You are being redirected because this document is part of your ASTM Compass® subscription.
    This document is part of your ASTM Compass® subscription.


    A New Model to Predict the Oxidation Kinetics of Zirconium Alloys in a Pressurized Water Reactor

    Published: 0

      Format Pages Price  
    PDF (2.4M) 25 $25   ADD TO CART
    Complete Source PDF (69M) 810 $172   ADD TO CART


    The previous CEA corrosion code COCHISE provided satisfactory simulations of in-reactor corrosion of the fuel cladding when used in its validity range. In contrast, it could lead to hazardous predictions if applied out of this range due to the strongly linked parameters mainly based on the analysis of French pressurized water reactor (PWR) data. To predict the oxidation kinetics for new operating conditions or new materials, the CEA and EDF decided to develop a new model, named CORCY, which is based on a more phenomenological approach and uses separate parameters deduced from analytical experiments. The aim of this paper is to present the new model for Zircaloy-4 in PWR. The phenomenological approach is described. It is based on out- and in-pile data. Typically, since (1) the oxidation kinetics of zirconium alloys in autoclave are periodic, and (2) the oxide films formed in autoclave, in out-of-pile loop, and in-reactor all exhibit periodic lateral cracks with a period similar to the oxide thickness to transition, the oxidation kinetics in CORCY are characterized by a cyclic repetition of semi-parabolic law. Each model parameter is detailed. They are deduced separately from (a) oxidation tests performed in autoclave on fresh alloys to determine their kinetics; (b) oxidation tests performed in the out-of-pile corrosion loops Corail and Reggae to quantify the effects of thermo-hydraulic conditions; (c) data provided by Testing Material Reactors (OSIRIS and Halden reactor) during isothermal oxidation to determine the effects of irradiation; and (d) oxidation tests performed on pre-hydrided alloys to take into account the accelerated corrosion phase occurring, in reactor, for Zircaloy-4 at high burn-up. After describing both the phenomenological approach and the different model parameters, a comparison of measured and calculated corrosion data from French PWRs at a burn-up up to 65 GWd/tU is provided.


    Zr alloys, low tin Zircaloy-4, corrosion modeling, cyclic behavior, oxide stratification, heat flux, neutron flux, hydrides

    Author Information:

    Bouineau, V.
    CEA-DEN, DEC-SA3C, CEA/Cadarache, Saint-Paul-Lez-Durance Cedex,

    Ambard, A.
    EDF R&D MMC site des Renardières, av. des Renardières — Ecuelles, Moret/Loing Cedex,

    Bénier, G.
    CEA-DEN, DEC-SA3C, CEA/Cadarache, Saint-Paul-Lez-Durance Cedex,

    Pêcheur, D.
    CEA-DEN, DEC-SA3C, CEA/Cadarache, Saint-Paul-Lez-Durance Cedex,

    Godlewski, J.
    CEA-DEN, DTN-STRI, CEA/Cadarache, Saint-Paul-Lez-Durance Cedex,

    Fayette, L.
    CEA-DEN, DEC-SA3C, CEA/Cadarache, Saint-Paul-Lez-Durance Cedex,

    Duverneix, T.
    CEA-DEN, DEC-SA3C, CEA/Cadarache, Saint-Paul-Lez-Durance Cedex,

    Committee/Subcommittee: B10.02

    DOI: 10.1520/STP48147S