You are being redirected because this document is part of your ASTM Compass® subscription.
    This document is part of your ASTM Compass® subscription.

    If you are an ASTM Compass Subscriber and this document is part of your subscription, you can access it for free at ASTM Compass
    Volume 50, Issue 1 (May 2021)

    Experimental and Numerical Investigation of Single Fiber Pull-Out Tests of Steel Macro-Fiber and Glass Micro-Fiber in a Cementitious Matrix

    (Received 29 September 2020; accepted 8 March 2021)

    Published Online: 10 May 2021

    CODEN: JTEVAB

      Format Pages Price  
    PDF (2.05 MB) 18 $25   ADD TO CART

    Cite this document

    X Add email address send
    X
      .RIS For RefWorks, EndNote, ProCite, Reference Manager, Zoteo, and many others.   .DOCX For Microsoft Word



    Abstract

    This paper presents a modeling-based relationship between fiber diameter and frictional bond strength for steel macro-fiber (0.8-mm diameter) and glass micro-fiber (5–24-μm diameter) embedded in a cementitious matrix. A combined approach of experimental stress-displacement results obtained through single fiber pull-out tests and finite element modeling (FEM)–based stress-displacement results yielded the friction coefficient for the two types of fibers used. Further analysis relating to the pressure exerted on the fiber caused by the surrounding concrete reveals that a smaller fiber diameter would improve the bond strength. The improvements in frictional bond strength due to reduced diameter are based on FEM analysis. Validation of the experimental results is done through numerical approaches. The results showed that in the case of the same diameter, the pressure of the surrounding concrete decreases throughout the fiber sliding. The results also showed that the smaller diameter of fiber improves the properties of fiber-reinforced concrete interfaces.

    Author Information:

    Khabaz, Amjad
    Civil Engineering Department, Faculty of Engineering, Hasan Kalyoncu University,


    Stock #: JTE20200658

    ISSN:0090-3973

    DOI: 10.1520/JTE20200658

    Author
    Title Experimental and Numerical Investigation of Single Fiber Pull-Out Tests of Steel Macro-Fiber and Glass Micro-Fiber in a Cementitious Matrix
    Symposium ,
    Committee C17