Iron and Steel Products

    A1-00(2018) - Standard Specification for Carbon Steel Tee Rails

    A2-02(2020) - Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types

    A3-01(2019) - Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)

    A6/A6M-19 - Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

    A20/A20M-19 - Standard Specification for General Requirements for Steel Plates for Pressure Vessels

    A27/A27M-20 - Standard Specification for Steel Castings, Carbon, for General Application

    A29/A29M-20 - Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought

    A31-14 - Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels

    A36/A36M-19 - Standard Specification for Carbon Structural Steel

    A47/A47M-99(2018)e1 - Standard Specification for Ferritic Malleable Iron Castings

    A48/A48M-03(2016) - Standard Specification for Gray Iron Castings

    A49-12(2019) - Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars

    A53/A53M-20 - Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

    A65-07(2013) - Standard Specification for Steel Track Spikes

    A66-07(2013) - Standard Specification for Steel Screw Spikes

    A67-00(2016) - Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked

    A74-20 - Standard Specification for Cast Iron Soil Pipe and Fittings

    A90/A90M-13(2018) - Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

    A90/A90M-RUS-13(2018) - Стандартный метод определения веса [массы] покрытия на железных и стальных изделиях, покрытых цинком или цинковым сплавом1

    A99-03(2019) - Standard Specification for Ferromanganese

    A100-07(2018) - Standard Specification for Ferrosilicon

    A101-04(2019) - Standard Specification for Ferrochromium

    A102-04(2019) - Standard Specification for Ferrovanadium

    A105/A105M-18 - Standard Specification for Carbon Steel Forgings for Piping Applications

    A106/A106M-19a - Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service

    A108-18 - Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished

    A109/A109M-16(2018) - Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled

    A111-99a(2014) - Standard Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire

    A116-11(2016) - Standard Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric

    A121-19 - Standard Specification for Metallic-Coated Carbon Steel Barbed Wire

    A123/A123M-17 - Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products

    A125-96(2018) - Standard Specification for Steel Springs, Helical, Heat-Treated

    A126-04(2019) - Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings

    A128/A128M-19 - Standard Specification for Steel Castings, Austenitic Manganese

    A131/A131M-19 - Standard Specification for Structural Steel for Ships

    A132-04(2019) - Standard Specification for Ferromolybdenum

    A134/A134M-19 - Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)

    A135/A135M-19 - Standard Specification for Electric-Resistance-Welded Steel Pipe

    A139/A139M-16 - Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)

    A143/A143M-07(2020) - Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement

    A144-04(2019) - Standard Specification for Ferrotungsten

    A146-04(2019) - Standard Specification for Molybdenum Oxide Products

    A148/A148M-20e1 - Standard Specification for Steel Castings, High Strength, for Structural Purposes

    A153/A153M-16a - Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware

    A159-83(2020) - Standard Specification for Automotive Gray Iron Castings

    A178/A178M-19 - Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes

    A179/A179M-19 - Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

    A181/A181M-14 - Standard Specification for Carbon Steel Forgings, for General-Purpose Piping

    A182/A182M-20 - Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

    A183-14(2020) - Standard Specification for Carbon Steel Track Bolts and Nuts

    A184/A184M-19 - Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement

    A192/A192M-17 - Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

    A193/A193M-20 - Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

    A194/A194M-20a - Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

    A197/A197M-00(2019) - Standard Specification for Cupola Malleable Iron

    A203/A203M-17 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel

    A204/A204M-17 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum

    A209/A209M-03(2017) - Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes

    A210/A210M-19 - Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes

    A213/A213M-19a - Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes

    A214/A214M-19 - Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes

    A216/A216M-18 - Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service

    A217/A217M-20 - Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

    A220/A220M-99(2018)e1 - Standard Specification for Pearlitic Malleable Iron

    A225/A225M-17 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel

    A227/A227M-17 - Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs

    A228/A228M-18 - Standard Specification for Steel Wire, Music Spring Quality

    A229/A229M-18 - Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs

    A230/A230M-19 - Standard Specification for Steel Wire, Carbon Valve Spring Quality

    A231/A231M-18 - Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire

    A232/A232M-18 - Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire

    A234/A234M-19 - Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

    A239-14(2019) - Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles

    A240/A240M-19 - Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

    A242/A242M-13(2018) - Standard Specification for High-Strength Low-Alloy Structural Steel

    A242/A242M-SP-13(2018) - Especificación estándar para acero estructural de baja aleación de alta resistencia

    A247-19 - Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings

    A249/A249M-18a - Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

    A252/A252M-19 - Standard Specification for Welded and Seamless Steel Pipe Piles

    A254/A254M-12(2019) - Standard Specification for Copper-Brazed Steel Tubing

    A255-10(2018) - Standard Test Methods for Determining Hardenability of Steel

    A262-15 - Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

    A262-RUS-15 - Стандартные методики выявления склонности к межкристаллитной коррозии аустенитных нержавеющих сталей

    A263-12(2019) - Standard Specification for Stainless Chromium Steel-Clad Plate

    A264-12(2019) - Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate

    A265-12(2019) - Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate

    A266/A266M-18 - Standard Specification for Carbon Steel Forgings for Pressure Vessel Components

    A268/A268M-20 - Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

    A269/A269M-15a(2019) - Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

    A270/A270M-15(2019) - Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing

    A275/A275M-18 - Standard Practice for Magnetic Particle Examination of Steel Forgings

    A276/A276M-17 - Standard Specification for Stainless Steel Bars and Shapes

    A276/A276M-RUS-17 - СТАНДАРТНАЯ СПЕЦИФИКАЦИЯ НЕРЖАВЕЮЩИХ СОРТОВЫХ И ПРОФИЛЬНЫХ СТАЛЕЙ

    A278/A278M-01(2020) - Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650 °F (350 °C)

    A283/A283M-18 - Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

    A285/A285M-17 - Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength

    A288-18 - Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators

    A289/A289M-97(2018) - Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators

    A290/A290M-16 - Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears

    A291/A291M-19 - Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears

    A295/A295M-14(2020) - Standard Specification for High-Carbon Anti-Friction Bearing Steel

    A297/A297M-19 - Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application

    A299/A299M-17 - Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon

    A302/A302M-17 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

    A304-20 - Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements

    A307-14e1 - Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength

    A307-SP-14e1 - Especificación estándar para pernos, espárragos y varilla roscada de acero al carbono de 60 000 PSI de resistencia a la tracción

    A311/A311M-04(2015) - Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements

    A312/A312M-19 - Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

    A313/A313M-18 - Standard Specification for Stainless Steel Spring Wire

    A314-19 - Standard Specification for Stainless Steel Billets and Bars for Forging

    A319-71(2020) - Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure-Containing Parts

    A320/A320M-18 - Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service

    A322-13(2018)e1 - Standard Specification for Steel Bars, Alloy, Standard Grades

    A323-05(2020) - Standard Specification for Ferroboron

    A324-08(2019) - Standard Specification for Ferrotitanium

    A327/A327M-11(2017) - Standard Test Methods for Impact Testing of Cast Irons

    A328/A328M-13a(2018) - Standard Specification for Steel Sheet Piling

    A333/A333M-18 - Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness

    A334/A334M-04a(2016) - Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service

    A335/A335M-19a - Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

    A336/A336M-19 - Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

    A338-84(2018) - Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy-Duty Service at Temperatures Up to 650 °F (345 °C)

    A350/A350M-18 - Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components

    A351/A351M-18e1 - Standard Specification for Castings, Austenitic, for Pressure-Containing Parts

