You are being redirected because this document is part of your ASTM Compass® subscription.
    This document is part of your ASTM Compass® subscription.

    If you are an ASTM Compass Subscriber and this document is part of your subscription, you can access it for free at ASTM Compass
    Volume 49, Issue 6 (April 2021)

    Uncertainty of Elastoplastic Material Parameters Calculated from the Spherical Indentation in the Macro Range

    (Received 25 June 2020; accepted 28 December 2020)

    Published Online: 02 April 2021

    CODEN: JTEVAB

      Format Pages Price  
    PDF (684.54 KB) 17 $25   ADD TO CART

    Cite this document

    X Add email address send
    X
      .RIS For RefWorks, EndNote, ProCite, Reference Manager, Zoteo, and many others.   .DOCX For Microsoft Word



    Abstract

    The applicability of three methods developed by finite element method (FEM) and proposed in the literature are studied on steel S355. Instrumented indentation tests using spherical indenters of radius 200 and 500 µm are performed in the macro range at depths of more than 6 µm. The results of the selected methods are compared with the tensile test. To evaluate the partially strongly varying results, the uncertainties of the calculated strain hardening exponent, n, and yield stress, Y, are estimated. Recommendations for an appropriated procedure of the indentation test are given. The machine compliance and the determination of the zero point of depth play an essential role. If the certain conditions are considered, the instrumented indentation tests can be used, in particular for investigations of specimens with inhomogeneous elastoplasticity.

    Author Information:

    Ullner, Christian
    Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin,

    Subaric-Leitis, Andreas
    Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin,

    Bartholmai, Matthias
    Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin,


    Stock #: JTE20200683

    ISSN:0090-3973

    DOI: 10.1520/JTE20200683

    Author
    Title Uncertainty of Elastoplastic Material Parameters Calculated from the Spherical Indentation in the Macro Range
    Symposium ,
    Committee E28