Registration:Pre-register for Committee(s) Meeting(s) - There is no fee to attend an ASTM Meeting but registration is required (note: meeting registration only, contact hotel for accommodations).
Technical Meeting Preparation:Register for Symposium/Workshop
Additional Member Resources:Review Online Training Modules offered prior to the meeting, these can be found on the ASTM Website at this link: www.astm.org/MEMBER_TRAINING
Suggestions:Invite a colleague to attend the meeting
To view your committee schedule, use the convenient link on this meeting page. Approximately two weeks prior to the meeting, meeting room names will be added to the schedule.
You must be registered to attend ASTM Meetings. Use our online registration form where you have the ability to register for multiple events, pay fees in advance using a credit card, and receive an electronic confirmation. You may register online at the "Register" link above.
When you preregister online, you will receive emails on committee meetings, final announcements, and other information that will help you prepare for your meeting. The registration information significantly assists us in preparations for the committee week.
The cut-off for preregistration is Wednesday, October 31, 2018. After this date, please register on-site at the ASTM Registration Desk at the Washington Hilton.
All committee meetings will be held at the Washington Hilton, 1919 Connecticut Ave., NW, Washington, DC, 20009.
Hotel Reservations: Staying at our contracted hotel is important to ASTM, to the hotel where we are holding this meeting, and ultimately to you as an ASTM member. When you reserve a guest room at another hotel and an ASTM contracted room goes unsold, ASTM is liable and must pay a non-performance penalty fee to the hotel. Please support ASTM by reserving your sleeping room at our official hotel. Reservations may be made via the hotel's online reservation system at Washington Hilton. One night's room and tax deposit is required to confirm a reservation.
The discounted rate will be honored until the ASTM block is full, but no later than October 1st, 2018. ASTM rates are $187 plus tax. You may be charged a higher rate if reservations are received after the cut-off date, or when the block is full. The hotel requires a credit card to guarantee your reservation, once submitted a confirmation number will be provided electronically.
OVERFLOW HOTEL INFORMATION:
Churchill Hotel, 1914 Connecticut Ave NW, Washington, DC 20009. Rooms available November 3-8, 2018. Reservations may be made via the hotel's online reservation system at Churchill Hotel.
The discounted rate will be honored until the ASTM block is full, but no later than October 12th, 2018. ASTM rates are $159 plus tax. You may be charged a higher rate if reservations are received after the cut-off date, or when the block is full. The hotel requires a credit card to guarantee your reservation, once submitted a confirmation number will be provided electronically.
The Washington Hilton has a limited number of rooms at the government per diem rate. Reservations may be made via the hotel's online reservation system at Washington Hilton Government Reservations. You must present your ID at the front desk upon check-in.
IMPORTANT! ASTM Rates are non-commissionable. If you book your reservation through a travel agent, they must ask for a non-commissioned ASTM Group Rate. ASTM cannot adjust your higher rate if commissions were paid to a travel agency.
INTERNET: The Washington Hilton offers a complimentary basic wireless connection in the guest rooms with the ASTM group rate.
CANCELLATION/CHANGE POLICY: At the Washington Hilton, notice of cancellation must be received 72 hours prior to day of arrival in order to avoid a charge.Failure to do so will incure a penalty equal to the cost of one night's room and tax.
Check the ASTM website for updates on overflow hotel room availability.
ASTM MEMBERS WORK AREA: ASTM will provide computers with internet connections. This area will also be wireless for your laptop computer. You may visit the ASTM website, apply or renew your membership, order publications or check your email. The complimentary wireless service is limited to the members' work area and the meeting rooms.
The hotel is located approximately 5.2miles/20 minutes from the Reagan National Airport, 28.5miles/40 minutes from Dulles International Airport, and 3.4miles/10 minutes from Union Station. The hotel's phone number is (202) 483-3000 and the general fax number is (202) 939-3271. The website for the hotel is Washington Hilton.
For information on the city of Washington DC, visit the Washington DC Convention and Visitors Bureau Website at Washington DC.
RIDESHARING PROGRAM: Transportation Network Providers (TNP), also referred to as a “rideshare” company, provide prearranged transportation through an app, connecting passengers with drivers of vehicles for hire. Lyft and Uber are TNP companies operating in Washington DC.
Uber is offering your first ride FREE (up to $20) for first time riders only. Download the app or visit www.uber.com and enter the code UBERON20.
PARKING: Parking is available with rates of $40 for self-parking and $48 for overnight valet parking.
ASTM staff will provide several training sessions on various subjects to educate and assist officers, members and non-members of ASTM committees. The following topics will be discussed:
Please join us in the discussion of international standards and trade by our experts from the Regional Standards Bodies: GCC Standardization Organization (GSO), CARICOM Regional Organisation for Standards and Quality (CROSQ), and African Organisation for Standardisation (ARSO). This session will provide an insight to the successes and challenges faced by the standards bodies in setting quality standards to ensure health, safety, and trade within their region. Discussion will be led by Mr. Taco van der Maten, Vice Chairman of the ASTM International Board of Directors. All are welcome to attend this session.