    A352/A352M-18a - Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service

    A353/A353M-17 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 % Nickel

    A354-17e2 - Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

    A355-89(2017) - Standard Specification for Steel Bars, Alloys, for Nitriding

    A356/A356M-16 - Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines

    A358/A358M-19 - Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications

    A363-03(2020)e1 - Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand

    A367-11(2017) - Standard Test Methods of Chill Testing of Cast Iron

    A368-95a(2019) - Standard Specification for Stainless Steel Wire Strand

    A369/A369M-18a - Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service

    A370-19e1 - Standard Test Methods and Definitions for Mechanical Testing of Steel Products

    A370-SP-19e1 - Métodos de prueba estándar y definiciones para pruebas mecánicas de productos de acero

    A372/A372M-20 - Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels

    A376/A376M-19 - Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service

    A377-18 - Standard Index of Specifications for Ductile Iron Pressure Pipe

    A380/A380M-17 - Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems

    A381/A381M-18 - Standard Specification for Metal-Arc-Welded Carbon or High-Strength Low-Alloy Steel Pipe for Use With High-Pressure Transmission Systems

    A384/A384M-07(2019) - Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies

    A385/A385M-20 - Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)

    A387/A387M-17a - Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum

    A388/A388M-19 - Standard Practice for Ultrasonic Examination of Steel Forgings

    A389/A389M-13(2018) - Standard Specification for Steel Castings, Alloy, Specially Heat Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service

    A390-06(2016) - Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)

    A391/A391M-07(2012) - Standard Specification for Grade 80 Alloy Steel Chain

    A392-11a(2017) - Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric

    A394-08(2015) - Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare

    A395/A395M-99(2018) - Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures

    A400-17 - Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties

    A401/A401M-18 - Standard Specification for Steel Wire, Chromium-Silicon Alloy

    A403/A403M-20 - Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

    A407-18 - Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs

    A409/A409M-19 - Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service

    A411-08(2017) - Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire

    A413/A413M-07(2012) - Standard Specification for Carbon Steel Chain

    A414/A414M-14(2019) - Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels

    A416/A416M-18 - Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete

    A418/A418M-15(2020) - Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings

    A420/A420M-20 - Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

    A421/A421M-15 - Standard Specification for Stress-Relieved Steel Wire for Prestressed Concrete

    A421/A421M-SP-15 - Especificación Normalizada para Alambre de Acero Aliviado Esfuerzos sin Recubrimiento para Concreto Preesforzado

    A423/A423M-19 - Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes

    A424/A424M-18 - Standard Specification for Steel, Sheet, for Porcelain Enameling

    A426/A426M-18 - Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service

    A428/A428M-10(2019) - Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles

    A434/A434M-18 - Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered

    A435/A435M-17 - Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates

    A436-84(2020) - Standard Specification for Austenitic Gray Iron Castings

    A437/A437M-15 - Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service

    A439/A439M-18 - Standard Specification for Austenitic Ductile Iron Castings

    A447/A447M-11(2016) - Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service

    A449-14 - Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

    A450/A450M-18a - Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes

    A451/A451M-19 - Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service

    A453/A453M-17 - Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels

    A455/A455M-12a(2017) - Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese

    A456/A456M-08(2018) - Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings

    A459-08(2013) - Standard Specification for Zinc-Coated Flat Steel Armoring Tape

    A459-RUS-08(2013) - Стандартная спецификация на бронеленту из оцинкованной полосовой стали

    A460-11(2016) - Standard Specification for Copper-Clad Steel Wire Strand

    A463/A463M-15(2020)e1 - Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process

    A466/A466M-07(2020) - Standard Specification for Weldless Chain

    A467/A467M-20 - Standard Specification for Machine and Coil Chain

    A469/A469M-07(2017) - Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors

    A470/A470M-05(2020) - Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts

    A471/A471M-19 - Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels

    A472/A472M-07(2017) - Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings

    A473-19 - Standard Specification for Stainless Steel Forgings

    A474-03(2017) - Standard Specification for Aluminum-Coated Steel Wire Strand

    A475-03(2014) - Standard Specification for Zinc-Coated Steel Wire Strand

    A476/A476M-00(2018) - Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls

    A478-97(2019) - Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire

    A479/A479M-19 - Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

    A480/A480M-20 - Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

    A481-05(2020) - Standard Specification for Chromium Metal

    A482/A482M-11(2016) - Standard Specification for Ferrochrome-Silicon

    A483/A483M-10(2020) - Standard Specification for Silicomanganese

    A484/A484M-20a - Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings

    A485-17 - Standard Specification for High Hardenability Antifriction Bearing Steel

    A487/A487M-20 - Standard Specification for Steel Castings Suitable for Pressure Service

    A488/A488M-18e2 - Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

    A489-18e1 - Standard Specification for Carbon Steel Eyebolts

    A491-11(2017) - Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric

    A492-95(2019) - Standard Specification for Stainless Steel Rope Wire

    A493-16 - Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging

    A494/A494M-18a - Standard Specification for Castings, Nickel and Nickel Alloy

    A495-06(2020) - Standard Specification for Calcium-Silicon Alloys

    A498/A498M-17 - Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins

    A499-15 - Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails

    A500/A500M-20 - Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

    A501/A501M-14 - Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing

    A502-03(2015) - Standard Specification for Rivets, Steel, Structural

    A503/A503M-15(2020) - Standard Specification for Ultrasonic Examination of Forged Crankshafts

    A504/A504M-18 - Standard Specification for Wrought Carbon Steel Wheels

    A505-16 - Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

    A506-16 - Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

    A507-16 - Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

    A508/A508M-18 - Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels

    A510/A510M-18 - Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel

    A511/A511M-16 - Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar

    A512-18 - Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing

    A513/A513M-20 - Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing

    A514/A514M-18e1 - Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding

    A515/A515M-17 - Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service

    A516/A516M-17 - Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service

    A517/A517M-17 - Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered

    A518/A518M-99(2018) - Standard Specification for Corrosion-Resistant High-Silicon Iron Castings

    A519/A519M-17 - Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing

    A522/A522M-14(2019) - Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service

    A523/A523M-20 - Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits

    A524-17 - Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures

    A529/A529M-19 - Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality

    A530/A530M-18 - Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe

    A531/A531M-18 - Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings

    A532/A532M-10(2019) - Standard Specification for Abrasion-Resistant Cast Irons

    A533/A533M-16 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

    A534-17 - Standard Specification for Carburizing Steels for Anti-Friction Bearings

    A536-84(2019)e1 - Standard Specification for Ductile Iron Castings

    A537/A537M-20 - Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel

    A540/A540M-15 - Standard Specification for Alloy-Steel Bolting for Special Applications

    A541/A541M-05(2020) - Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components

    A542/A542M-19 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium

    A543/A543M-09(2014) - Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum

    A550-16 - Standard Specification for Ferrocolumbium (Ferroniobium)

    A551/A551M-08(2018) - Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications

    A553/A553M-17e1 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7, 8, and 9 % Nickel

    A554-16 - Standard Specification for Welded Stainless Steel Mechanical Tubing

    A555/A555M-20 - Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods

    A556/A556M-18 - Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes

    A560/A560M-12(2018) - Standard Specification for Castings, Chromium-Nickel Alloy

    A561-08(2020) - Standard Practice for Macroetch Testing of Tool Steel Bars

    A562/A562M-10(2015) - Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings

    A563M-07(2013) - Standard Specification for Carbon and Alloy Steel Nuts (Metric)

    A563-15 - Standard Specification for Carbon and Alloy Steel Nuts

    A564/A564M-19a - Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

    A565/A565M-10(2017)e1 - Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service

    A568/A568M-19a - Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

    A571/A571M-01(2019) - Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service

    A572/A572M-18 - Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

    A572/A572M-SP-18 - Especificación estándar para acero estructural niobio-vanadio de baja aleación y alta resistencia

    A573/A573M-13 - Standard Specification for Structural Carbon Steel Plates of Improved Toughness

