You are being redirected because this document is part of your ASTM Compass® subscription.
    This document is part of your ASTM Compass® subscription.

    If you are an ASTM Compass Subscriber and this document is part of your subscription, you can access it for free at ASTM Compass
    Volume 50, Issue 1 (June 2021)

    New Approach to Determine Standard Deviation and Precision Estimates for ASTM D4867/D4867M and AASHTO T283

    (Received 29 October 2020; accepted 19 April 2021)

    Published Online: 11 June 2021

    CODEN: JTEVAB

      Format Pages Price  
    PDF (2.09 MB) 14 $25   ADD TO CART

    Cite this document

    X Add email address send
    X
      .RIS For RefWorks, EndNote, ProCite, Reference Manager, Zoteo, and many others.   .DOCX For Microsoft Word



    Abstract

    Moisture damage in asphalt pavements can be attributed to the incompatibility of the asphalt binder, aggregate, or the interaction of the asphalt binder and aggregate. Moisture damage can accelerate pavement distresses such as cracking and rutting. The most widely used test methods by state highway agencies are AASHTO T283-14, Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage, and ASTM D4867/D4867M-09, Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures. Some state highway agencies evaluate moisture resistance during production to ensure a quality asphalt mixture. Currently AASHTO T283-14 and ASTM D4867/D4867M-09 do not provide a method to calculate the standard deviation of the tensile strength ratio (TSR), nor does it provide precision estimates for the TSR. The objective of this paper is to show how one can calculate the variance (or standard deviation) of a variable when the value of interest (i.e., TSR) is calculated from two other random variables. The standard deviation of a random variable that is a quotient of two other variables can be calculated easily as long as the individual variables are random, independent, and the standard deviations are small relative to the mean. The novelty of this approach is in a statistics-based method for determining the standard deviation of the TSR based on using an approximation for the ratio variance using ASTM D4460-97, Standard Practice for Calculating Precision Limits Where Values Are Calculated from Other Test Methods. This new approach to calculate the standard deviation of the TSR will be used to develop a precision statement for AASHTO T283-14 and ASTM D4867/D4867M-09 following ASTM E691-19e1, Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method (Superseded).

    Author Information:

    Bausano, Jason
    Ingevity Corporation, North Charleston, SC

    Steger, Richard
    Ingevity Corporation, Tulsa, OK


    Stock #: JTE20200680

    ISSN:0090-3973

    DOI: 10.1520/JTE20200680

    Author
    Title New Approach to Determine Standard Deviation and Precision Estimates for ASTM D4867/D4867M and AASHTO T283
    Symposium ,
    Committee D04