You are being redirected because this document is part of your ASTM Compass® subscription.
    This document is part of your ASTM Compass® subscription.


    J Integral Estimation Procedures

    Published: 0

      Format Pages Price  
    PDF (456K) 30 $25   ADD TO CART
    Complete Source PDF (4.1M) 197 $61   ADD TO CART


    By making use of plastically adjusted linear elastic fracture mechanics analysis and plastic limit load solutions, a method is developed for reasonable approximation of Rice's path independent J integral which is applicable for test specimens or other configurations which exhibit considerable plasticity prior to fracture. Employing this, J is expressed as a function of load point displacement. Estimations of the J versus displacement relationships developed compared quite well to those previously established experimentally at Westinghouse Research Laboratories for Ni-Cr-Mo-V and A533B steels. For these comparisons, the test specimen configurations considered were three point bend, center notch, and compact tension test specimen configurations, all of which exhibit significantly different plastic limit load slip line flow fields. Thus, the method developed for approximating J is thought to be widely applicable.


    fracture (materials), fracture strength, toughness, loads (forces), tensile properties, plastic analysis, stressing, cracking (fracturing), elastic limit, plastic limit, tension tests, fracture tests, alloy steels

    Author Information:

    Bucci, RJ
    Del Research Corporation, Hellertown, Pa.

    Paris, PC
    Del Research Corporation, Hellertown, Pa.

    Landes, JD
    Research and Development Center, Westinghouse Electric Corporation, Pittsburgh, Pa.

    Rice, JR
    Brown University, Providence, R.I.

    Committee/Subcommittee: E08.08

    DOI: 10.1520/STP38818S