You are being redirected because this document is part of your ASTM Compass® subscription.
    This document is part of your ASTM Compass® subscription.

    Volume 8, Issue 5 (October 2019)

    Special Issue Paper

    Critical Conditions for Dynamic Recrystallization of Hot Deformed 1 wt% Chromium - 1 wt% Molybdenum Rotor Steel

    (Received 25 January 2019; accepted 10 April 2019)

    Published Online: 2019

    CODEN: MPCACD

      Format Pages Price  
    PDF (2.37 MB) 18 $25   ADD TO CART

    Cite this document

    X Add email address send
    X
      .RIS For RefWorks, EndNote, ProCite, Reference Manager, Zoteo, and many others.   .DOCX For Microsoft Word



    Abstract

    A medium carbon 1 wt% Chromium and 1 wt% Molybdenum low-alloy steel is an important material for making of rotors of turbines. Its hot forging requires precise control of temperature, strain, and strain rate for defect-free forging. In a view of this, this steel was subjected to a hot compression test in a thermomechanical simulator, Gleeble 3800®. Hot compression was carried out at temperatures of 900°C, 1,000°C, and 1,100°C. At each temperature four strain rates, i.e., 0.001 s−1, 0.01 s−1, 0.1 s−1 and 1 s−1, were used. Constitutive equations were used to analyze hot flow behavior, material constants, and activation energy. A mathematical model developed by Poliak and Jonas has been used to determine critical condition parameters like critical stress (σc), critical strain (εc), peak stress (σp), and peak strain (εp). For dynamic recrystallization (DRX), the variation of strain hardening rate up to steady state stress (σss), steady state strain (εss), and volume fraction of DRX (X, D, R, X, , , , , , ), with the help of Avrami-type models, have been discussed. Zener Hollomon parameters (Z) explained in terms of strain rate and steady state that flow stress (σss) has been expressed. Microstructures at different hot deformation conditions have been reported and explained.

    Author Information:

    Kumar, Sumit
    Metallurgical and Materials Engineering Department, Indian Institute of Technology Roorkee, Roorkee,

    Chaudhari, G. P.
    Metallurgical and Materials Engineering Department, Indian Institute of Technology Roorkee, Roorkee,

    Nath, Sumeer K.
    Metallurgical and Materials Engineering Department, Indian Institute of Technology Roorkee, Roorkee,


    Stock #: MPC20190022

    ISSN:2379-1365

    DOI: 10.1520/MPC20190022

    Author
    Title Critical Conditions for Dynamic Recrystallization of Hot Deformed 1 wt% Chromium - 1 wt% Molybdenum Rotor Steel
    Symposium ,
    Committee A01