Advances in Civil Engineering Materials

Advances in Civil Engineering Materials

About this journal

The journal is published continuously in one annual issue online. Papers are published online as they are approved and edited. Special Issues may also be published on specific topics of interest to our readers.

Advances in Civil Engineering Materials provides high-quality, papers on a broad range of topics relating to the properties and performance of civil engineering materials.

Materials Covered: (but not limited to)
  • Concrete
  • Asphalt
  • Steel
  • Polymers and polymeric composites
  • Wood
  • Soils
  • Other materials used in civil engineering applications (for example, pavements, bridges, and buildings, including nonstructural building elements such as insulation and roofing), and environmental systems (including water treatment)
Core Topics Covered:
  • Materials characterization, such as chemical composition, nanostructure, and microstructure
  • Physical materials properties, such as strength, stiffness, and fracture behavior
  • Materials constructability, such as construction methods, quality control/assurance, life cycle analysis, and sustainability
  • Materials durability

Papers may present experimental or modeling studies based on laboratory or field observations. Papers relating to sustainability of engineering materials or to the impact of materials on sustainability of engineering structures are especially encouraged.

First Look Papers

Note to users: The section First Look Papers contains peer reviewed and accepted articles to be published in this journal. When the final article is assigned to an issue of the journal, the First Look Papers version will be removed from this section and will appear in the associated journal issue.

Development and Performance Analysis of Stiffening Gussasphalt

ASTM International

Page Count: 11

Published Online: 08 May 2018

DOI: 10.1520/ACEM20170008

Format: PDF

Price: $25

View Abstract

Editorial Board

Co-Editors

John E. Haddock, Lyles School of Civil Engineering, Purdue University, West Lafayette, IN, USA

Jason H. Ideker, School of Civil and Construction Engineering, Oregon State University, Corvallis, OR, USA

Editorial Board Members

  • Dr. Matthew P. Adams, New Jersey Institute of Technology, Newark, NJ, USA
  • Mr. Archis Ramesh Ambulkar, OCT Water Quality Academy, North Highlands, CA, USA
  • Dr. Matthew J. Bandelt, New Jersey Institute of Technology, Newark, NJ, USA
  • Dr. Tara Cavalline, University of North Carolina, Charlotte, NC, USA
  • Dr. Xingwei Chen, Louisiana Department of Transportation and Development (LADOTD), Baton Rouge, LA, USA
  • Dr. Erdem Coleri, Oregon State University, Corvallis, OR, USA
  • April Doerr-Snyder, RJ Lee Group, Inc., Monroeville, PA, USA
  • Dr. Thano Drimalas, The University of Texas at Austin, Austin, TX, USA
  • Mr. Andrew Fahim, Giatec Scientific Inc., Ottawa, Ontario, Canada
  • Dr. Christopher Ferraro, University of Florida, Gainesville, FL, USA
  • Dr. Adam J. T. Hand, University of Nevada Reno, Reno, NV, USA
  • Dr. Shiho Kawashima, Columbia University, New York, NY, USA
  • Dr. Yong-Rak Kim, Texas A&M University, College Station, TX, USA
  • Dr. Stacey E. Kulesza, Texas State University, San Marcos, TX, USA
  • Dr. Eric N. Landis, University of Maine, Orono, ME, USA
  • Dr. Eyal Levenberg, Technical University of Denmark, Kongens Lyngby, Denmark
  • Dr.-Ing. Miomir Miljković, University of Niš, Niš, Serbia
  • Dr. Phalguni Mukhopadhyaya, University of Victoria, Victoria, BC, Canada
  • Dr. Amir Poursaee, Clemson University, Clemson, SC, USA
  • Dr. Claudiane M. Ouellet-Plamondon, École de Technologie Supérieure, Montreal, Quebec, Canada
  • Dr. Lin Shen, University of Hawai'i at Manoa, Honolulu, HI, USA
  • Dr. Xiang Shu, California Department of Transportation, Sacramento, CA, USA
  • Paul Stutzman, NIST, Gaithersburg, MD, USA
  • Dr. Prannoy Suraneni, University of Miami, Coral Gables, FL, USA
  • Dr. Jussara Tanesi, American Engineering Testing, Inc., St. Paul, MN, USA
  • Dr. Kejin Wang, Iowa State University of Science & Technology, Ames, IA, USA
  • Andreas Wolf, Dow Corning GmbH., AETS Global Construction Industry, Wiesbaden, Hessia, Germany
  • Feipeng Xiao, Tongji University, Shanghai, China
  • Dr. Lingyun You, Michigan Technological University, Houghton, MI, USA

Author Instructions

  • Submit your paper online using the Online Paper Submittal tab.
  • You must accept the ASTM copyright transfer agreement.
  • Submit only original work. Previously published papers are never acceptable.
  • Author Instructions for best practices and the ASTM Style Manual can be found here.
  • Provide complete references so all authors get credit for their work and papers are accepted by indexing and literature search services.
  • Written permission from the copyright holder must be submitted for any quotes, tables, or figures with appropriate credit.
  • All artwork will appear in color online and in black and white if printed so be sure your color materials are understandable in black and white. This includes text so don’t refer to the “blue” area but rather the dark area, bold line, dotted line, etc.
  • All papers are reviewed by at least two anonymous peer reviewers.
  • Your approved, peer-reviewed paper will be copy-edited and formatted. You will be asked to approve the final version.
  • Upon approval of the edited version, your paper will be published in the electronic journal.

Subscription Information

Individual*

How does it work?

You receive a User ID and Password to login to your subscription.

Online only: $294

*Individual subscriptions provide single user access for 12 months via username and password.

Individual article downloads available for $25 directly from the website

Institutional**

How does it work?

Access is by IP address.

Online only: $469

Please contact Sales or call 1-877-909-ASTM.
**Institutional subscriptions provide single site (one geographic location) access for 12 months via IP address.

For Multi-site subscription and pricing, please contact Sales or call 1-877-909-ASTM.

Subscription Period

This subscription ends 12 months from the day your order is processed.

Read ASTM License Agreement
Indexed In
Impact Factor 1.4

Ei Compendex®

Google Scholar

Scopus

Emerging Sources Citation Index (Web of Science)

Details
ISSN: 2379-1357
E-ISSN: 2165-3984
Coden: ACEMF9