Concrete and Aggregates

    A New Unbonded Capping Practice for Evaluating the Compressive Strength of Controlled Low-Strength Material Cylinders

    A New Test Method for Fiber-Reinforced Concrete

    Mechanical Properties and Freezing and Thawing Durability of Polypropylene Fiber-Reinforced Shotcrete Incorporating Silica Fume and High Volumes of Fly Ash

    Delayed Ettringite Formation (DEF) in Structural Lightweight Aggregate Concrete: Effect of Curing Temperature, Moisture, and Silica Fume Content

    Correlation Between Materials Finer Than No. 200 Sieve and Sand Equivalent Tests for Natural and Crushed Stone Sands

    Effect of Elastic Modulus of Capping Material on Measured Strength of High-Strength Concrete Cylinders

    Two-Hour Zero Slump Loss, High-Strength Pumpable Concrete—An Application Case in Dam Structure

    Modified Slump Test to Measure Rheological Parameters of Fresh Concrete

    Effects of Superplasticizer, Retarding Agent, and Silica Fume on the Air Permeability of High-Performance Concrete

    A Statistical Analysis of Hot and Warm Accelerated Concrete Curing Methods

    Ultrasonic Testing to Determine Water-Cement Ratio for Freshly Mixed Concrete

    Rheology of Cement Paste and Concrete

    A Systematic Method to Determine Optimal Specimen Geometry for Measuring Concrete Fracture Properties by the Peak-Load Method

    Standards for Fracture Toughness Testing of Rock and Manufactured Ceramics: What Can We Learn for Concrete?

    Do We Need a Standard Concrete Fracture Mechanics Test?

    Introduction to Symposium on Concrete Fracture Mechanics Standards

    An Overview of the Fracture Mechanics of Concrete

    The Role for Fracture Mechanics in Reinforced Concrete Design

    Durability of Reinforced Lightweight Mortars with Corrosion Inhibitors

    Performance and Correlation of the Properties of Fly Ash Cement Concrete

    Tensile and Compressive Strength of Silica Fume-Cement Pastes and Mortars

    Precision of Tests for Assessment of the Deicer Salt Scaling Resistance of Concrete

    Mechanical Properties of Normal to High-Strength Steel Fiber-Reinforced Concrete

    Factors Influencing Flow and Strength of Standard Mortars and Reappraisal of ASTM Test Methods for Fly Ash

    Break-Off Test for High-Strength Concrete

    The Use of the Flow Length Concept to Assess the Efficiency of Air Entrainment with Regards to Frost Durability: Part I—Description of the Test Method

    The Use of the Flow Length Concept to Assess the Efficiency of Air Entrainment with Regards to Frost Durability: Part II—Experimental Results

    Comparison of Five Standards on Ultrasonic Pulse Velocity Testing of Concrete

    Improving Initial Strength of a Concrete made with Type 20M Cement

    Monitoring the Influence of Water and Ionic Ingress on Cover-Zone Concrete Subjected to Repeated Absorption

    Selectivity of Alkaline Activators for the Activation of Slags

    Quantitative Petrographic Evaluation of Fine Aggregate

    Crushed Tile Coarse Aggregate Concrete

    High-Strength Concrete Properties Derived from Compressive Strength Values

    The Passivation of Reinforcing Steel Exposed to Synthetic Pore Solution and the Effect of Calcium-Nitrite Inhibitor

    Survey of North American Portland Cements: 1994

    Introduction to Symposium on Polymer-Modified Concrete and Mortars: Building on the Past and Moving into the Future

    Curing Stresses in Polymer-Modified Repair Mortars

    A Latex-Modified Concrete Overlay on Plain-Jointed Concrete Pavement

    Self-Smoothing Industrial Floors

    Properties of a Non-Film Forming Latex in Ceramic Tile Mortar

    Acrylic Powder Modified Portland Cement

    Comparison of Liquid Dispersions with Spray-Dried Acrylic Polymers as Modifiers of a Cement-Based Patching Material

    Setting Times of Fly Ash and Slag-Cement Concretes as Affected by Curing Temperature

    Why the Accelerated Mortar Bar Method ASTM C 1260 is Reliable for Evaluating the Effectiveness of Supplementary Cementing Materials in Suppressing Expansion Due to Alkali-Silica Reactivity

    Limitations of the Carbonate Extraction/UV Spectrophotometric Method for Determining Lignosulfonate-Based Admixtures in Hardened Concrete

    Results of an Interlaboratory Test Program: Compressive Strength of Concrete

    Determination of a Nitrite-Based Corrosion Inhibitor in Plastic and Hardened Concrete

