You are being redirected because this document is part of your ASTM Compass® subscription.
    This document is part of your ASTM Compass® subscription.

    Volume 45, Issue 6 (November 2017)

    Special Issue Paper

    Deformations of Cylindrical Corrugated Pipes

    (Received 24 March 2016; accepted 28 September 2016)

    Published Online: 2017

    CODEN: JTEVAB

      Format Pages Price  
    PDF (889.36 KB) 7 $25   ADD TO CART

    Cite this document

    X Add email address send
    X
      .RIS For RefWorks, EndNote, ProCite, Reference Manager, Zoteo, and many others.   .DOCX For Microsoft Word



    Abstract

    Deflection is the main criteria to evaluate the performance of the pipes and corrugations are added to pipes to increase the stiffness. In the relevant standards, ring stiffness is taken into account together with deformation. In this study, the state of strain–stress of the circular cylindrical shell under the uniform loads in the direction of the vertical diameter, distributed along a certain length of the generatrixes of the shell is investigated by the analytical and experimental methods. The obtained analytical results are applied to the investigation of the state of strain of the corrugated plastic pipes which are widely used in the construction of infrastructure facilities. Comparison of the obtained analytical and experimental data reveals their satisfactory agreement. The results enable to overcome the difficulties in assessing the data received during testing stiffness of corrugated pipes which are subjected to the vertical loads.

    Author Information:

    Abdulaliyev, Z.
    Istanbul Technical Univ., Faculty of Civil Engineering, Civil Engineering Dept., Istanbul,

    Ataoglu, S.
    Istanbul Technical Univ., Faculty of Civil Engineering, Civil Engineering Dept., Istanbul,

    Gemici, Z.
    Mir R&D, Yildiz Technical Univ. Campuses, Istanbul,


    Stock #: JTE20160176

    ISSN:0090-3973

    DOI: 10.1520/JTE20160176

    Author
    Title Deformations of Cylindrical Corrugated Pipes
    Symposium ,
    Committee F17