    A574-17 - Standard Specification for Alloy Steel Socket-Head Cap Screws

    A575-20 - Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades

    A576-17 - Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality

    A577/A577M-17 - Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates

    A578/A578M-17 - Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications

    A578/A578M-RUS-17 - Стандартная спецификация на ультразвуковое исследование узконаправленным пучком толстолистового стального проката специального назначения

    A579/A579M-20 - Standard Specification for Superstrength Alloy Steel Forgings

    A580/A580M-18 - Standard Specification for Stainless Steel Wire

    A581/A581M-95b(2014) - Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods

    A582/A582M-12(2017) - Standard Specification for Free-Machining Stainless Steel Bars

    A586-18 - Standard Specification for Metallic-Coated Parallel and Helical Steel Wire Structural Strand

    A587-96(2019) - Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry

    A588/A588M-19 - Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance

    A589/A589M-06(2018) - Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe

    A592/A592M-10(2020) - Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels

    A595/A595M-18 - Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use

    A597/A597M-14(2020) - Standard Specification for Cast Tool Steel

    A599/A599M-07(2017) - Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet

    A600-92a(2016) - Standard Specification for Tool Steel High Speed

    A601/A601M-10(2020) - Standard Specification for Electrolytic Manganese Metal

    A602-94(2018) - Standard Specification for Automotive Malleable Iron Castings

    A603-19 - Standard Specification for Metallic-Coated Steel Structural Wire Rope

    A604/A604M-07(2017) - Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets

    A606/A606M-18 - Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance

    A608/A608M-20 - Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures

    A609/A609M-12(2018) - Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof

    A610-79(2019) - Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size

    A612/A612M-20 - Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service

    A615/A615M-20 - Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

    A618/A618M-04(2015) - Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing

    A623M-16 - Standard Specification for Tin Mill Products, General Requirements [Metric]

    A623-16 - Standard Specification for Tin Mill Products, General Requirements

    A624/A624M-13(2018) - Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced

    A625/A625M-13(2018) - Standard Specification for Tin Mill Products, Black Plate, Single-Reduced

    A626/A626M-16 - Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced

    A630-16ae1 - Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate

    A632-19 - Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service

    A633/A633M-18 - Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates

    A635/A635M-15 - Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for

    A636-08(2018) - Standard Specification for Nickel Oxide Sinter

    A638/A638M-20 - Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service

    A640-97(2019) - Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable

    A641/A641M-19 - Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire

    A644-17 - Standard Terminology Relating to Iron Castings

    A645/A645M-10(2016) - Standard Specification for Pressure Vessel Plates, 5 % and 51 2 % Nickel Alloy Steels, Specially Heat Treated

    A646/A646M-17 - Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings

    A648-18 - Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe

    A649/A649M-10(2020) - Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery

    A650/A650M-18 - Standard Specification for Tin Mill Products, Black Plate, Double Reduced

    A653/A653M-20 - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

    A656/A656M-18 - Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability

    A657/A657M-18 - Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced

    A659/A659M-18 - Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled

    A660/A660M-11(2016) - Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service

    A662/A662M-17 - Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service

    A663/A663M-17 - Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties

    A666-15 - Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar

    A667/A667M-87(2018) - Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders

    A668/A668M-20a - Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use

    A671/A671M-20 - Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures

    A672/A672M-19 - Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures

    A673/A673M-17 - Standard Specification for Sampling Procedure for Impact Testing of Structural Steel

    A673/A673M-RUS-17 - Стандартная спецификация на процедуру отбора образцов конструкционной стали для испытаний на ударную вязкость

    A674-18 - Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids

    A675/A675M-14(2019) - Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties

    A679/A679M-17 - Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn

    A681-08(2015) - Standard Specification for Tool Steels Alloy

    A684/A684M-17 - Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled

    A686-92(2016) - Standard Specification for Tool Steel, Carbon

    A688/A688M-18 - Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes

    A689-97(2018) - Standard Specification for Carbon and Alloy Steel Bars for Springs

    A690/A690M-13a(2018) - Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments

    A691/A691M-19 - Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures

    A693-16 - Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

    A694/A694M-16 - Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service

    A696-17 - Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components

    A700-14(2019) - Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment

    A701/A701M-10(2020) - Standard Specification for Ferromanganese-Silicon

    A702-13(2018) - Standard Specification for Steel Fence Posts, Hot Wrought

    A703/A703M-18a - Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

    A704/A704M-19e1 - Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement

    A705/A705M-20 - Standard Specification for Age-Hardening Stainless Steel Forgings

    A706/A706M-16 - Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement

    A706/A706M-SP-16 - Especificación Normalizada para Barras de Acero de Baja Aleación Lisas y Corrugadas para Refuerzo de Concreto

    A706/A706M-RUS-16 - СТАНДАРТНАЯ СПЕЦИФИКАЦИЯ НА ФАСОННЫЕ И ГЛАДКИЕ АРМАТУРНЫЕ СТЕРЖНИ ИЗ НИЗКОЛЕГИРОВАННОЙ СТАЛИ ДЛЯ ЖЕЛЕЗОБЕТОНА

    A707/A707M-19 - Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service

    A709/A709M-18 - Standard Specification for Structural Steel for Bridges

    A710/A710M-19 - Standard Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy Structural Steel Plates

    A711/A711M-17 - Standard Specification for Steel Forging Stock

    A713-04(2017) - Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components

    A716-18 - Standard Specification for Ductile Iron Culvert Pipe

    A722/A722M-18 - Standard Specification for High-Strength Steel Bars for Prestressed Concrete

    A722/A722M-SP-18 - Especificación estándar para barras de acero de alta resistencia para hormigón pretensado

    A723/A723M-18a - Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application

    A724/A724M-09(2018) - Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels

    A727/A727M-14(2019) - Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness

    A729/A729M-17 - Standard Specification for Carbon and Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service

    A732/A732M-20 - Standard Specification for Castings, Investment, Carbon and Low-Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures

    A733-16 - Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples

    A736/A736M-17 - Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy Steel

    A737/A737M-17 - Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel

    A738/A738M-19 - Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service

    A739-90a(2016) - Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both

    A740-98(2014) - Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)

    A741-11(2016) - Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail

    A742/A742M-20 - Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe

    A743/A743M-19 - Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application

    A744/A744M-13 - Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service

    A745/A745M-20 - Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings

    A746-18 - Standard Specification for Ductile Iron Gravity Sewer Pipe

    A747/A747M-18 - Standard Specification for Steel Castings, Stainless, Precipitation Hardening

    A748/A748M-87(2018) - Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use

    A749/A749M-14 - Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for

    A751-14a - Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

    A751-RUS-14a - СТАНДАРТНЫЕ МЕТОДЫ ИСПЫТАНИЙ, ПРАВИЛА И ТЕРМИНОЛОГИЯ ДЛЯ ХИМИЧЕСКОГО АНАЛИЗА СТАЛЬНОЙ ПРОДУКЦИИ

    A754/A754M-18 - Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence

    A755/A755M-18 - Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products

    A756-17 - Standard Specification for Stainless Anti-Friction Bearing Steel

    A757/A757M-15 - Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service

    A758/A758M-14(2019) - Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness

    A759-10(2016) - Standard Specification for Carbon Steel Crane Rails

    A760/A760M-15(2020) - Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains

    A761/A761M-18 - Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches

    A762/A762M-19 - Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains

    A763-15 - Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels

    A764-07(2017) - Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs

    A765/A765M-07(2017) - Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements

    A767/A767M-19 - Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

    A769/A769M-17 - Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes

    A770/A770M-03(2018) - Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications

