You are being redirected because this document is part of your ASTM Compass® subscription.
    This document is part of your ASTM Compass® subscription.

    If you are an ASTM Compass Subscriber and this document is part of your subscription, you can access it for free at ASTM Compass
    Volume 50, Issue 1 (June 2021)

    Study of the Required Directional Color Contour Option for the Controlled Weave Application in the Jacquard Graph Designing

    (Received 30 January 2021; accepted 27 April 2021)

    Published Online: 11 June 2021

    CODEN: JTEVAB

      Format Pages Price  
    PDF (1.89 MB) 12 $25   ADD TO CART

    Cite this document

    X Add email address send
    X
      .RIS For RefWorks, EndNote, ProCite, Reference Manager, Zoteo, and many others.   .DOCX For Microsoft Word



    Abstract

    The jacquard graph designers need to edit the motif outline perfectly as per the required shape. Then the designer has to retain the perfection of the edited boundary by the controlled application of binding weave marks. In this study, the possibility of using the “required directional color contour option” for controlled/restricted application of binding weaves in jacquard graph designing to get a perfect boundary of figure and ground is explored. The necessity of controlled application of binding weave marks required for extra warp, extra weft, and single cloth figured graph designing is noted. The presently used “all directional color contour option” is studied. The required directional color contour option available in the Arahpaint software is analyzed. The steps involved in using the “required directional color contour option” with the “brush option” for the application of binding weaves are explored. It is noted that all directional color contour option is an indirect methodology, whereas required directional color contour option is a direct methodology. It is observed that the systematic use of the required directional color contour option restricts the application of binding weave marks only in the essential places and avoids it in the nonrequired edges and corners of figure and ground portions of the graph design. By this, the edited design boundary is maintained without any distortion in shape even after the application of binding weave marks. It enables for flawless application of binding weave for the smallest and intricate figured extra warp, extra weft, and single cloth figured graph designs.

    Author Information:

    Panneerselvam, R. G.
    Department of Fashion Technology, KCG College of Technology, Chennai, Tamil Nadu

    Prakash, C.
    Department of Handloom and Textiles, Indian Institute of Handloom Technology, Govt. of India, Ministry of Textiles, Nadia, West Bengal


    Stock #: JTE20210069

    ISSN:0090-3973

    DOI: 10.1520/JTE20210069

    Author
    Title Study of the Required Directional Color Contour Option for the Controlled Weave Application in the Jacquard Graph Designing
    Symposium ,
    Committee E12