Bookmark and Share

Standardization News Search
November 2003 Approved Standards Actions
A Committees B Committees C Committees D Committees
E Committees F Committees G Committees
D01 on Paint and Related Coatings, Materials, and Applications

NEW STANDARD
Volume 06.01, 2004
D 6899-03, Guide for Laboratory Cyclic Corrosion Testing of Automotive Painted Steel
Volume 06.01, 2004
D 6902-03, Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings
Volume 06.02, 2004
D 6944-03, Test Method for Resistance of Cured Coatings to Thermal Cycling
Volume 06.03, 2004
D 6942-03, Test Method for Stability of Cellulose Fibers in Alkaline Environments

REVISION OF STANDARD
Volume 06.01, 2004
D 16-03, Terminology for Paint, Related Coatings, Materials, and Applications
D 1653-03, Test Methods for Water Vapor Transmission of Organic Coating Films
Volume 06.02, 2004
D 6237-03, Guide for Painting Inspectors (Concrete and Masonry Substrates)
Volume 06.02, 2004
D 3170-03, Test Method for Chipping Resistance of Coatings
D 5107-03, Practice for Preparatory Surface Cleaning of Architectural Sandstone

D02 on Petroleum Products and Lubricants

NEW STANDARD
Volume 05.04, 2004
D 6892-03, Test Method for Pour Point of Petroleum Products Robotic Tilt Method
D 6894-03, Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
D 6923-03, Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure
Volume 05.05, 2004
D 6890-03, Test Method for Determination of Ignition Delay and Derived Cetane Number DCN of Diesel Fuel Oils by Combustion in a Constant Volume Chamber

REVISION OF STANDARD
Volume 05.01, 2004
D 86-03, Test Method for Distillation of Petroleum Products at Atmospheric Pressure
D 381-03, Test Method for Gum Content in Fuels by Jet Evaporation
D 910-03, Specification for Aviation Gasolines
D 1160-03, Test Method for Distillation of Petroleum Products at Reduced Pressure
D 1655-03, Specification for Aviation Turbine Fuels
D 2783-03, Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids Four-Ball Method
D 2893-03, Test Methods for Oxidation Characteristics of Extreme-Pressure Lubrication Oils
D 2983-03, Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
Volume 05.02, 2004
D 3699-03, Specification for Kerosine
D 4485-03, Specification for Performance of Engine Oils
D 4737-03, Test Method for Calculated Cetane Index by Four Variable Equation
D 4806-03, Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
D 4814-03, Specification for Automotive Spark-Ignition Engine Fuel
D 5236-03, Test Method for Distillation of Heavy Hydrocarbon Mixtures Vacuum Potstill Method
Volume 05.03, 2004
D 5453-03, Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Motor Oils by Ultraviolet Fluorescence
D 5771-03, Test Method for Cloud Point of Petroleum Products Optical Detection Stepped Cooling Method
D 5772-03, Test Method for Cloud Point of Petroleum Products Linear Cooling Rate Method
D 5773-03, Test Method for Cloud Point of Petroleum Products Constant Cooling Rate Method
D 6201-03, Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
D 6300-03, Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
Volume 05.04, 2004
D 6824-03, Test Method for Determining Filterability of Aviation Turbine Fuel
Volume 05.05, 2004
D 613-03b, Test Method for Cetane Number of Diesel
Fuel Oil
D 2699-03, Test Method for Research Octane Number of Spark-ignition Engine Fuel
D 2699-03a, Test Method for Research Octane Number of Spark-Ignition Engine Fuel
D 2700-03, Test Method for Motor Octane Number of
Spark-Ignition Engine Fuel
D 2700-03a, Test Method for Motor Octane Number of
Spark-Ignition Engine Fuel
D 6890-03a, Test Method for Determination of Ignition Delay and Derived Cetane Number DCN of Diesel Fuel Oils by Combustion in a Constant Volume Chamber

EDITORIAL CHANGE
Volume 05.03, 2004
D 5441-98 (2003)e1, Test Method for Analysis of Methyl Tert-Butyl Ether MTBE by Gas Chromatography
D 5442-93 (2003)e1, Test Method for Analysis of Petroleum Waxes by Gas Chromatography
D 6186-98 (2003)e1, Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry PDSC
D 6217-98 (2003)e1, Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
D 6293-98 (2003)e1, Test Method for Oxygenates and Paraffin, Olefin, Naphthene, Aromatic
D 6296-98 (2003)e1, Test Method for Total Olefins in Spark-Ignition Engine Fuels by Multidimensional Gas Chromatography
D 6334-98 (2003)e1, Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence

REAPPROVAL OF STANDARD
Volume 05.01, 2004
D 2068-97 (2003)
Volume 05.02, 2004
D 3233-93 (2003)
Volume 05.04, 2004
D 4054-93 (2003)
D 5600-98 (2003)

D03 on Gaseous Fuels

REVISION OF STANDARD
Volume 05.06, 2000
D 4150-03, Terminology Relating to Gaseous Fuels

D05 on Coal and Coke

REVISION OF STANDARD
Volume 05.06, 2000
D 2234-03, Practice for Collection of a Gross Sample of Coal