    A774/A774M-14(2019) - Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures

    A775/A775M-19 - Standard Specification for Epoxy-Coated Steel Reinforcing Bars

    A778/A778M-16 - Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products

    A779/A779M-16 - Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete

    A780/A780M-09(2015) - Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings

    A781/A781M-18c - Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

    A786/A786M-15 - Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates

    A787/A787M-15a - Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing

    A788/A788M-19a - Standard Specification for Steel Forgings, General Requirements

    A789/A789M-20 - Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service

    A790/A790M-20 - Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe

    A792/A792M-10(2015) - Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process

    A793-96(2014) - Standard Specification for Rolled Floor Plate, Stainless Steel

    A794/A794M-18 - Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled

    A795/A795M-13(2020) - Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use

    A796/A796M-17a - Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications

    A798/A798M-17 - Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications

    A799/A799M-10(2020) - Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content

    A800/A800M-20 - Standard Practice for Estimating Ferrite Content of Stainless Steel Castings Containing Both Ferrite and Austenite

    A802-19 - Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination

    A803/A803M-16 - Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes

    A805/A805M-09(2016) - Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled

    A807/A807M-19 - Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications

    A809-08(2017) - Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire

    A810-01(2019) - Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh

    A813/A813M-14(2019) - Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe

    A814/A814M-15(2019) - Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe

    A815/A815M-20 - Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings

    A817-12(2017) - Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire

    A818-06(2016) - Standard Specification for Coppered Carbon Steel Wire

    A820/A820M-16 - Standard Specification for Steel Fibers for Fiber-Reinforced Concrete

    A820/A820M-SP-16 - Especificación estándar para fibras de acero para hormigón reforzado con fibra

    A821/A821M-15 - Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks

    A822/A822M-20 - Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service

    A823-99(2019) - Standard Specification for Statically Cast Permanent Mold Gray Iron Castings

    A824-01(2017) - Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence

    A827/A827M-14(2018) - Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications

    A829/A829M-17 - Standard Specification for Alloy Structural Steel Plates

    A830/A830M-18 - Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements

    A832/A832M-17 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium

    A833-19 - Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers

    A834-95(2020) - Standard Specification for Common Requirements for Iron Castings for General Industrial Use

    A835/A835M-10(2020) - Standard Specification for Sizes of Ferroalloys and Alloy Additives

    A836/A836M-14 - Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service

    A837/A837M-17 - Standard Specification for Steel Forgings, Alloy, for Carburizing Applications

    A841/A841M-17 - Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)

    A842-11A(2018)e1 - Standard Specification for Compacted Graphite Iron Castings

    A844/A844M-09(2015) - Standard Specification for Steel Plates, 9 %  Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process

    A847/A847M-14 - Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance

    A849-15 - Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe

    A853-19 - Standard Specification for Steel Wire, Carbon, for General Use

    A854/A854M-08(2017) - Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire

    A855/A855M-03(2014) - Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Wire Strand

    A856/A856M-03(2014) - Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire

    A857/A857M-19 - Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage

    A858/A858M-19 - Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service

    A859/A859M-04(2019)e1 - Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components

    A860/A860M-18 - Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings

    A861-04(2017) - Standard Specification for High-Silicon Iron Pipe and Fittings

    A862/A862M-98(2020) - Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe

    A865/A865M-06(2017) - Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints

    A866-18 - Standard Specification for Medium Carbon Anti-Friction Bearing Steel

    A871/A871M-20 - Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance

    A872/A872M-14 - Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments

    A874/A874M-98(2018)e1 - Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service

    A875/A875M-13 - Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process

    A877/A877M-17 - Standard Specification for Steel Wire, Chromium-Silicon Alloys, Chrome-Silicon-Vanadium Alloy Valve Spring Quality

    A878/A878M-19 - Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality

    A879/A879M-12(2017) - Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface

    A881/A881M-16a - Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete

    A882/A882M-20 - Standard Specification for Filled Epoxy-Coated Seven-Wire Steel Prestressing Strand

    A884/A884M-19 - Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement

    A886/A886M-17 - Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete

    A887-89(2014) - Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application

    A888-20 - Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications

    A890/A890M-18a - Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application

    A891/A891M-16 - Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels

    A892-09(2020) - Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels

    A895-89(2017) - Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip

    A896/A896M-09(2019) - Standard Practice for Conducting Case Studies on Galvanized Structures

    A897/A897M-16 - Standard Specification for Austempered Ductile Iron Castings

    A898/A898M-17 - Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes

    A899-91(2014) - Standard Specification for Steel Wire, Epoxy-Coated

    A902-18a - Standard Terminology Relating to Metallic Coated Steel Products

    A903/A903M-99(2017) - Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection

    A905-19 - Standard Specification for Steel Wire, Pressure Vessel Winding

    A906/A906M-02(2016) - Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting

    A908-03(2019) - Standard Specification for Stainless Steel Needle Tubing

    A909/A909M-06(2016) - Standard Specification for Steel Forgings, Microalloy, for General Industrial Use

    A910/A910M-18 - Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete

    A911/A911M-15 - Standard Specification for Low-Relaxation Steel Bars for Prestressed Concrete Railroad Ties

    A913/A913M-19 - Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)

    A914/A914M-19 - Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements

    A915/A915M-08(2018) - Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades

    A917-08(2020) - Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)

    A918-06(2019) - Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface

    A920/A920M-14(2019) - Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties

    A921/A921M-93(2016) - Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging

    A922-05(2020) - Standard Specification for Silicon Metal

    A923-14 - Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels

    A924/A924M-19 - Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

    A925-03(2014) - Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand

    A928/A928M-14 - Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal

    A929/A929M-18 - Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe

    A930-09(2014) - Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits

    A931-18 - Standard Test Method for Tension Testing of Wire Ropes and Strand

    A934/A934M-19 - Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars

    A938-18 - Standard Test Method for Torsion Testing of Wire

    A939/A939M-15(2020) - Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings

    A941-18 - Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys

    A942/A942M-95(2018) - Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells

    A943/A943M-01(2019) - Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes

    A944-10(2015) - Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens

    A945/A945M-16 - Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness

    A947M-16 - Standard Specification for Textured Stainless Steel Sheet [Metric]

    A949/A949M-01(2019) - Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe

    A950/A950M-11(2015) - Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling

    A951/A951M-16e1 - Standard Specification for Steel Wire for Masonry Joint Reinforcement

    A952/A952M-02(2016) - Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links

    A955/A955M-20c - Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement

    A956/A956M-17a - Standard Test Method for Leeb Hardness Testing of Steel Products

    A957/A957M-18a - Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use

    A958/A958M-17 - Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades

    A959-19 - Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels

    A960/A960M-20 - Standard Specification for Common Requirements for Wrought Steel Piping Fittings

    A961/A961M-20 - Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications

    A962/A962M-19 - Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range

    A964/A964M-17 - Standard Specification for Corrugated Steel Box Culverts

    A965/A965M-20 - Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts

    A966/A966M-15(2020) - Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current

    A967/A967M-17 - Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts

    A970/A970M-18 - Standard Specification for Headed Steel Bars for Concrete Reinforcement

    A970/A970M-SP-18 - Especificación estándar para barras de acero con cabeza para refuerzo del hormigón

    A972/A972M-00(2015) - Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles

    A973/A973M-07(2012) - Standard Specification for Grade 100 Alloy Steel Chain

    A974-97(2016) - Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated)

    A975-11(2016) - Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)

    A979/A979M-03(2019) - Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field

    A980/A980M-19 - Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled

    A981/A981M-11(2016) - Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors

    A982/A982M-10(2020) - Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils

    A983/A983M-06(2016) - Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines

    A985/A985M-19 - Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts

    A986/A986M-01(2016) - Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings

    A987/A987M-19 - Standard Practice for Measuring Shape Characteristics of Tin Mill Products

    A988/A988M-17 - Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

    A989/A989M-18 - Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

    A990/A990M-18 - Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure-Retaining Parts for Corrosive Service

