You are being redirected because this document is part of your ASTM Compass® subscription.
This document is part of your ASTM Compass® subscription.
Volume 45, Issue 6 (November 2017)
Special Issue Paper
Stress Concentration Factors for ASTM E8/E8M-15a Plate-Type Specimens for Tension Testing
(Received 23 July 2016; accepted 15 September 2016)
Published Online: 23 November 2017
CODEN: JTEVAB
X
.RIS
For RefWorks, EndNote, ProCite, Reference Manager, Zoteo, and many others.
.DOCX
For Microsoft Word
Abstract
On occasion, ASTM standard test specimens fail in one of the transition regions between the gauge and grip sections due to the stress concentration present there. Then one can seek stress relief by increasing the fillet radius in the transition regions. The intent here, therefore, is to quantify the stress relief afforded by such means. We use finite elements to determine the stress concentration factors for the various dimensions admitted by ASTM E8/E8M-15a. The finite element results are verified by current verification techniques recommended by ASME, and are accurate to three figures.
Author Information:
Kardak, A. A.
Optimum Engineering Solutions, Inc., Edwardsville, IL
Bilich, L. A.
C & C Machine and Manufacturing Inc., Harvey, LA
Sinclair, G. B.
Department of Mechanical Engineering, Louisiana State University, Baton Rouge, LA
Stock #: JTE20160385
ISSN:0090-3973
DOI: 10.1520/JTE20160385
Author
Title Stress Concentration Factors for ASTM E8/E8M-15a Plate-Type Specimens for Tension Testing
Symposium ,
Committee A01