D06 on Paper and Paper Products

REAPPROVAL OF STANDARD
Volume 15.09, 2004
D 5663-97 (2003)

WITHDRAWAL OF STANDARD
Volume 15.09, 2004
D 4432-98, Guide for Purchasing Papers Used in Continuous Computer Forms
D 6149-97, Specification for Newsprint Including Newsprint Manufactured from Recycled Fiber

D07 on Wood

REVISION OF STANDARD
Volume 04.10, 2004
D 3737-03, Practice for Establishing Allowable Properties for Structural Glued Laminated Timber Glulam

D08 on Roofing and Waterproofing

REVISION OF STANDARD
Volume 04.04, 2004
D 228-03, Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
D 449-03, Specification for Asphalt Used in Dampproofing and Waterproofing
D 3161-03b, Test Method for Wind-Resistance of Asphalt Shingles Fan-induced Method
D 4637-03, Specification for EPDM Sheet Used in Single-Ply Roof Membrane

REAPPROVAL OF STANDARD
Volume 04.04, 2004
D 3805-97 (2003)
E 102-93 (2003)

D10 on Packaging

REVISION OF STANDARD
Volume 15.09, 2004
D 4919-03, Guide for Testing of Hazardous Materials Packagings
D 5445-03a, Practice for Pictorial Markings for Handling of Goods Volume 15.09, 2004
D 5445-03, Practice for Pictorial Markings for Handling of Goods

REAPPROVAL OF STANDARD
Volume 15.09, 2004
D 1974-98 (2003)
D 3611-89 (2003)
D 3816/D 3816M-96 (2003)
D 4279-95 (2003)
D 5112-98 (2003)

D11 on Rubber

REVISION OF STANDARD
Volume 09.01, 2003
D 395-03, Test Methods for Rubber Property — Compression Set
D 1566-03a, Terminology Relating to Rubber
D13 on Textiles

REVISION OF STANDARD
Volume 07.02, 2000
D 6477-03, Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics

REAPPROVAL OF STANDARD
Volume 07.01, 2000
D 1336-97 (2003)
Volume 07.02, 2000
D 2724-87 (2003)
D 4851-97 (2003)
D 4920-98 (2003)
D 5035-95 (2003)
D 5238-98 (2003)
D 5587-96 (2003)
D 6207-97 (2003)

WITHDRAWAL OF STANDARD
Volume 07.02, 2003
D 4372-93, Specification for Flame-resistant Materials Used in Camping Tentage
D 4522-86(1993), Performance Specification for Feather-Filled and Down-filled Products
D 4523-85(1993), Terminology Relating to Feather-filled and Down Filled Products
w reinstatement of standard
Volume 07.01, 2003
D 3107-03 (Includes change to title), Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns

D14 on Adhesives

REVISION OF STANDARD
Volume 15.06, 2004
D 1875-03, Test Method for Density of Adhesives in Fluid Form
Volume 15.06, 2004
D 3762-03, Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test)
D 6464-03a, Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing

D16 on Aromatic Hydrocarbons and Related Chemicals

REVISION OF STANDARD
Volume 06.04, 2004
D 2119-03, Test Method for Aldehydes in Styrene Monomer
D 5808-03, Test Method for Determining Organic Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry

D18 on Soil and Rock

NEW STANDARD
Volume 04.08, 2003
D 2944-03, Test Method of Sampling Processed Peat Materials

REVISION OF STANDARD
Volume 04.08, 2003
D 4612-03, Practice for Calculating Thermal Diffusivity of Rocks
D 5030-00, Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit

REAPPROVAL OF STANDARD
Volume 04.08, 2003
D 5518-94 (2000)
D 5521-94 (2000)
D 5549-94 (2000)
Volume 04.09, 2003
D 6092-97 (2003)
D 6151-97 (2003)

REINSTATEMENT OF STANDARD
Volume 04.08, 2004
D 3385-03, Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
D 5298-03, Test Method for Measurement of Soil Potential Suction Using Filter Paper
Volume 04.09, 2002
D 5856, Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-wall, Compaction-Mold Permeameter

D19 on Water

REVISION OF STANDARD
Volume 11.01, 2003
D 1129-03a, Terminology Relating to Water
D 4410-03, Terminology for Fluvial Sediment
Volume 11.01, 2004
D 1429-03, Test Methods for Specific Gravity of Water and Brine
D 4190-03, Test Method for Elements in Water by Direct-current Plasma Atomic Emission Spectroscopy
D 6301-03, Practice for the Collection of Samples of Filterable and Nonfilterable Matter in Water
Volume 11.02, 2003
D 3263-03, Test Methods for Corrosivity of Solvent Systems for Removing Water-Formed Deposits
D 6239-03, Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry
Volume 11.02, 2004
D 3875-03, Test Method for Alkalinity in Brackish Water, Seawater, and Brines

EDITORIAL CHANGE
Volume 11.02, 2003
D 3352-03e1, Test Method for Strontium Ion in Brackish Water, Seawater, and Brines

