You are being redirected because this document is part of your ASTM Compass® subscription.
    This document is part of your ASTM Compass® subscription.

    Volume 46, Issue 6 (March 2018)

    Response Surface Methodology for the Remaining Creep Life Estimation by the Small Punch Creep Test

    (Received 29 March 2017; accepted 30 June 2017)

    Published Online: 19 March 2018

    CODEN: JTEVAB

      Format Pages Price  
    PDF (973.66 KB) 8 $25   ADD TO CART

    Cite this document

    X Add email address send
    X
      .RIS For RefWorks, EndNote, ProCite, Reference Manager, Zoteo, and many others.   .DOCX For Microsoft Word



    Abstract

    In this article, a method for the estimation of the remaining creep life of steel alloy was studied using the response surface methodology (RSM) based on the central composite design (CCD). Small punch creep tests (SPCT) were performed on the specimens from the aged materials of SA-304L alloy, with different consumed creep life ratios at elevated temperatures. Then, two equations were developed to predict the fracture time and the minimum displacement rate with respect to the consumed creep life ratio of samples, the temperature, and the load of SPCT. The contour plots of responses show that there is a linear relationship between the fracture time and the minimum displacement rate in the logarithmic scale, in accordance with the Monkman-Grant relation.

    Author Information:

    Moradi, Ali
    College of Engineering, University of Tehran, Tehran,

    Soltani, Nasser
    College of Engineering, University of Tehran, Tehran,


    Stock #: JTE20170198

    ISSN:0090-3973

    DOI: 10.1520/JTE20170198

    Author
    Title Response Surface Methodology for the Remaining Creep Life Estimation by the Small Punch Creep Test
    Symposium ,
    Committee E08