This session will inform members on how to effectively move documents through the ASTM balloting process, from initiating a subcommittee ballot through main committee and Society review. A review of the role of COS (Committee on Standards) is included. In addition, learn to get positive results from negative votes! Special focus on the procedural handling of negative votes throughout the balloting process.
During this joint Technical Committee Operations and Editorial module, we will review both new and revised standards as they go through the development and publication process. We will cover how standard ideas are introduced, drafted, and publicized as well as review ASTM's electronic tools and time-tested techniques for accelerating the development of your standard. Included in the workshop will be a brief review of work items registration, the three stages of balloting, and an explanation of the key roles of your editor and the standard's technical contact.
Learn how Training and Proficiency Testing Programs can help you improve proficiency with ASTM Standards and Test Methods! ASTM Training and eLearning offers award-winning continuing education courses and industry leading online training programs. PTP is statistical quality assurance programs that enable laboratories to evaluate and improve performance, and maintain and fulfill mandatory accreditation requirements.
This module is designed to familiarize members with the ILS Program, its features, benefits, capabilities, and the online registration process. Research Reports will also be specifically addressed during the session. This workshop will benefit anyone planning to run (or participate in) an interlaboratory study to generate a precision statement for a new or existing ASTM test method. Presented by Phillip Godorov and Caitlin Farrell, ASTM ILS Staff.
In addition to the ILS Workshop schedule above, several ILS Q&A Sessions have been planned with ASTM ILS Staff. Please feel free to drop by and ask questions about, or brainstorm ideas for, your upcoming interlaboratory studies. ILS Representatives will also be available to review the status of your current interlaboratory studies and help you plan the next steps. Sessions are open to all, and no appointments are needed.
Business development is responsible for identifying, exploring, and coordinating activities such as (a)Research and exploration of new standardization-related activities; (b)Identifying and developing new programs, products and services. (c)Monitoring of emerging issues and national/international priorities for potential business opportunities and (d)Identifying and proposing strategic partnerships with relevant industry organizations (e)Assisting with strategic planning in order to help committee better achieve their goals.
ASTM Certification Program covers products (including materials, processes, and services) and personnel for industries that desire an independent third-party demonstration of compliance to standards and/or are facing regulatory pressures to prove compliance to standards. All of ASTM’s certification programs are offered through our affiliate, the Safety Equipment Institute.
Refreshments will be available at all training sessions.
To access the symposia/workshops/seminar objectives, registration fee information, and online registration, click on the title of the event below. You may also register online to attend a symposium or workshop at the "Register" link above.Workshop on Advances and Experiences in Steel Castings (Monday) (Sponsored by Committee A01).Workshop on Coatings for the Medical Device Industry (Tuesday) (Sponsored by Committee F04).ASTM Symposium on Structural Integrity of Additive Manufactured Parts (Tuesday-Thursday) (Sponsored by Committee F42). Event will be held at Carnegie Endowment for International Peace. Located at 1779 Massachusetts Ave NW, Washingotn, DC 200362018 Workshop on Transparent Enclosures and Materials (Wednesday) (Sponsored by Committee F07).Workshop on Polymer Characterization (Thursday) (Sponsored by Committee D20).14th Annual Hydrogen Embrittlement Workshop (Thursday) (Sponsored by Committee F07).
If you have questions regarding only the symposium/workshop registration the Symposia Department:firstname.lastname@example.org at 610-832-9677.
Several ASTM committees collect a voluntary fee to support activities associated within the committee such as awards, social events, etc. Each committee determines the amount and encourages your contribution. The activity fee can be paid online in advance on the preregistration page. This voluntary contribution is not an ASTM International society fee.
Several committees hold planned banquet events. You have the ability to purchase your tickets online in advance on the preregistration page. Your tickets will be available on-site at the Registration Area.
ASTM meetings offer on-site services from the ASTM staff. We provide photocopying service, audio/visual equipment, and a members' work area with complimentary internet computers.
Join us for breakfast Monday through Thursday from 8:30am to 9:30am at the Washington Hilton. A representative from the Washington DC area will be on hand with information on what to see and do in Washington DC. For city information and brochures, contact the Washingotn DC Convention and Visitor Bureau at Destination DC.
Attendees have the option to determine their dress at ASTM meetings. Business casual attire is acceptable at this meeting and appropriate for Washington DC. The average temperatures in November range from a high of 59 degrees Fahrenheit to a low of 38 degrees Fahrenheit.
Please advise the hotel and ASTM of any disability which will require special attention. The Washington Hilton is in compliance with ADA standards.
For information on ASTM International's products and services, please visit the ASTM website at www.astm.org.
Questions concerning general registration, accommodations, travel, hotel, logistics, etc. contact the ASTM Meetings Department at email@example.com.