REAPPROVAL OF STANDARD
Volume 11.02, 2003
D 1141-98 (2003)
D 4472-89 (2003)
D 4822-88 (2003)
D 4993-89 (2003)
D 5074-90 (2003)
D 5613-94 (2003)
D 5614-94 (2003)
D 5640-95 (2003)
D 5674-95 (2003)
D 6104-97 (2003)
D 6157-97 (2003)

WITHDRAWAL OF STANDARD
Volume 11.01, 2004
D 1192-98, Guide for Equipment for Sampling Water and Steam in Closed Conduits
Volume 11.02, 2004
D 2907-97, Test Methods for Microquantities of Uranium in Water by Fluorometry

D20 on Plastics

NEW STANDARD
Volume 08.03, 2003
D 6953-03, Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography LC
Volume 08.03, 2004
D 6867-03, Specification for Perfluoroalkoxy PFA-Fluoropolymer Tubing
D 6869-03, Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine in Water)

REVISION OF STANDARD
Volume 08.01, 2003
D 635-03, Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
D 1746-03, Test Method for Transparency of Plastic Sheeting
Volume 08.02, 2003
D 3574-03, Test Methods for Flexible Cellular Materials —Slab, Bonded, and Molded Urethane Foams
Volume 08.02, 2004
D 4225-03, Specification for Styrene-Butadiene Sheeting
Volume 08.03, 2003
D 4473-03, Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior
D 4703-03, Practice for Compression Molding Thermoplastic Materials Into Test Specimens, Plaques, or Sheets
D 4804-03, Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
D 5207-03, Practice for Confirmation of 20–mm 50–w and 125–mm 500—w Test Flames for Small-Scale Burning Tests on Plastic Materials
D 5989-03, Specification for Extruded and Monomer Cast Shapes Made from Nylon PA
D 6100-03, Specification for Extruded, Compression Molded and Injection Molded Acetal Shapes Pom
Volume 08.03, 2004
D 4883-03, Test Method for Density of Polyethylene by the Ultrasound Technique
Volume 08.04, 2003
C 581-03, Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
D 3754-03, Specification for “Fiberglass” Glass-Fiber-Reinforced Thermosetting-Resin Sewer and Industrial Pressure Pipe
D 4756-03, Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC Siding) and Soffit
D 6783-03, Specification for Polymer Concrete Pipe
Volume 08.04, 2004
D 3679-03, Specification for Rigid Poly(Vinyl Chloride) (PVC Siding)

REAPPROVAL OF STANDARD
Volume 08.01, 2003
D 787-96 (2003)
D 1203-94 (2003)
D 2115-92 (2003)
Volume 08.03, 2003
D 6265-98 (2003)
D 6288-98 (2003)

WITHDRAWAL OF STANDARD
Volume 08.01, 2003
D 2151-95(2000), Practice for Staining of Poly(Vinyl Chloride) Compositions by Rubber Compounding Ingredients

D24 on Carbon Black

REVISION OF STANDARD
Volume 09.01, 2003
D 1937-03, Test Method for Carbon Black, Pelleted — Mass Strength
D 6602-03a, Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
Volume 09.01, 2004
D 3493-03 (Includes change to title), Test Method for Carbon Black — Oil Absorption Number of Compressed Sample Coan
D 6556-03, Test Method for Carbon Black —Total and External Surface Area by Nitrogen Adsorption

D27 on Electrical Insulating Liquids and Gases

NEW STANDARD
Volume 10.03, 2004
D 6871-03, Specification for Natural Vegetable Oil Ester Fluids Used in Electrical Apparatus

D30 on Composite Materials

REVISION OF STANDARD
Volume 15.03, 2004
D 3410/D 3410M-03, Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading

D34 on Waste Management

REVISION OF STANDARD
Volume 11.04, 2004
D 4547-03, Guide for Sampling Waste and Soils for Volatile Organic Compounds
D 5831-03, Test Method for Screening Fuels in Soils

REAPPROVAL OF STANDARD
Volume 11.04, 2004
D 4503-86 (2003)
D 4979-95 (2003)
D 5013-89 (2003)
D 5231-92 (2003)
D 5358-93 (2003)
D 5369-93 (2003)
D 5530-94 (2003)
D 6233-98 (2003)
D 6250-98 (2003)
D 6311-98 (2003)
D 6323-98 (2003)

D35 on Geosynthetics

NEW STANDARD
Volume 04.13, 2004
D 6917-03, Guide for Selection of Test Methods for Prefabricated Vertical Drains PVD
D 6918-03, Test Method for Testing Vertical Strip Drains in the Crimped Condition

REVISION OF STANDARD
Volume 04.13, 2003
D 4716-02, Test Method for Determining the In-Plane Flow Rate Per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
D 6496-03, Test Method for Determining Average Bonding Peel Strength Between the Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners
Volume 04.13, 2004
D 5596-03, Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics

REAPPROVAL OF STANDARD
Volume 04.13, 2003
D 4594-96 (2003)
D 4632-91 (2003)
D 4884-96 (2003)
D 5322-98 (2003)
D 5496-98 (2003)
D 5889-97 (2003)
D 6213-97 (2003)

Click here for ASTM Business Link