Journal Published Online: 02 September 2016
Volume 5, Issue 1

Factors Influencing the Long-Term Properties of Fly Ash-Based Geopolymer Mortar

CODEN: ACEMF9

Abstract

The primary goal of the paper was to study the effects of key factors on the long-term mechanical properties of fly ash-based geopolymer. The factors considered consisted of curing time, humidity, temperature, admixture, and water coefficient. In the study, the geopolymer paste and mortar specimens were prepared and cured at four different environmental conditions: (1) ∼24°C and approximately 45 % RH; (2) 95°C and 100 %R.H; (3) 80°C and 25 %RH; and (4) ∼24°C and 90 %R.H. The compressive and flexural strength tests were performed for the mortar specimens at the ages of 7, 28, 120, 360, 540, and 720 days. X-ray diffraction (XRD), X-ray fluorescence (XRF), and nuclear magnetic resonance spectroscopy (23Na, 27Al, 29Si, MAS NMR) tests were performed for the paste specimens at the ages of 7, 28, 120, 360, 540, and 720 days. Selected specimens were also examined under scanning electron microscope (SEM). The results indicated that water evaporation from specimens was a major cause of the strength development of the geopolymer. In addition to SiO4−4 anions in alkali activator, which accelerated the geopolymerization, the Na+, Ca2+, and Mg2+ ions in the system also played an important role in bridging -Si-O-Si-O-Al- chain, thus improving strength development of the geopolymer. The crystallization occurred only in the hydrothermal environment, and it had little influence on the strength development of the low calcium fly ash-based geopolymer mortar as a very small amount of crystalline phase was formed.

Author Information

Duong, N.
Dept. of Glass and Ceramics, Faculty of Chemical Technology, ICT Prague, CZ
Škvára, F.
Dept. of Glass and Ceramics, Faculty of Chemical Technology, ICT Prague, CZ
Pages: 23
Price: $25.00
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Stock #: ACEM20160002
ISSN: 2165-3984
DOI: 10.1520/ACEM20160002