You are being redirected because this document is part of your ASTM Compass® subscription.
    This document is part of your ASTM Compass® subscription.

    If you are an ASTM Compass Subscriber and this document is part of your subscription, you can access it for free at ASTM Compass
    Volume 7, Issue 1 (April 2018)

    Instrumented Impact Testing of Miniaturized Charpy Specimens of AM Ti-6Al-4V

    (Received 3 November 2017; accepted 29 January 2018)

    Published Online: 02 April 2018

    CODEN: MPCACD

      Format Pages Price  
    PDF (1.22 MB) 13 $25   ADD TO CART

    Cite this document

    X Add email address send
    X
      .RIS For RefWorks, EndNote, ProCite, Reference Manager, Zoteo, and many others.   .DOCX For Microsoft Word



    Abstract

    An investigation on the impact toughness properties of wrought and additively manufactured (AM) Ti-6Al-4V was conducted at National Institute for Standards and Technology (NIST) Boulder by means of instrumented impact tests on miniaturized Charpy specimens. Full transition curves for absorbed energy and lateral expansion were obtained by performing tests in the temperature range between −196°C and 700°C. The effect of various parameters was investigated for AM specimens, namely specimen orientation, hot isostatic pressing (HIPing), and notch configuration (printed or machined). Our results indicate that AM specimens exhibit equivalent or better impact toughness than wrought material after HIPing and that the material is more resistant to cracks growing in the plane perpendicular to the build direction than in the plane containing the build direction. HIPing has a significantly beneficial effect for the AM material, while no effect of notch configuration was observed from the results obtained.

    Author Information:

    Lucon, Enrico
    NIST, Applied Chemicals and Materials Division, Boulder, CO

    Hrabe, Nikolas
    NIST, Applied Chemicals and Materials Division, Boulder, CO


    Stock #: MPC20170160

    ISSN:2379-1365

    DOI: 10.1520/MPC20170160

    Author
    Title Instrumented Impact Testing of Miniaturized Charpy Specimens of AM Ti-6Al-4V
    Symposium ,
    Committee E08