    Determination of Slag and Pulverized Fuel Ash in Hardened Concrete—The Method of Last Resort Revisited

    Determination of Blast-Furnace Slag Content in Hardened Concrete by Electrical Conductivity Methods

    A New Consecutive Dissolution Method for the Analysis of Slag Cements

    Determination of Silica-Fume Content in Hardened Concrete by AC Impedance Spectroscopy

    Crack Counts in Air-Entrained and Non-Air-Entrained Concrete Subjected to Accelerated and Fog-Room Curing

    Optimization of the Composition of a High-Performance Concrete

    Determination of Water Content of Fresh Concrete Using a Microwave Oven

    The Effects of Different Cementing Materials and Curing on Concrete Scaling

    The Influence of Size and Hardness of Sand Particles and Their Proportions on the Friction Characteristics of Cement Mortars: A Laboratory Study

    The Effect of Mold Size and Mold Material on Compressive Strength Measurement Using Concrete Cylinders

    Effect of Capping Materials and Procedures on the Measured Compressive Strength of High-Strength Concrete

    Effect of Elevated Curing Temperature on the Chloride Permeability of High-Strength Lightweight Concrete

    Use of Dynamic Nondestructive Test Methods to Monitor Concrete Deterioration Due to Alkali-Silica Reaction

    A Rapid Method for Measuring the Acid-Soluble Chloride Content of Powdered Concrete Samples

    Effects of Testing Rate and Age on ASTM C 1018 Toughness Parameters and their Precision for Steel Fiber-Reinforced Concrete

    Evaluation of Cylinder Size and Capping Method in Compression Strength Testing of Concrete

    Evaluation of Granulated Blast Furnace Slag as a Cementitious Admixture—A Case Study

    Task Force Report on ASTM D 2419: Sand Equivalent Value of Soils and Fine Aggregate, Prepared for ASTM Subcommittee D 04.51

    Toughness Behavior of Fiber-Reinforced Rapid-Set Materials: A Preliminary Study

    Properties of Zeolite as an Air-Entraining Agent in Cellular Concrete

    Development of a New Method for the Determination of Iron Content of Hydraulic Cementitious Materials and Pozzolans

    Sludge Ash Pellets as Coarse Aggregates in Concrete

    Are Small Aggregates Really Better for Making High-Strength Concrete?

    Static Modulus of Elasticity of High-Strength Concrete from Pulse Velocity Tests

    Properties of High-Strength Concrete Containing Light-, Normal-, and Heavyweight Aggregate

    Evaluation of Concrete Mixtures for Underwater Pile Repairs

    Microstructural Development in a High-Strength Concrete Containing a Ternary Cementitious System

    Improvement of Concrete Strength Statistical Control

    Results of an Interlaboratory Concrete Testing Program: Part I

    Corrosion of Reinforcing Steel in Concrete Containing Slag or Pozzolans

    Synergistic Roles of Slag and Silica Fume in Very High-Strength Concrete

    Practical Considerations Pertaining to the Microscopical Determination of Air Void Characteristics of Hardened Concrete (ASTM C 457 Standard)

    A Method for Proportioning High-Strength Concrete Mixtures

    Laboratory Evaluation of Wet and Dry Abrasion Resistance of Cement Mortar

    Determination of Concrete Strength by Nondestructive Methods

    High-Strength and Flowing Concrete with a Zeolitic Mineral Admixture

    Principles Underlying Production of High-Performance Concrete

    The Effect of Mix Design on the Properties of Sulfur Concrete

    Mechanical Properties, Abrasion Resistance, and Chloride Permeability of Concrete Incorporating Granulated Blast-Furnace Slag

    Testing and Evaluation of a Novel Melamine-Based Superplasticizer in Concrete

    Effects on Flexural Performance of Sawing Plain Concrete and of Sawing and Other Methods of Altering the Degree of Fiber Alignment in Fiber-Reinforced Concrete

    Behavior of Cement-Reduced and “Flowing” Fresh Concretes Containing Conventional Water-Reducing and “Second-Generation” High-Range Water-Reducing Admixtures

    Evaluation of Test Methods for Measuring the Bond Strength of Portland Cement Based Repair Materials to Concrete

    On Testing of Very Short Concrete Specimens

    Durability of Concrete under Simulated Arctic Conditions

    Another Look at the Portland Cement/Chemical Admixture Incompatibility Problem

    Freeze-Thaw Testing of Coarse Aggregate in Concrete: Procedures Used by Michigan Department of Transportation and Other Agencies

