You are being redirected because this document is part of your ASTM Compass® subscription.
    This document is part of your ASTM Compass® subscription.

    If you are an ASTM Compass Subscriber and this document is part of your subscription, you can access it for free at ASTM Compass
    Volume 9, Issue 2 (July 2020)

    Special Issue Paper

    Development and Validation of Processing Maps for Hot Deformation of Modified AISI 321 Austenitic Stainless Steel

    (Received 4 April 2019; accepted 7 January 2020)

    Published Online: 07 April 2020

    CODEN: MPCACD

      Format Pages Price  
    PDF (1.82 MB) 20 $25   ADD TO CART

    Cite this document

    X Add email address send
    X
      .RIS For RefWorks, EndNote, ProCite, Reference Manager, Zoteo, and many others.   .DOCX For Microsoft Word



    Abstract

    Hot deformation studies and optimization of hot working parameters and corresponding microstructure evolution were explored in a modified AISI 321 austenitic stainless steel. Hot compression tests were carried out in the temperature range of 800°C–1,100°C and five different strain rates (0.001–10 s−1). Processing maps were developed based on the results of hot compression tests, employing the principles of dynamic materials model and various domains of microstructure evolution were identified. The stable and unstable domains, as well as various domains indicating other microstructural reconstitutive mechanisms, including dynamic recrystallization (DRx), were identified with the aid of a processing map. The domain for DRx was confirmed by microstructural analysis of deformed specimens and also from the inflections in hardening curves. The processing regime for microstructural control was identified, and the results were validated by actual forging trials on a 1,000-T hydraulic forging press. The grain size of laboratory-tested hot-compressed samples and industrially forged billets exhibited excellent correlation. Constitutive equation for hot deformation was also developed for the steel based on hot compression test results.

    Author Information:

    Anoop, C. R.
    Liquid Propulsion Systems Center (LPSC) Valiamala, Indian Space Reserch Organisation (ISRO), Thiruvananthapuram,

    Singh, R. K.
    Liquid Propulsion Systems Center (LPSC) Valiamala, Indian Space Reserch Organisation (ISRO), Thiruvananthapuram,

    Kumar, Ravi Ranjan
    Liquid Propulsion Systems Center (LPSC) Valiamala, Indian Space Reserch Organisation (ISRO), Thiruvananthapuram,

    Miyala, Jayalakshmi
    Liquid Propulsion Systems Center (LPSC) Valiamala, Indian Space Reserch Organisation (ISRO), Thiruvananthapuram,

    Murty, S. V. S. Narayana
    Vikram Sarabhai Space Center (VSSC), Indian Space Reserch Organisation (ISRO), Thiruvananthapuram,

    Tharian, K. Thomas
    Liquid Propulsion Systems Center (LPSC) Valiamala, Indian Space Reserch Organisation (ISRO), Thiruvananthapuram,


    Stock #: MPC20190081

    ISSN:2379-1365

    DOI: 10.1520/MPC20190081

    Author
    Title Development and Validation of Processing Maps for Hot Deformation of Modified AISI 321 Austenitic Stainless Steel
    Symposium ,
    Committee A01