor

Research Report to F88/F88M Standard Test Method for Seal Strength of Flexible Barrier Materials

Research Report to F2622 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors

Research Report to F2714 Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay

Research Report to F2338 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method

Research Report to F2824 Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids

Research Report to D3078 Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission

Research Report to F2638 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier

Research Report to F1929 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration

Research Report to F3004 Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound

Research Report to F3039 Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration

Research Report to F2476 Standard Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (CO₂TR) Through Barrier Materials Using An Infrared Detector

Research Report to F1249 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor

Research Report to E398 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement

Research Report to F2981 Standard Test Method for Verifying Nonporous Flexible Barrier Material Resistance to the Passage of Air

Research Report to F3136 Standard Test Method for Oxygen Gas Transmission Rate through Plastic Film and Sheeting using a Dynamic Accumulation Method

Research Report to F3039 Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration

Research Report to F38 Standard Test Methods for Creep Relaxation of a Gasket Material

Research Report to F1087 Standard Test Method for Linear Dimensional Stability of a Gasket Material to Moisture

Research Report to F146 Standard Test Methods for Fluid Resistance of Gasket Materials

Research Report to F2523 Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers

Research Report to F2466 Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications

Research Report to F2837 Standard Test Method for Hot Compression Properties of Gasket Materials

Research Report to F1921/F1921M Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs

Research Report to F2004 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis

Research Report to F2082/F2082M Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery

Research Report to F2516 Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials

Research Report to F2129 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices

Research Report to F1717 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model

Research Report to F1717 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model

Research Report to F2077 Test Methods For Intervertebral Body Fusion Devices

Research Report to F3212 Standard Test Method for Coring Testing of Huber Needles

Research Report to F1514 Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change

Research Report to F970 Standard Test Method for Measuring Recovery Properties of Floor Coverings after Static Loading

Research Report to F410 Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement

Research Report to F2199 Standard Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure to Heat

Research Report to F137 Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus

Research Report to F386 Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces

Research Report to F387 Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer

Research Report to F2170 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes

Research Report to F801 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts

Research Report to F1165 Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts

Research Report to F1863 Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmissivity of Transparent Parts

Research Report to F1863 Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmissivity of Transparent Parts

Research Report to F2156 Standard Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope

Research Report to F548 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics

Research Report to F428 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures

Research Report to F1252 Standard Test Method for Measuring Optical Reflectivity of Transparent Materials

Research Report to F1702 Standard Test Method for Measuring Impact-Attenuation Characteristics of Natural Playing Surface Systems Using a Lightweight Portable Apparatus

Research Report to F1720 Standard Test Method for Measuring Thermal Insulation of Sleeping Bags Using a Heated Manikin

Research Report to F1647 Standard Test Methods for Organic Matter Content of Athletic Field Rootzone Mixes

Research Report to F1446 Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear

Research Report to F2157 Standard Specification for Synthetic Surfaced Running Tracks

Research Report to F1888 Standard Test Method for Compression-Displacement of Baseballs and Softballs

Research Report to F2845 Standard Test Method for Measuring the Dynamic Stiffness (DS) and Cylindrical Coefficient of Restitution (CCOR) of Baseballs and Softballs

Research Report to F3022 Standard Test Method for Evaluating the Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments

Research Report to F1887 Standard Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs

Research Report to F3022 Standard Test Method for Evaluating the Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments

Research Report to F2779 Standard Practice for Commercial Radial Truck-Bus Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Roadwheel and a Flat Surface

Research Report to F608 Standard Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners

Research Report to F1334 Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners

Research Report to F558 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners

Research Report to F608 Standard Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners

Research Report to F608 Standard Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners

Research Report to F2105 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems

Research Report to F888 Standard Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner

Research Report to F2544 Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units

Research Report to F2607 Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners

Research Report to F2609 Standard Test Method for Litter-Cleaning Effectiveness of Vacuum Cleaners

Research Report to F2828 Standard Test Method for Assessing Carpet Cleaning Effectiveness in Terms of Visual Appearance Change When Cleaned with a Wet Extraction Cleaning System

Research Report to F2826 Standard Test Method for Evaluating the Sustained Air Performance and Exhaust Emission Efficiencies of Central Vacuum Cleaning Units

Research Report to F2608 Standard Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process

Research Report to F1940 Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners

Research Report to D1598 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure

Research Report to D1599 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings

Research Report to F1473 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins

Research Report to F2136 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe

Research Report to F2135 Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings

Research Report to F2231 Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes

Research Report to F2263 Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water

Research Report to F2634 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method

Research Report to D2412 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading

Research Report to F2634 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method

Research Report to F1802 Standard Test Method for Performance Testing of Excess Flow Valves

Research Report to F3203 Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing

Research Report to F955 Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances

Research Report to F1670/F1670M Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood

Research Report to F1819 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique

Research Report to F1868 Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate

Research Report to F739 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact

Research Report to F2894 Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven

Research Report to F1930 Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin

Research Report to F2961 Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter

Research Report to F3030 Standard Test Method for Snowboards with a Channel-Mounting System and Removable Inserts

Research Report to F2617 Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry

Research Report to F2980 Standard Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF)

Research Report to F3139 Standard Test Method for Analysis of Tin-Based Solder Alloys for Minor and Trace Elements Using Inductively Coupled Plasma Atomic Emission Spectrometry

Research Report to F3078 Standard Test Method for Identification and Quantification of Lead in Paint and Similar Coating Materials using Energy Dispersive X-ray Fluorescence Spectrometry (EDXRF)

Research Report to F2617 Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry

Research Report to G150 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels and Related Alloys

Research Report to G180 Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries

Research Report to G187 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method

Research Report to G200 Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil

Research Report to G69 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys

Research Report to G202 Standard Test Method for Using Atmospheric Pressure Rotating Cage

Research Report to G5 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements

Research Report to C876 Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete

Research Report to G99 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus

Research Report to G133 Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear

Research Report to G164 Standard Test Method for Determination of Surface Lubrication on Flexible Webs

Research Report to G171 Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus

Research Report to G181 Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions

Research Report to G211 Standard Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets

Research Report to G204 Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions

Research Report to G98 Standard Test Method for Galling Resistance of Materials

Research Report to G72/G72M Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment

Research Report to G122 Standard Test Method for Evaluating the Effectiveness of Cleaning Agents

Research Report to G74 Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact