You are being redirected because this document is part of your ASTM Compass® subscription.
    This document is part of your ASTM Compass® subscription.

    If you are an ASTM Compass Subscriber and this document is part of your subscription, you can access it for free at ASTM Compass
    Volume 49, Issue 4 (August 2020)

    Special Issue Paper

    Impact of Temperature Rise on the Seismic Performance of Concrete-Filled Double Skin Steel Columns with Prismatic Geometry

    (Received 21 January 2020; accepted 29 May 2020)

    Published Online: 21 August 2020

    CODEN: JTEVAB

      Format Pages Price  
    PDF (1.79 MB) 16 $25   ADD TO CART

    Cite this document

    X Add email address send
    X
      .RIS For RefWorks, EndNote, ProCite, Reference Manager, Zoteo, and many others.   .DOCX For Microsoft Word



    Abstract

    This paper studies the impact of temperature rise on the performance of Concrete-Filled Double Skin Tubular Steel Columns with prismatic geometry. In doing so, several columns whose interior cores were square, diamond, and circularly shaped and whose exterior cores were prismatic with a square cross-sectional area that increases with the slope of 2.1 degrees from top to the bottom, were constructed and exposed to the temperatures of 25°C, 250°C, 500°C, and 700°C. Afterward, all column specimens were subjected to cyclic loads adopted from the Applied Technology Council (ATC)-24 loading protocol, which proceeded until the specimens failed to further carry loads. The results indicate that although the failure modes of the columns with an interior core of a square or diamond shape are similar to each other, the columns whose interior cores were circularly shaped experienced more intensive damages compared to the others. The base of the columns was fractured diagonally with a degree of 45 by the temperature of 500°C, but at 700°C, the damages have occurred horizontally at the height of 10 cm from the column base. Moreover, the initial stiffness and ductility ratio of the columns with a diamond-shaped interior core was approximately two times greater than the other columns.

    Author Information:

    Pachideh, Ghasem
    Department of Civil Engineering, Semnan University, Central Organization of Semnan University, Semnan,

    Gholhaki, Majid
    Department of Civil Engineering, Semnan University, Central Organization of Semnan University, Semnan,

    Moshtagh, Amin
    Department of Civil Engineering, University of Garmsar, Garmsar,


    Stock #: JTE20200037

    ISSN:0090-3973

    DOI: 10.1520/JTE20200037

    Author
    Title Impact of Temperature Rise on the Seismic Performance of Concrete-Filled Double Skin Steel Columns with Prismatic Geometry
    Symposium ,
    Committee E05