    A991/A991M-17 - Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products

    A992/A992M-20 - Standard Specification for Structural Steel Shapes

    A994-18 - Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys

    A995/A995M-20 - Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts

    A996/A996M-16 - Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement

    A997-08(2018) - Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination

    A998/A998M-18 - Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications

    A999/A999M-18 - Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

    A1000/A1000M-17 - Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality

    A1001-18 - Standard Specification for High-Strength Steel Castings in Heavy Sections

    A1002-16(2020) - Standard Specification for Castings, Nickel-Aluminum Ordered Alloy

    A1003/A1003M-15 - Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members

    A1004/A1004M-99(2018) - Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members

    A1007-15 - Standard Specification for Carbon Steel Wire for Wire Rope

    A1008/A1008M-18 - Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable

    A1010/A1010M-13(2018) - Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip

    A1011/A1011M-18a - Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

    A1012-10(2015) - Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins

    A1014/A1014M-16e1 - Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service

    A1015-01(2018) - Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications

    A1016/A1016M-18a - Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

    A1017/A1017M-17 - Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten

    A1018/A1018M-18 - Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

    A1021/A1021M-20 - Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service

    A1022/A1022M-16b - Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement

    A1022/A1022M-SP-16b - Especificación estándar para alambres de acero inoxidable corrugados y lisos, y alambre soldado para refuerzo de hormigón

    A1023/A1023M-19 - Standard Specification for Carbon Steel Wire Ropes for General Purposes

    A1024/A1024M-18 - Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless

    A1025/A1025M-10(2020) - Standard Specification for Ferroalloys and Other Alloying Materials, General Requirements

    A1028-03(2015) - Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils

    A1030/A1030M-16 - Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products

    A1031/A1031M-12(2017) - Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled

    A1032-15(2019) - Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe

    A1033-18 - Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations

    A1034/A1034M-10a(2015) - Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars

    A1035/A1035M-20 - Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement

    A1038-19 - Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method

    A1039/A1039M-19 - Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process

    A1040-17 - Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels

    A1040-RUS-17 - СТАНДАРТНОЕ РУКОВОДСТВО ПО УСТАНОВЛЕНИЮ ГАРМОНИЗИРОВАННЫХ СТАНДАРТНЫХ СОСТАВОВ ДЛЯ МАРОК ДЕФОРМИРУЕМОЙ УГЛЕРОДИСТОЙ, НИЗКОЛЕГИРОВАННОЙ И ЛЕГИРОВАННОЙ СТАЛИ

    A1043/A1043M-18 - Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings

    A1044/A1044M-16ae1 - Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete

    A1045-10(2017) - Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems

    A1046/A1046M-19 - Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process

    A1047/A1047M-05(2019) - Standard Test Method for Pneumatic Leak Testing of Tubing

    A1049/A1049M-18 - Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components

    A1053/A1053M-12(2017) - Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe

    A1055/A1055M-16 - Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars

    A1055/A1055M-SP-16 - Especificación estándar para conjuntos de espárragos de acero para refuerzo de esfuerzo cortante del hormigónEspecificación estándar para barras de acero de refuerzo con doble recubrimiento de zinc y epoxi

    A1056-20 - Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings

    A1057/A1057M-08(2019) - Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process

    A1058-19 - Standard Test Methods for Mechanical Testing of Steel Products—Metric

    A1059/A1059M-18 - Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products

    A1060/A1060M-16b - Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete

    A1060/A1060M-SP-16b - Especificación estándar para refuerzo de alambre soldado de acero (galvanizado) revestido en zinc, liso y corrugado, para hormigón

    A1061/A1061M-20 - Standard Test Methods for Testing Multi-Wire Steel Prestressing Strand

    A1062-10(2020) - Standard Specification for Steel Castings Sampling

    A1063/A1063M-19 - Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process

    A1064/A1064M-18a - Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

    A1064/A1064M-SP-18a - Especificación estándar para refuerzo de alambre soldado y alambre de acero al carbono, liso y corrugado, para hormigón

    A1065/A1065M-18 - Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point

    A1066/A1066M-11(2015)e2 - Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)

    A1067/A1067M-12a(2018) - Standard Specification for Test Coupons for Steel Castings

    A1068-10(2020) - Standard Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products

    A1069/A1069M-19 - Standard Specification for Laser and Laser Hybrid Welded Stainless Steel Bars, Plates, and Shapes

    A1072/A1072M-11(2020) - Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products

    A1073/A1073M-17 - Standard Practice for Using Hand Micrometers to Measure the Thickness of Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet

    A1074-11(2020) - Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals

    A1075-12(2017)e1 - Standard Specification for Flanged Steel U-Channel Posts

    A1076/A1076M-20 - Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel

    A1077/A1077M-14 - Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings

    A1078/A1078M-19 - Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement

    A1079-17 - Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

    A1080/A1080M-19 - Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings

    A1081/A1081M-15 - Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand

    A1082/A1082M-16 - Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications

    A1083/A1083M-12(2017) - Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process

    A1084-15a - Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels

    A1085/A1085M-15 - Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)

    A1085/A1085M-SP-15 - Especificación estándar para secciones estructurales huecas de acero al carbono soldadas conformadas en frío (HSS)

    A1087/A1087M-16 - Standard Practice for Using Hand Calipers to Measure the Width of Steel Sheet

    A1088-13(2019) - Standard Specification for Steel, Sheet, Cold-Rolled, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP)

    A1089/A1089M-14(2020) - Standard Specification for Highly Loaded Anti-Friction Bearing Steel

    A1090/A1090M-19 - Standard Specification for Forged Rings and Hollows for Use as Base Plates in Power Transmission Structures

    A1091/A1091M-16e1 - Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service

    A1092-15(2020) - Standard Specification for Steel Sheet, as Cold-Reduced, for Conversion to Annealed Cold-Rolled Steel Sheet, and Hot Dip Metallic-Coated Steel Sheet

    A1093/A1093M-15(2020)e1 - Standard Specification for Electrolytic Plasma Treatment Processing of Conductive Materials

    A1094/A1094M-18 - Standard Specification for Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcement

    A1095-15(2019) - Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings

    A1096/A1096M-15 - Standard Test Method for Evaluating Bond of Individual Steel Wire, Indented or Plain, for Concrete Reinforcement

    A1097-16 - Standard Specification for Steel Casing Pipe, Electric-Fusion (Arc)-Welded (Outside Diameter of 10 in. and Larger)

    A1098/A1098M-18 - Standard Specification for Welded Austenitic, Ferritic, Martensitic and Duplex Stainless Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s)

    A1099/A1099M-20 - Standard Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels

    A1100-16 - Standard Guide for Qualification and Control of Induction Heat Treating

    A1103/A1103M-16 - Standard Specification for Seamless Cold-Finished Carbon Steel Structural Frame Tubing for Automotive Racing Applications

    A1105-17 - Standard Specification for Corrugated Steel Manhole Assemblies

    A1106/A1106M-17 - Standard Specification for Pressure Vessel Plate, Alloy Steel, Austenitic High Manganese for Cryogenic Application

    A1107/A1107M-17 - Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Steel Drainage Pipes

    A1108-17 - Standard Test Method for Determining the Ultimate Strength of Deep Corrugated Structural Plate Bolted Longitudinal Lapped Seams

    A1109-18 - Standard Specification for Special Fittings for Single-Stack Hubless Cast Iron Soil Pipe Fittings for Sanitary, Waste, and Vent Piping Applications

    A1110/A1110M-18 - Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes with 52 KSI [360 MPa] Minimum Yield Strength and Impact Requirements

    A1111-18 - Standard Specification for Cast Iron Closet Flanges for Use With Cast Iron Soil Pipe and Fittings in Gravity Flow Plumbing Drain, Waste, and Vent Sanitary Applications

