You are being redirected because this document is part of your ASTM Compass® subscription.
    This document is part of your ASTM Compass® subscription.

    Volume 45, Issue 3 (May 2017)

    Analysis on the Issues in ISO 6892-1 and TENSTAND WP4 Report Based on the Data of Confirm Tests by 21 Laboratories

    (Received 4 June 2015; accepted 3 February 2016)

    Published Online: 2017

    CODEN: JTEVAB

      Format Pages Price  
    PDF (1.05 MB) 9 $25   ADD TO CART

    Cite this document

    X Add email address send
    X
      .RIS For RefWorks, EndNote, ProCite, Reference Manager, Zoteo, and many others.   .DOCX For Microsoft Word



    Abstract

    To better understand and reach consensus on a series of issues around the standard ISO 6892-1 and TENSTAND WP4 report, extensive experiments were conducted using 5 different methods with non-aging high-uniformity tensile reference materials. These tests were performed by 21 laboratories and a number of findings have been observed by analyzing the data collected from these tests. The findings suggested that the two reasons to recommend strain control method cited in TENSTAND WP4 report were not valid as the actual test conditions do not match the conditions in the report. A number of unjustified requirements in ISO 6892-1 were listed in this paper according to the findings. Four requests to update ISO 6892-1 were proposed for consideration.


    Author Information:

    Li, H.
    Testing, Analysis and Inspection Center, Baosteel Corporation, Shanghai,

    Zhou, X.
    Testing, Analysis and Inspection Center, Baosteel Corporation, Shanghai,

    Shen, J.
    Testing, Analysis and Inspection Center, Baosteel Corporation, Shanghai,

    Luo, D.
    Testing, Analysis and Inspection Center, Baosteel Corporation, Shanghai,


    Stock #: JTE20150479

    ISSN:0090-3973

    DOI: 10.1520/JTE20150479

    Author
    Title Analysis on the Issues in ISO 6892-1 and TENSTAND WP4 Report Based on the Data of Confirm Tests by 21 Laboratories
    Symposium ,
    Committee A01