You are being redirected because this document is part of your ASTM Compass® subscription.
    This document is part of your ASTM Compass® subscription.

    If you are an ASTM Compass Subscriber and this document is part of your subscription, you can access it for free at ASTM Compass
    Volume 49, Issue 6 (March 2021)

    Mechanical Properties and Durability of Mortars Made with Organic-Inorganic Repair Material

    (Received 14 January 2020; accepted 28 December 2020)

    Published Online: 29 March 2021

    CODEN: JTEVAB

      Format Pages Price  
    PDF (1.09 MB) 12 $25   ADD TO CART

    Cite this document

    X Add email address send
    X
      .RIS For RefWorks, EndNote, ProCite, Reference Manager, Zoteo, and many others.   .DOCX For Microsoft Word



    Abstract

    The purpose of this study was to evaluate the mechanical properties and durability of mortars made with organic-inorganic repair materials (OIRMs). The ratio between the main resin and hardener of the organic binder was fixed at 2:1 for the fabrication of OIRM mixtures, while the ratio of the inorganic binder was varied. For a performance comparison with OIRM mixtures, a mortar mixture was fabricated with a conventional cementitious repair material (CRM). The mechanical properties of mortars, such as flow, strength characteristics (compressive, flexural, and bonding strengths), drying shrinkage, and absorption, as well as the durability properties, such as freezing-thawing resistance and resistance to chloride ion penetration, were measured to evaluate mortar performance. The experimental results show that the OIRM mixtures had more favorable mechanical properties (except for compressive strength) and durability than the CRM mixture. In particular, the OIRM mixture with a 1:2:12 (resin:hardener:organic binder) ratio exhibited the most outstanding performances. In conclusion, based on the results of this study, OIRMs should be considered promising repair materials for degraded concrete structures in the future.

    Author Information:

    Lee, Seungtae
    Department of Civil Engineering, Kunsan National University, Kunsan,


    Stock #: JTE20200024

    ISSN:0090-3973

    DOI: 10.1520/JTE20200024

    Author
    Title Mechanical Properties and Durability of Mortars Made with Organic-Inorganic Repair Material
    Symposium ,
    Committee C09