    A1112/A1112M-18 - Standard Specification for Cold-Formed Welded High Strength Carbon Steel or High-Strength Low-Alloy Steel Hollow Structural Sections (HSS) in Rounds and Shapes

    A1113/A1113M-20 - Standard Specification for Corrugated Steel Structural Plate, Polymer-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches

    A1114/A1114M-20 - Standard Specification for Low-Relaxation, Seven-Wire, Grade 240 [1655], Stainless Steel Strand for Prestressed Concrete

    A1115/A1115M-19 - Standard Practice for Construction of Mechanically Stabilized Earth Walls with Inextensible Soil Reinforcement

    C564-20a - Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings

    C1173-18 - Standard Specification for Flexible Transition Couplings for Underground Piping Systems

    C1277-20 - Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings

    C1440-17 - Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems

    C1460-17 - Standard Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground

    C1461-08(2017) - Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use

    C1540-20 - Standard Specification for Heavy-Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings

    C1541-12(2017) - Standard Specification for Shielded Transition Couplings Using Flexible Polyvinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings

    C1563-08(2017) - Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications

    D3963/D3963M-15 - Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars

    E527-16 - Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)

    E588-03(2020) - Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method

    E618-07(2018) - Standard Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine

    F432-19 - Standard Specification for Roof and Rock Bolts and Accessories

    F436/F436M-19 - Standard Specification for Hardened Steel Washers Inch and Metric Dimensions

    F467-13(2018) - Standard Specification for Nonferrous Nuts for General Use

    F467M-06a(2018) - Standard Specification for Nonferrous Nuts for General Use (Metric)

    F468-16 - Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use

    F468M-06(2018) - Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)

    F537-01(2019) - Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials

    F541-12 - Standard Specification for Alloy Steel Eyebolts

    F547-17 - Standard Terminology of Nails for Use with Wood and Wood-Base Materials

    F552-14(2019) - Standard Terminology Relating to Chain Link Fencing

    F567-14a(2019) - Standard Practice for Installation of Chain-Link Fence

    F593-17 - Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

    F594-09(2020) - Standard Specification for Stainless Steel Nuts

    F606/F606M-19 - Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets

    F626-14(2019) - Standard Specification for Fence Fittings

    F654-07(2017) - Standard Specification for Residential Chain Link Fence Gates

    F668-17 - Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric

    F670-02(2017) - Standard Specification for Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing

    F680-17 - Standard Test Methods for Nails

    F681-82(2018) - Standard Practice for Use of Branch Connections

    F682-82a(2018) - Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings

    F683-14 - Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery

    F704-81(2018)e1 - Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints

    F707/F707M-94(2019)e1 - Standard Specification for Modular Gauge Boards

    F708-92(2018)e1 - Standard Practice for Design and Installation of Rigid Pipe Hangers

    F718-07(2017) - Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet

    F721-18 - Standard Specification for Gage Piping Assemblies

    F722-18 - Standard Specification for Welded Joints for Shipboard Piping Systems

    F765-93(2017) - Standard Specification for Wildcats, Ship Anchor Chain

    F782-19 - Standard Specification for Doors, Furniture, Marine

    F783-88(2018) - Standard Specification for Staple, Handgrab, Handle, and Stirrup Rung

    F788-20 - Standard Specification for Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series

    F812-12(2017) - Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series

    F821/F821M-01(2018) - Standard Specification for Domestic Use Doors and Frames, Steel, Interior, Marine

    F822-93(2017) - Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine

    F823-93(2017) - Standard Specification for Desk, Log, Marine, Steel, with Cabinet

    F824-93(2017) - Standard Specification for Tables, Mess, Marine, Steel

    F825-93(2017) - Standard Specification for Drawers, Furniture, Marine, Steel

    F826-94(2017) - Standard Specification for Tops, Furniture, Marine, Steel

    F835-18 - Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

    F836M-20 - Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric)

    F837-20 - Standard Specification for Stainless Steel Socket Head Cap Screws

    F837M-20 - Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]

    F841-19 - Standard Specification for Thrusters, Tunnel, Permanently Installed in Marine Vessels

    F844-07a(2013) - Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use

    F856-97(2018) - Standard Practice for Mechanical Symbols, Shipboard—Heating, Ventilation, and Air Conditioning (HVAC)

    F879M-16 - Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)

    F879-15(2020) - Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws

    F880M-16 - Standard Specification for Stainless Steel Socket Set Screws (Metric)

    F880-12(2017) - Standard Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws

    F885-84(2017) - Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS 14 to 2

    F900-11(2017) - Standard Specification for Industrial and Commercial Steel Swing Gates

    F901-20 - Standard Specification for Aluminum Transmission Tower Bolts and Nuts

    F906-85(2020) - Standard Specification for Letters and Numerals for Ships

    F912-11(2017) - Standard Specification for Alloy Steel Socket Set Screws

    F934-96(2017) - Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials

    F940-99(2019)e1 - Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding

    F941-99(2019) - Standard Practice for Inspection of Marine Surface Preparation and Coating Application

    F956-91(2018) - Standard Specification for Bell, Cast, Sound Signalling

    F957-91(2018) - Standard Specification for Gong, Sound Signaling

    F959/F959M-17a - Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series

    F964-13(2019) - Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing

    F969-11(2016) - Standard Practice for Construction of Chain-Link Tennis Court Fence

    F985-18 - Standard Specification for Pilot Platform

    F986-86(2018)e1 - Standard Specification for Suction Strainer Boxes

    F987-04(2017) - Standard Specification for Portable Intermediate Flush Deck Stanchion

    F992-17 - Standard Specification for Valve Label Plates

    F993-17 - Standard Specification for Valve Locking Devices

    F994-86(2018) - Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections

    F998-12(2018) - Standard Specification for Centrifugal Pump, Shipboard Use

    F1000-13(2019) - Standard Practice for Piping System Drawing Symbols

    F1003-19 - Standard Specification for Searchlights on Motor Lifeboats

    F1005-91(2019) - Standard Practice for HVAC Duct Shapes; Identification and Description of Design Configuration

    F1006-86(2018) - Standard Specification for Entrainment Separators for Use in Marine Piping Applications

    F1007-18 - Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application

    F1014-20 - Standard Specification for Flashlights on Vessels

    F1018-87a(2017) - Standard Specification for Steel Emergency Gear Stowage Locker

    F1019M-00(2018) - Standard Specification for Steel Deck Gear Stowage Box [Metric]

    F1020-86(2018) - Standard Specification for Line-Blind Valves for Marine Applications

    F1030-86(2018) - Standard Practice for Selection of Valve Operators

    F1043-18 - Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework

    F1068-90(2018) - Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use

    F1069-19 - Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use

    F1070-19 - Standard Specification for Doors, Non-Tight, for Marine Use

    F1071-94(2018) - Standard Specification for Expanded-Metal Bulkhead Panels

    F1072-94(2018) - Standard Specification for Expanded-Metal Doors

    F1073-19 - Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use

    F1074-87(2018) - Standard Specification for Cleats, Welded Horn Type

    F1075-97(2018) - Standard Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self-Contained

    F1076-19 - Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube

    F1083-18 - Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures

    F1085-19 - Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels

    F1092-19 - Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems

    F1097-17 - Standard Specification for Mortar, Refractory (High-Temperature, Air-Setting)

    F1098-87(2019) - Standard Specification for Envelope Dimensions for Butterfly Valves—NPS 2 to 24

    F1099M-18 - Standard Specification for Rat Guards, Ship’s (Metric)

    F1106-87(2018) - Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head)

    F1120-87(2019) - Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications

    F1121-87(2019) - Standard Specification for International Shore Connections for Marine Fire Applications

