Bookmark and Share
All standards actions listed below have been approved by ballot and the Committee on Standards.

The new, revised, reapproved with editorial change, and other standards that include editorial changes are now available for sale or will be available within four weeks.

Standards are published in the Annual Book of ASTM Standards (the volume and year are listed with all actions). Each standard is also available as a separate reprint. ASTM standards under five pages cost $25 (members deduct 10%) for North American customers. Lengthier standards are priced higher. Contact ASTM with a purchase order, letter, phone call (610/832-9585); fax (610/832-9555); or e-mail (

For immediate access, visit and choose from the following options:

Subscribe to online downloads via ASTM Standards Source™ and choose a subscription of 50, 200, or unlimited standards. For details, visit

Download standards via WebDoxx and view and print them locally or request a fax copy using WebFaxx. Locate your standards within the Store area of the Web site at the
Search for Individual Standards link.
Standardization News Search

February 2002 Approved Standards Actions
A Committees B Committees C Committees D Committees
E Committees F Committees
A01 on Steel, Stainless Steel and Related Alloys

Volume 01.03, 2001
A 751-01, Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
Volume 01.04, 2001
A 615/A 615M-01b, Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
A 633/A 633M-01, Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
Volume 01.05, 2001
A 388/A 388M-01, Practice for Ultrasonic Examination of Heavy Steel Forgings
A 391/A 391M-01, Specification for Grade 80 Alloy Steel Chain
A 413/A 413M-01, Specification for Carbon Steel Chain
A 466/A 466M-01, Specification for Weldless Chain
A 467/A 467M-01, Specification for Machine and Coil Chain
A 579-01, Specification for Superstrength Alloy Steel Forgings
A 973-01, Specification for Grade 100 Alloy Steel Chain
A 982-01, Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
A 983-01, Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
A 986-01, Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
Volume 01.01, 2003
A 234/A 234M-01, Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
A 437/A 437M-01a, Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service
A 500-01a, Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
A 522/A 522M-01, Specification for Forged or Rolled 8 and 9 Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
A 688/A 688M-01a, Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
A 789/A 789M-01a, Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
A 815/A 815M-01a, Specification for Wrought Ferritic, Ferritic/ Austenitic, and Martensitic Stainless Steel Piping Fittings
A 941-01, Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
A 962/A 962M-01a, Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range
Volume 01.02, 2003
A 781/A 781M-01, Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
Volume 01.02, 2003
A 703/A 703M-01a, Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

A04 on Iron Castings

Volume 01.02, 2003
A 436-86 (2001)

Volume 01.02, 2003
A 571M-84(1997), Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service (Metric)

A05 on Metallic-Coated Iron and Steel Products

Volume 01.06, 2003
A 123/A 123M-01a, Specification for Zinc Hot-Dip Galvanized Coatings on Iron and Steel Products
A 143-01, Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
A 153-01a, Specification for Zinc Coating Hot-Dip on Iron and Steel Hardware
A 385-01, Practice for Providing High-Quality Zinc Coatings Hot-Dip
A 463/A 463M-01a, Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
A 653/A 653M-01a, Specification for Steel Sheet, Zinc-Coated Galvanized or Zinc-Iron Alloy-Coated Galvannealed by the Hot-Dip Process
A 755/A 755M-01, Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
A 760/A 760M-01a, Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
A 792/A 792M-01a, Specification for Steel Sheet, 55 Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
A 875/A 875M-01a, Specification for Steel Sheet, Zinc-5 Aluminum Alloy-Coated by the Hot-Dip Process
A 902-01, Terminology Relating to Metallic Coated Steel Products
A 1003-01, Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members

A06 on Magnetic Properties

Volume 03.04, 2002
A 34/A 34M-01, Practice for Sampling and Procurement Testing of Magnetic Materials

Copyright 2002, ASTM

Back to Contents