You are being redirected because this document is part of your ASTM Compass® subscription.
    This document is part of your ASTM Compass® subscription.


    Tests and Analyses for Fully Plastic Fracture Mechanics of Plane Strain Mode I Crack Growth

    Published: 0

      Format Pages Price  
    PDF (476K) 24 $25   ADD TO CART
    Complete Source PDF (17M) 834 $109   ADD TO CART


    Under monotonic loading, structures should ideally be ductile enough to provide continued resistance during crack growth. Such fully plastic behavior is of interest in design against collisions, tank car accidents, earthquakes, and ship groundings. For fully plastic crack growth in low strength alloys, existing asymptotic solutions for elastic-plastic growing cracks are not applicable because they reach the fracture strain only in regions small compared to the inhomogeneities of the actual fracture process.

    For the limiting case of non-hardening fully-plastic plane strain crack growth, in a number of geometries and loadings the near-tip fields are characterized in terms of three parameters: an effective angle 2θs between a pair of slip planes, and the normal stress σs and the increment of displacement δus across the planes. This three-parameter characterization is in contrast to the one- or two-parameter (K or J and T or Q) characterization in linear or non-linear elastic fracture mechanics. These θs, σs, and δus parameters are found from the far-field geometries and loadings through slip line fields or least upper bound analyses based on circular arcs. The resulting crack growth, in terms of the crack tip opening angle (CTOA), is a function of θs, σs and the material. The geometry of the crack growing between two moving slip planes emanating from its tip reduces this function to the critical fracture shear strain left behind the slip planes, γf, as a function of σs, γf(σs) is found theoretically from a hole initiation and growth model. It is also found from preliminary fully plastic crack growth experiments on unequally grooved specimens with fixed-grip extension or 4-point bending of a 1018 CF steel. At high triaxialities and also after strain aging, cleavage intervened abruptly, even during stable, slow deformation.


    fracture mechanics, crack growth, Mode I, plane strain, fully plastic, non-hardening, ductile, strain aging, cleavage, CTOA, analysis, experiments

    Author Information:

    McClintock, FA
    Professor Emeritus and Professor, Massachusetts Institute of Technology, Cambridge, MA

    Kim, Y-J
    Institute of Materials Research, GKSS Research Centre, Geesthacht,

    Parks, DM
    Professor Emeritus and Professor, Massachusetts Institute of Technology, Cambridge, MA

    Committee/Subcommittee: E08.08

    DOI: 10.1520/STP16385S