    F1122-04(2015)e1 - Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)

    F1123-87(2019) - Standard Specification for Non-Metallic Expansion Joints

    F1130-99(2020) - Standard Practice for Inspecting the Coating System of a Ship

    F1134-15(2019) - Standard Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators

    F1136/F1136M-11(2019) - Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners

    F1137/F1137M-19 - Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners

    F1138-98(2014) - Standard Specification for Spray Shields for Mechanical Joints

    F1139-88(2019) - Standard Specification for Steam Traps and Drains

    F1142-19 - Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight

    F1143-19 - Standard Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight

    F1144-19 - Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight, Hinged

    F1145-05(2017) - Standard Specification for Turnbuckles, Swaged, Welded, Forged

    F1155-10(2019) - Standard Practice for Selection and Application of Piping System Materials

    F1166-07(2013) - Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities

    F1172-88(2019) - Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type

    F1173-01(2018) - Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications

    F1178-11(2015) - Standard Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture

    F1179-88(2014) - Standard Practice for Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs

    F1182-07(2019) - Standard Specification for Anodes, Sacrificial Zinc Alloy

    F1183-96(2017) - Standard Specification for Aluminum Alloy Chain Link Fence Fabric

    F1184-16 - Standard Specification for Industrial and Commercial Horizontal Slide Gates

    F1196-19 - Standard Specification for Sliding Watertight Door Assemblies

    F1197-19 - Standard Specification for Sliding Watertight Door Control Systems

    F1198-92(2018)e1 - Standard Guide for Shipboard Fire Detection Systems

    F1199-88(2019) - Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum)

    F1200-88(2016) - Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F)

    F1201-88(2016) - Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F

    F1207M-12(2018) - Standard Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems [Metric]

    F1244-08(2018) - Standard Specification for Berths, Marine

    F1245-19 - Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard

    F1267-18 - Standard Specification for Metal, Expanded, Steel

    F1270-97(2019) - Standard Practice for Preparing and Locating Emergency Muster Lists

    F1271-90(2018) - Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications

    F1273-91(2013) - Standard Specification for Tank Vent Flame Arresters

    F1297-90(2018) - Standard Guide for Location and Instruction Symbols for Evacuation and Lifesaving Equipment

    F1298-90(2018) - Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications

    F1309-98(2018) - Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations

    F1311-90(2018) - Standard Specification for Large–Diameter Fabricated Carbon Steel Flanges

    F1312-19 - Standard Specification for Brick, Insulating, High Temperature, Fire Clay

    F1321-14 - Standard Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine the Light Ship Displacement and Centers of Gravity of a Vessel

    F1322-15 - Standard Guide for Selection of Shipboard Incinerators

    F1323-14(2020) - Standard Specification for Shipboard Incinerators

    F1330-91(2018) - Standard Guide for Metallic Abrasive Blasting to Descale the Interior of Pipe

    F1331-91(2017) - Standard Practice for Installation Procedures of Vinyl Deck Coverings on Portable Plates in Electrical and Electronic Spaces

    F1333-91(2019) - Standard Specification for Construction of Fire and Foam Station Cabinets

    F1337-10(2015) - Standard Practice for Human Systems Integration Program Requirements for Ships and Marine Systems, Equipment, and Facilities

    F1338-91(2019) - Standard Guide for Main Propulsion Medium Speed Marine Diesel Engines Covering Performance and Minimum Scope of Assembly

    F1345-10a(2019) - Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric

    F1347-91(2018) - Standard Specification for Manually Operated Fueling Hose Reels

    F1348/F1348M-91(2019) - Standard Specification for Pneumatic Rotary Descaling Machines

    F1370-92(2019)e1 - Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard

    F1379-95(2018) - Standard Terminology Relating to Barbed Tape

    F1385-07(2018) - Standard Practice for Platforms in Cargo Tanks

    F1386-92(2016)e1 - Standard Guide for Construction of Sounding Tube and Striker Plate for Tank Sounding

    F1387-19 - Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings

    F1428-92(2017) - Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners

    F1431-92(2016) - Standard Specification for Water Trap for Diesel Exhaust

    F1455-92(2017) - Standard Guide for Selection of Structural Details for Ship Construction

    F1470-19 - Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection

    F1476-07(2019) - Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications

    F1507-99(2017) - Standard Specification for Surge Suppressors for Shipboard Use

    F1508-96(2016)e1 - Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services

    F1510-07(2019) - Standard Specification for Rotary Positive Displacement Pumps, Ships Use

    F1511-18 - Standard Specification for Mechanical Seals for Shipboard Pump Applications

    F1546-96(2018) - Standard Specification for Fire Hose Nozzles

    F1548-01(2018) - Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications

    F1553-11(2017) - Standard Guide for Specifying Chain Link Fence

    F1554-18 - Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

    F1565-00(2019) - Standard Specification for Pressure-Reducing Valves for Steam Service

    F1567-94(2019) - Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers

    F1575-17 - Standard Test Method for Determining Bending Yield Moment of Nails

    F1664-08(2018) - Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence

    F1665-08(2018) - Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence

    F1667-18a - Standard Specification for Driven Fasteners: Nails, Spikes, and Staples

    F1669M-12(2018) - Standard Specification for Insulation Monitors for Shipboard Electrical Systems [Metric]

    F1685-00(2019) - Standard Specification for Pressure-Reducing Manifolds for Air or Nitrogen Systems

    F1716-96(2015) - Standard Guide for Transition and Performance of Marine Software Systems Maintenance

    F1718-01(2019) - Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps

    F1755M-96(2018) - Standard Specification for Solid State Bargraph Meters for Shipboard Use (Metric)

    F1757-96(2015) - Standard Guide for Digital Communication Protocols for Computerized Systems

    F1789-17a - Standard Terminology for F16 Mechanical Fasteners

    F1791-00(2019) - Standard Specification for Filters Used in Air or Nitrogen Systems

    F1792-97(2016)e1 - Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service

    F1793-97(2016)e1 - Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air or Nitrogen Service

    F1794-97(2016)e1 - Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas) and Hydraulic Systems

    F1795-00(2019) - Standard Specification for Pressure-Reducing Valves for Air or Nitrogen Systems

    F1799-97(2015) - Standard Guide for Shipboard Generated Waste Management Audits

    F1808-03(2019) - Standard Guide for Weight Control Technical Requirements for Surface Ships

    F1835-97(2018) - Standard Guide for Cable Splicing Installations

    F1836M-15(2019) - Standard Specification for Stuffing Tubes, Nylon, and Packing Assemblies (Metric)

    F1837M-97(2018) - Standard Specification for Heat-Shrink Cable Entry Seals (Metric)

    F1878-98(2015) - Standard Guide for Escort Vessel Evaluation and Selection

    F1883-20 - Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units

    F1908-08(2018) - Standard Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas

    F1910-98(2018) - Standard Specification for Long Barbed Tape Obstacles

    F1911-05(2019) - Standard Practice for Installation of Barbed Tape

    F1940-07a(2019) - Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners

    F1941/F1941M-16 - Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric

    F1985-99(2019)e1 - Standard Specification for Pneumatic-Operated, Globe-Style, Control Valves

    F1994-99(2019)e1 - Standard Test Method for Shipboard Fixed Foam Firefighting Systems

    F1999-14(2019) - Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems

    F2000-19 - Standard Safety Performance Specification for Fences for Baseball and Softball Fields

    F2001-15 - Standard Guide for Vessel-Related Technical Information for Use in Developing an Electronic Database and Ship Safety Record

    F2014-00(2019) - Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications

    F2015-00(2019) - Standard Specification for Lap Joint Flange Pipe End Applications