    Some Recent Problems with Air-Entrained Concrete

    Na2SO4 Soundness Test Evaluation

    Statistical Characteristics of New Pin Penetration Test

    Effect of Different Admixtures on the Strength of Sulphur Concrete

    Modification of the X-Radiography Technique to Include a Contrast Agent for Identifying and Studying Microcracking in Concrete

    Abrasion Resistance of Surface-Treated Concrete

    Analytical Investigation of the Influence of Air Bubble Size on the Determination of the Air Content of Freshly Mixed Concrete

    Effect of Air-Entraining Agent on Air-Void Parameters of Low- and High-Calcium Fly Ash Concretes

    Test Methods for Rapid-Hardening Magnesium Phosphate-Based Cements

    Limestone Additions to Portland Cement—An Old Controversy Revisited

    Use of Ultrasonic Pulse Velocity for Fracture Testing of Cemented Materials

    New Approach for a Concrete Scaling Test Based on Field Conditions

    Creep of Lightweight Aggregate Concrete Under Variable Stresses

    Production and Evaluation of a New Source of Granulated Blast Furnace Slag

    Concrete Incorporating High Volumes of ASTM Class F Fly Ash

    Freeze-Thaw Durability of Wet-Mix and Dry-Mix Shotcretes with Silica Fume and Steel Fibres

    Mechanical Properties and Workability of Superplasticized Concrete

    The Inhibition of Chloride-Induced Corrosion in Reinforced Concrete by Calcium Nitrite

    Factors Affecting the Reactivity of Fly Ash from Western Coals

    Effect of Chemical Admixtures on Portland Cement Hydration

    Comparison of Slump Cone and V-B Tests as Measures of Workability for Fiber-Reinforced and Plain Concrete

    High-Strength Semi-Lightweight Concrete with Up to 50% Fly Ash by Weight of Cement

    Significance of Interrupted Testing on the Freeze-Thaw Resistance of Fly Ash Concrete by ASTM C 666 (Method A)

    The Rate of Absorption of Aggregates

    Comparative Study of the Microstructures of Normal and Very High-Strength Concretes

    Mechanical Properties and Freezing and Thawing Resistance of High-Strength Concrete Incorporating Silica Fume

    An Experiment to Investigate Chloride Intrusion on Construction Joints in Concrete

    Cost-Effective Control of Concrete Quality Using Small Specimens of Mortar Extracted from Concrete

    Shrinkage and Creep of Concrete Containing 50% Lignite Fly Ash at High Temperatures

    Evaluation of the Potential for Expansion and Cracking of Concrete Caused by the Alkali-Carbonate Reaction

    Fracture of Concrete Subjected to Impact Loading

    Properties of High-Strength Concrete

    A New Statistical Method for Prediction of Concrete Strength from In-Place Tests

    The Application of Neutron Radiography to the Study of Microcracking in Concrete

    Some Laboratory Experiments on the Inhibitor Effect of Sodium Nitrite on Reinforcement Corrosion

    Determining the Static and Dynamic Properties of Hardened Normal Weight and Heavy Weight Concrete

    Chloride Concentrations in Concrete Pore Solutions Resulting from Calcium and Sodium Chloride Admixtures

    Influence of Air Temperature on the Setting of Concrete Containing Set Retarding Admixtures

    Fatigue Behavior of Superplasticized Concrete

    Neoprene Pads for Capping Concrete Cylinders

    Application of CCRL Data in the Formulation of Precision Estimates for Selected Cement Standards

    Mechanism of Pozzolanic Reactions and Control of Alkali-Aggregate Expansion

    Assessing Fire Damage of Concrete by the Ultrasonic Pulse Technique

    Nondestructive Combined Methods Applied to Structural Concrete Members

    Chloride Permeability Versus Air Content of Latex Modified Concrete

    Recycled Concrete—A Source for New Aggregate

    Trinity Square: Commentary on Concrete Test Data

    Resistance to Freezing and Thawing of Silica Fume Concrete

    Factors Affecting the Durability of Concrete and the Benefits of Using Blast-Furnace Slag Cement

    Soundness Testing and Durability of Coarse Aggregates in Concrete

    Studies of the Hydraulic Properties of Belite Middling Slime

    The Uniformity and Influence of Silica Fume from a U.S. Source on the Properties of Portland Cement Concrete

    Experimental Examination of Fly Ash Concrete

    A Rockwell Hardness Test for Concrete

    The Maturity Method: Theory and Application

    Measures of the Workability of Steel Fiber Reinforced Concrete and Their Precision

    Influence of Petrography of Argillaceous Carbonates on Their Frost Resistance in Concrete

