Author Information

Thomas Andersson

http://orcid.org/0000-0002-4920-0455

Affiliation: Sandvik Materials Technology

Division/Department: R&D

Address:
Sandviken, SE-811 81
Sweden

Other Names:
T. Andersson; Th. Andersson

Publications


A Model for Analysis of the Effect of Final Annealing on the In- and Out-of-Reactor Creep Behavior of Zircaloy Cladding

STP16185S
Thomas Andersson
AB Sandvik Steel, R & D Centre


Beta-Quenching of Zircaloy Cladding Tubes in Intermediate or Final Size—Methods to Improve Corrosion and Mechanical Properties

STP37048S
Th. Andersson
Sandvik AB


Correlation Between 400°C Steam Corrosion Behavior, Heat Treatment, and Microstructure of Zircaloy-4 Tubing

STP18861S
Thomas Andersson
AB Sandvik Steel


Corrosion Performance of Zircaloy-2 and Zircaloy-4 PWR Fuel Cladding

STP18867S
Thomas Andersson
AB Sandvik Steel


Creep Strength of Zircaloy Tubing at 400°C as Dependent on Metallurgical Structure and Texture

STP32111S
T. Andersson
Steel Research Center of Sandvik


Detailed Analysis of the Microstructure of the Metal/Oxide Interface Region in Zircaloy-2 after Autoclave Corrosion Testing

STP152920120024
Thomas Andersson
Sandvik Materials Technology, R&D


Detailed Analysis of the Microstructure of the Metal/Oxide Interface Region in Zircaloy-2 after Autoclave Corrosion Testing

JAI102956
Thomas Andersson
Sandvik Materials Technology


Ductility of Zircaloy Canning Tubes in Relation to Stress Ratio in Biaxial Testing

STP36672S
T. Andersson
Sandvik AB


Effect of Irradiation on the Strength, Ductility, and Defect Sensitivity of Fully Recrystallized Zircaloy Tube

STP36678S
T. Andersson
Sandvik AB


Effects of Hydrogen Pickup and Second-Phase Particle Dissolution on the In-Reactor Corrosion Performance of BWR Claddings

STP11385S
T. Andersson
AB Sandvik Steel


Experience of Element and Full-Bearing Testing of Materials over Several Years

STP36140S
T. Andersson
SKF Engineering and Research Centre B. V.


Nodular Corrosion Resistance of Zircaloy-2 in Relation to Second-Phase Particle Distribution

STP28131S
T. Andersson
Research and Development Centre


Structure and Properties of a 19Cr-25Ni-Mo-Ti Steel

STP36881S
T. Andersson
Sandvik Steel Research Centre


The Effect of Beta-Quenching in Final Dimension on the Irradiation Growth of Tubes and Channels

JAI12337
T. Andersson
Sandvik Materials Technology


The Effect of Beta-Quenching in Final Dimension on the Irradiation Growth of Tubes and Channels

STP37512S
T. Andersson
Sandvik Materials Technology


The Effect of Duplex Cladding Outer Component Tin Content on Corrosion, Hydrogen Pick-up, and Hydride Distribution at Very High Burnup

STP37523S
T. Andersson
Sandvik Materials Technology AB


The Effect of Duplex Cladding Outer Component Tin Content on Corrosion, Hydrogen Pick-up, and Hydride Distribution at Very High Burnup

JAI12411
T. Andersson
Sandvik Materials Technology AB


The Effect of Liner Component Iron Content on Cladding Corrosion, Hydriding, and PCI Resistance

STP37539S
T. Andersson
Sandvik Materials Technology


The Effect of Liner Component Iron Content on Cladding Corrosion, Hydriding, and PCI Resistance

JAI12444
T. Andersson
Sandvik Materials Technology


StockCodeTitlePublished AsAffiliationPub Date by Most Viewed
STP16185S A Model for Analysis of the Effect of Final Annealing on the In- and Out-of-Reactor Creep Behavior of Zircaloy Cladding Thomas Andersson AB Sandvik Steel, R & D Centre 01 January 1996
STP37048S Beta-Quenching of Zircaloy Cladding Tubes in Intermediate or Final Size—Methods to Improve Corrosion and Mechanical Properties Th. Andersson Sandvik AB 01 January 1982
STP18861S Correlation Between 400°C Steam Corrosion Behavior, Heat Treatment, and Microstructure of Zircaloy-4 Tubing Thomas Andersson AB Sandvik Steel 01 January 1989
STP18867S Corrosion Performance of Zircaloy-2 and Zircaloy-4 PWR Fuel Cladding Thomas Andersson AB Sandvik Steel 01 January 1989
STP32111S Creep Strength of Zircaloy Tubing at 400°C as Dependent on Metallurgical Structure and Texture T. Andersson Steel Research Center of Sandvik 01 January 1974
STP152920120024 Detailed Analysis of the Microstructure of the Metal/Oxide Interface Region in Zircaloy-2 after Autoclave Corrosion Testing Thomas Andersson Sandvik Materials Technology, R&D 01 April 2012
JAI102956 Detailed Analysis of the Microstructure of the Metal/Oxide Interface Region in Zircaloy-2 after Autoclave Corrosion Testing Thomas Andersson Sandvik Materials Technology 11 July 2011
STP36672S Ductility of Zircaloy Canning Tubes in Relation to Stress Ratio in Biaxial Testing T. Andersson Sandvik AB 01 January 1979
STP36678S Effect of Irradiation on the Strength, Ductility, and Defect Sensitivity of Fully Recrystallized Zircaloy Tube T. Andersson Sandvik AB 01 January 1979
STP11385S Effects of Hydrogen Pickup and Second-Phase Particle Dissolution on the In-Reactor Corrosion Performance of BWR Claddings T. Andersson AB Sandvik Steel 01 January 2002
STP36140S Experience of Element and Full-Bearing Testing of Materials over Several Years T. Andersson SKF Engineering and Research Centre B. V. 01 January 1982
STP28131S Nodular Corrosion Resistance of Zircaloy-2 in Relation to Second-Phase Particle Distribution T. Andersson Research and Development Centre 01 January 1987
STP36881S Structure and Properties of a 19Cr-25Ni-Mo-Ti Steel T. Andersson Sandvik Steel Research Centre 01 January 1979
JAI12337 The Effect of Beta-Quenching in Final Dimension on the Irradiation Growth of Tubes and Channels T. Andersson Sandvik Materials Technology 01 June 2005
STP37512S The Effect of Beta-Quenching in Final Dimension on the Irradiation Growth of Tubes and Channels T. Andersson Sandvik Materials Technology 01 January 2005
STP37523S The Effect of Duplex Cladding Outer Component Tin Content on Corrosion, Hydrogen Pick-up, and Hydride Distribution at Very High Burnup T. Andersson Sandvik Materials Technology AB 01 January 2005
JAI12411 The Effect of Duplex Cladding Outer Component Tin Content on Corrosion, Hydrogen Pick-up, and Hydride Distribution at Very High Burnup T. Andersson Sandvik Materials Technology AB 13 July 2005
STP37539S The Effect of Liner Component Iron Content on Cladding Corrosion, Hydriding, and PCI Resistance T. Andersson Sandvik Materials Technology 01 January 2005
JAI12444 The Effect of Liner Component Iron Content on Cladding Corrosion, Hydriding, and PCI Resistance T. Andersson Sandvik Materials Technology 00 October 2005