You are being redirected because this document is part of your ASTM Compass® subscription.
    This document is part of your ASTM Compass® subscription.

    If you are an ASTM Compass Subscriber and this document is part of your subscription, you can access it for free at ASTM Compass
    Volume 6, Issue 1 (April 2017)

    Effect of Heating and Thermal Deformation on Austenite Grain Size of B1500HS Boron Steel

    (Received 12 October 2016; accepted 24 January 2017)

    Published Online: 28 April 2017

    CODEN: MPCACD

      Format Pages Price  
    PDF (4.01 MB) 18 $25   ADD TO CART

    Cite this document

    X Add email address send
    X
      .RIS For RefWorks, EndNote, ProCite, Reference Manager, Zoteo, and many others.   .DOCX For Microsoft Word



    Abstract

    To investigate the effect of temperature and soaking time on the austenite grain size of B1500HS boron steel, samples of B1500HS steel were, respectively, heated at 900, 925, 950, 975, and 1000°C for 10, 20, 40, and 60 min, and the grain sizes of austenite for the heated samples were measured. Besides that, samples of B1500HS steel were heated at 1000°C for 10, 20, and 40 min by the thermo-mechanical simulator Gleeble-1500D, and then deformed with the deformation of 10, 20, and 30 % at the strain rate of 0.1 and 0.5 s−1, respectively, the effect of deformation degree and strain rate on the grain size of austenite was also studied. The experimental results showed that the average grain size of austenite rises with the increase of austenitization temperature and soaking time, but the average grain size reduced with the increase of deformation degree and strain rate. Finally, a grain growth model of B1500HS steel was given according to the experimental results.

    Author Information:

    Li, H.
    School of Materials Science and Engineering, Shandong Univ. of Science and Technology, Qingdao, Shandong

    Yang, H.
    School of Materials Science and Engineering, Shandong Univ. of Science and Technology, Qingdao, Shandong

    He, L.
    School of Materials Science and Engineering, Shandong Univ. of Science and Technology, Qingdao, Shandong

    Zhang, C.
    School of Materials Science and Engineering, Shandong Univ. of Science and Technology, Qingdao, Shandong


    Stock #: MPC20160114

    ISSN:2165-3992

    DOI: 10.1520/MPC20160114

    Author
    Title Effect of Heating and Thermal Deformation on Austenite Grain Size of B1500HS Boron Steel
    Symposium ,
    Committee A01