You are being redirected because this document is part of your ASTM Compass® subscription.
    This document is part of your ASTM Compass® subscription.

    If you are an ASTM Compass Subscriber and this document is part of your subscription, you can access it for free at ASTM Compass
    Volume 46, Issue 4 (December 2017)

    Special Issue Paper

    Fatigue Crack Growth Testing and Evaluation for Aluminum Alloys at Temperatures of 25°C and −70°C

    (Received 16 November 2016; accepted 8 March 2017)

    Published Online: 11 December 2017

    CODEN: JTEVAB

      Format Pages Price  
    PDF (1.57 MB) 10 $25   ADD TO CART

    Cite this document

    X Add email address send
    X
      .RIS For RefWorks, EndNote, ProCite, Reference Manager, Zoteo, and many others.   .DOCX For Microsoft Word



    Abstract

    This paper seeks to measure and evaluate crack growth behaviors and residual lives of aluminum alloys (AAs) 2524-T3 and 7050-T7452 subjected to fatigue loading at temperatures of 25°C and −70°C. Fatigue crack growth tests were performed on AAs 2524-T3 and 7050-T7452 subjected to constant-amplitude and actual random-spectra loading histories at temperatures of about 25°C and −70°C, respectively, to determine the crack growth behaviors and residual lives. The interaction mechanisms between cryogenic temperature and the fatigue load were deduced on the basis of the results of fractographic analysis. The crack growth behaviors and residual lives were evaluated and compared at both temperatures of 25°C and −70°C. Good correlation was achieved between the predictions and actual experiments.

    Author Information:

    Liu, M. D.
    School of Transportation Science and Engineering, Beihang University, Beijing,

    Xiong, J. J.
    School of Transportation Science and Engineering, Beihang University, Beijing,


    Stock #: JTE20160592

    ISSN:0090-3973

    DOI: 10.1520/JTE20160592

    Author
    Title Fatigue Crack Growth Testing and Evaluation for Aluminum Alloys at Temperatures of 25°C and −70°C
    Symposium ,
    Committee E08