    F2016-00(2018) - Standard Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings

    F2017-15 - Standard Guide for Database Structure of Electronic Data Interchange Between Ship Owner and Shipyard for Contract Administration

    F2039-00(2018) - Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program

    F2044-09(2019)e1 - Standard Specification for Liquid Level Indicating Equipment, Electrical

    F2045-00(2018)e1 - Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic

    F2046-00(2017) - Standard Specification for Tachometers, Various

    F2049-11(2017) - Standard Safety Performance Specification for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas

    F2070-00(2017) - Standard Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic

    F2071-00(2017) - Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic

    F2087-13(2019) - Standard Specification for Packing, Fiberglass, Braided, Rope, and Wick

    F2094/F2094M-18a - Standard Specification for Silicon Nitride Bearing Balls

    F2154-13(2019) - Standard Specification for Sound-Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced

    F2162-01(2016) - Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type

    F2163-01(2016) - Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring

    F2168-13(2019) - Standard Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring

    F2191/F2191M-13(2020)e1 - Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn

    F2192-05(2017) - Standard Test Method for Determining and Reporting the Berthing Energy and Reaction of Marine Fenders

    F2200-20 - Standard Specification for Automated Vehicular Gate Construction

    F2215-15 - Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications

    F2218-02(2015) - Standard Guide for Hardware Implementation for Computerized Systems

    F2246-06(2013) - Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage

    F2281-04(2017) - Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications

    F2282-18 - Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners

    F2283-12(2018) - Standard Specification for Shipboard Oil Pollution Abatement System

    F2328-17 - Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts

    F2328M-17 - Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric)

    F2329/F2329M-15 - Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners

    F2332-06(2013) - Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components

    F2361-18 - Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower

    F2362-03(2019) - Standard Specification for Temperature Monitoring Equipment

    F2363/F2363M-17 - Standard Specification for Sewage and Graywater Flow Through Treatment Systems

    F2408-16 - Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets

    F2409-10(2016) - Standard Guide for Fences for Non-Residential Outdoor Swimming Pools, Hot Tubs, and Spas

    F2430-04(2018) - Standard Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race)

    F2431-04(2018) - Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring

    F2437/F2437M-17 - Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs

    F2443-04(2012) - Standard Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End

    F2444-04(2018) - Standard Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques

    F2446-04(2018) - Standard Classification for Hierarchy of Equipment Identifiers and Boundaries for Reliability, Availability, and Maintainability (RAM) Performance Data Exchange

    F2453/F2453M-14(2019) - Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.2  [3871 mm2] or Less, in Panels or Rolls, with Uniform Meshes

    F2482-08(2015) - Standard Specification for Load-Indicating Externally Threaded Fasteners

    F2488-05(2013) - Standard Terminology for Rolling Element Bearings

    F2489-06(2013) - Standard Guide for Instrument and Precision Bearing Lubricants—Part 2 Greases

    F2511-05(2013) - Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid

    F2548-20 - Standard Specification for Expanded Metal Fence Systems for Security Purposes

    F2589-16 - Standard Specification for Ornamental Fences Employing Steel Tubular Pickets

    F2590-06(2013) - Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type

    F2591-06(2013) - Standard Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series)

    F2611-15 - Standard Guide for Design and Construction of Chain Link Security Fencing

    F2630-14 - Standard Guide for Self-Closing/Self-Latching General-Purpose Gates

    F2660-20 - Standard Test Method for Qualifying Coatings for Use on F3125 Grade A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement

    F2661-07(2015) - Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer

    F2698-08(2018) - Standard Guide for Fences for Above-Ground and In-ground Skate Park Facilities

    F2699-08(2018) - Standard Guide for Fences for Commercial and Public Outdoor Water Spray/Play Areas

    F2730/F2730M-18a - Standard Specification for Silicon Nitride Cylindrical Bearing Rollers

    F2780-20 - Standard Guide for Design and Construction of Expanded Metal Security Fences and Barriers

    F2781-15 - Standard Practice for Testing Forced Entry, Ballistic and Low Impact Resistance of Security Fence Systems

    F2798-09(2018) - Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications

    F2814-09(2015) - Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes

    F2832-11(2016) - Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners

    F2833-11(2017) - Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type

    F2876-10(2015) - Standard Practice for Thermal Rating and Installation of Internal Combustion Engine Packages for use in Hazardous Locations in Marine Applications

    F2877/F2877M-13(2019) - Standard Test Method for Shock Testing of Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum

    F2882/F2882M-17 - Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi and 1170 MPa Minimum Tensile Strength (Inch and Metric)

    F2919/F2919M-12(2018) - Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.2 [3871 mm2] in Panels

    F2934-12(2018) - Standard Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications

    F2935-12(2018)e1 - Standard Specification for Chocks, Panama, Mooring Cast Steel

    F2936-12(2018)e1 - Standard Specification for Chocks, Ship Mooring, Cast Steel

    F2953-12 - Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages

    F2957-13(2019)e1 - Standard Specification for Ornamental Aluminum Fence Systems

    F2991-13 - Standard Guide for Doubler Plate Repairs for Non-Classed Ship Structures

    F3000/F3000M-13(2018) - Standard Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats

    F3019/F3019M-19 - Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners

    F3040/F3040M-13(2018) - Standard Test Method for Mechanical Static Load Testing of Non-Structural Marine Joiner Bulkheads

    F3042-13(2018) - Standard Specification for Nonferrous Hex Socket, Slotted Headless, and Square Head Set Screws

    F3043-15 - Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength

    F3052-14(2020)e1 - Standard Guide for Conducting Small Boat Stability Test (Deadweight Survey and Air Inclining Experiment) to Determine Lightcraft Weight and Centers of Gravity of a Small Craft

    F3059-18 - Standard Specification for Fiber-Reinforced Polymer (FRP) Gratings Used in Marine Construction and Shipbuilding

    F3111-16 - Standard Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength

    F3125/F3125M-19 - Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength

    F3131-14 - Standard Specification for Epoxy / Cotton Raw Materials for the Use in Bearing Cages

    F3148-17a - Standard Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions

    F3151-17 - Standard Specification for Driven Steel Post Drive Anchor System

    F3204-16 - Standard Guide for Design and Construction of Welded Wire Fence Systems for Security Purposes

    F3226/F3226M-19 - Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems

    F3256-17 - Standard Guide for Reporting and Recording of Near-Misses for Maritime Industry

    F3257-17 - Standard Guide for Design, Construction, and Operation of Vessels Providing Accommodation Service to Offshore Installations

    F3284-18 - Standard Guide for Recording and Reporting of Injuries and Illnesses for the Maritime Industry

    F3285-18 - Standard Guide for Installation and Application of Type C Portable Tanks for Marine LNG Service

    F3286-17 - Standard Guide for Cybersecurity and Cyberattack Mitigation

    F3312/F3312M-18 - Standard Practice for Liquefied Natural Gas (LNG) Bunkering Hose Transfer Assembly

    F3329-18 - Standard Specification for Carbon and Alloy Steel Metric Rivets

    F3342-19 - Standard Guide for Temporary Fence Applications for Construction Sites

    F3353-19 - Standard Guide for Shipboard Use of Lithium-Ion (Li-ion) Batteries

    F3359-19 - Standard Test Method for Determining Bending Yield Moment of Staples

    F3386/F3386M-20 - Standard Specification for Detonation Flame Arresters

    F3394/F3394M-20 - Standard Specification for Hardened Steel Backup and Reaction Washers Inch and Metric Dimensions

    F3449-20 - Standard Guide for Inclusion of Cyber Risks into Maritime Safety Management Systems in Accordance with IMO Resolution MSC.428(98)―Cyber Risks and Challenges