    On In-Place Strength of Concrete and Pullout Tests

    Microcracking and Definition of Failure of High- and Normal-Strength Concretes

    Lithological Characteristics of Concrete Aggregates as Related to Durability

    Variation of Laboratory Concrete Flexural Strength Tests

    A Method for Analyzing Void Distribution in Air-Entrained Concrete

    Alkali Reactivity of Strained Quartz as a Constituent of Concrete Aggregate

    Production Technology of Expanded Clay Aggregate Gravel with Bulk Density Below 300 kg/m3

    Effects of Initial Field Curing on Standard 28-Day Cylinder Strengths

    Efficient Large Panel Roofing

    Chloride Penetration and the Deterioration of Concrete Bridge Decks

    Evaluation of Selected Procedures for the Rapid Analysis of Fresh Concrete

    On the Correlation of Consistency and Strength of Concrete to the Attrition Rate of Fine Aggregate

    On the Correlation of Strength and Elasticity of Concrete to Los Angeles Abrasion Loss and Crushing Value of Indonesian River Gravels

    Effect of Different Types of Crushers on Shape and Roughness of Aggregates

    A Strain Control System for Relaxation Studies of Concrete

    Mechanical Properties and Freezing and Thawing Resistance of Non-Air-Entrained, Air-Entrained, and Air-Entrained Superplasticized Concrete Using ASTM Test C 666, Procedures A and B

    Ideal and Quasi-Ideal Grading of Coarse and Fine Aggregates for Mass Concrete

    Development and Interaction of a Concrete Additive for Improved Performance and Durability

    Definition and Measurement of Flexural Toughness Parameters for Fiber Reinforced Concrete

    Precision of Flexural Strength and Toughness Parameters for Steel Fiber Reinforced Concrete

    A Critical Look at ASTM C 618 and C 311

    Development of a Conductivity Probe to Monitor Setting Time and Moisture Movement in Concrete

    Development of High-Strength Concrete Incorporating a Large Percentage of Fly Ash and Superplasticizers

    Variability and Control of Class C Fly Ash

    Durability Performance of Polymer-Modified Mortars

    Thermally Destructive Particles in Sound Dolostone Aggregate from an Ontario Quarry

    Relative Resistance of Rained-On Concrete Pavements to Abrasion, Skidding, and Scaling

    An Experimental Technique for Obtaining Complete Stress-Strain Curves for High Strength Concrete

    Investigation of ASTM Paste and Mortar Bleeding Tests

    Proportioning of Coarse Aggregate for Conventionally and Gap-Graded Concrete

    The Action and Application of Two New ASTM Specifications for Shrinkage-Compensating Cement in Concrete: ASTM C 845 and C 878

    Evaluation for Durability and Strength Development of a Ground Granulated Blast Furnace Slag

    Condition of Concrete in Martin Dam After 50 Years of Service

    Influence of Pozzolanic, Slag, and Chemical Admixtures on Pore Size Distribution and Permeability of Hardened Cement Pastes

    Attack of Aggressive Fluids

    Production of Artificial Porous Aggregates from Fuel-Containing Industrial Wastes in the USSR

    Inertial Effects in the Instrumented Impact Testing of Cementitious Composites

    Flexural Fatigue of Polymer Concrete

    Use of the Maleic Acid Method for the Determination of Cement Content of Concrete

    Abrasion-Erosion Resistance of Fiber-Reinforced Concrete

    Effect of Mixing Temperature on Slump Loss and Setting Time of Concrete Containing High-Range Water Reducers

    An Analytical Approach to Gap-Graded Concrete

    High-Strength Concrete: An Annotated Bibliography 1930–1979

    Air Content of Hardened Concrete from Comparison Electron Microscope Photographs

    Roughness of Aggregates of Different Types by the Modified Fourier Method and Scanning Electron Microscopy

    Formula for Calculating Spacing Factor for Entrained Air Voids

    Concrete Polymer Materials as Alternative Construction Materials for Geothermal Applications—Field Evaluations

    Pigments for Integrally Colored Concrete

    A Method for the Determination of Consistency and Consistency Retention (Board Life) of Masonry Mortars

    Methods and Equipment Used in Preparing and Examining Fluorescent Ultrathin Sections of Portland Cement Concrete

    The Precision of the Microscopical Determination of the Air-Void System in Hardened Concrete

    Use of Superplasticizers as Water Reducers

    The Electrical Resistivity of Concrete with Emphasis on the Use of Electrical Resistance for Measuring Moisture Content

    Effect of Length/Diameter Ratio on Compressive Strength of Drilled Concrete Core—A Semi-Rational Approach

    The Analysis of Interlaboratory Test Data

    Ruggedness Evaluation of Test Procedures

    Establishing Specification Limits for Materials

    Precision Statements Without an Interlaboratory Test Program