Author Information

Donald F. Adams

Affiliation: University of Wyoming

Division/Department: Department of Mechanical Engineering

Address:
P.O. Box 3295
Laramie, Wyoming 82071-3295
United States

Phone: 307-766-2371

Other Names:
D. Adams; D. F. Adams

Publications


An Evaluation of Composite Material Compression Test Methods

CTR10150J
Donald F. Adams
University of Wyoming


Analysis of Neat Resin Cracking Induced by Rapid Moisture Loss

CTR10837J
Donald F. Adams
University of Wyoming


Analytical/Experimental Correlations of Stiffness Properties of Unidirectional Composites

CTR10763J
D. F. Adams
University of Wyoming


Biaxial and Triaxial Failure Strengths of 6061-T6 Aluminum and AS4/3501-6 Carbon/Epoxy Laminates Obtained by Testing Thickness-Tapered Cruciform Specimens

CTR10919J
Donald F. Adams
University of Wyoming


Development of a True Triaxial Testing Facility for Composite Materials

STP13518S
Donald F. Adams
University of Wyoming


Effect of Specimen Tab Configuration on Compression Testing of Composite Materials

CTR10469J
Donald F. Adams
University of Wyoming


Energy Release Rate During Delamination Crack Growth in Notched Composite Laminates

STP36301S
Donald F. Adams
Concept Analysis Corporation


Experimental Study of Three- and Four-Point Shear Test Specimens

CTR10454J
Donald F. Adams
University of Wyoming


Frequency and Load Ratio Effects on Critical Strain Energy Release Rate Gc Thresholds of Graphite/Epoxy Composites

STP24381S
Donald F. Adams
University of Wyoming


Impact Response of Polymer-Matrix Composite Materials

STP26957S
D. F. Adams
University of Wyoming


In-Plane and Interlaminar losipescu Shear Properties of Various Graphite Fabric/Epoxy Laminates

CTR10247J
Donald F. Adams
University of Wyoming


Inelastic Micromechanical Analysis of Graphite/Epoxy Composites Subjected to Hygrothermal Cycling

STP34861S
D. F. Adams
University of Wyoming


Inelastic Shear Response of Unidirectional Composites from Torsion of Solid Bars

STP12619S
D. F. Adams
University of Wyoming


Influence of Test Fixture Configuration on the Measured Compressive Strength of a Composite Material

CTR10072J
Donald F. Adams
University of Wyoming


Iosipescu Shear Properties of SMC Composite Materials

STP28471S
D. F. Adams
University of Wyoming


Mechanical Behavior of Three Sheet Molding Compounds

STP29382S
D. F. Adams
University of Wyoming


Micromechanical Modeling of Yielding and Crack Propagation in Unidirectional Metal Matrix Composites

STP25946S
Donald F. Adams
University of Wyoming


Static and Impact Behavior of Graphite/Epoxy Composite Laminates Containing Third-Phase Reinforcement Materials

JTE10671J
D. F. Adams
University of Wyoming


Tabbed Versus Untabbed Fiber-Reinforced Composite Compression Specimens

STP10628S
Donald F. Adams
Wyoming Test Fixtures, Inc.


The Wyoming Combined Loading Compression (CLC) Test Method

CTR10023J
Donald F. Adams
University of Wyoming


The Wyoming-Modified Two-Rail Shear Test Fixture for Composite Materials

CTR10984J
D. Adams
University of Wyoming


Unidirectional Composite Compression Strengths Obtained by Testing Cross-Ply Laminates

CTR10109J
Donald F. Adams
University of Wyoming


World of Composites

CTR10670J
D. F. Adams
University of Wyoming


World of Composites

CTR10700J
Donald F. Adams
University of Wyoming


StockCodeTitlePublished AsAffiliationPub Date by Most Viewed
CTR10150J An Evaluation of Composite Material Compression Test Methods Donald F. Adams University of Wyoming
CTR10837J Analysis of Neat Resin Cracking Induced by Rapid Moisture Loss Donald F. Adams University of Wyoming
CTR10763J Analytical/Experimental Correlations of Stiffness Properties of Unidirectional Composites D. F. Adams University of Wyoming
CTR10919J Biaxial and Triaxial Failure Strengths of 6061-T6 Aluminum and AS4/3501-6 Carbon/Epoxy Laminates Obtained by Testing Thickness-Tapered Cruciform Specimens Donald F. Adams University of Wyoming
STP13518S Development of a True Triaxial Testing Facility for Composite Materials Donald F. Adams University of Wyoming 01 January 2000
CTR10469J Effect of Specimen Tab Configuration on Compression Testing of Composite Materials Donald F. Adams University of Wyoming
STP36301S Energy Release Rate During Delamination Crack Growth in Notched Composite Laminates Donald F. Adams Concept Analysis Corporation 01 January 1985
CTR10454J Experimental Study of Three- and Four-Point Shear Test Specimens Donald F. Adams University of Wyoming
STP24381S Frequency and Load Ratio Effects on Critical Strain Energy Release Rate Gc Thresholds of Graphite/Epoxy Composites Donald F. Adams University of Wyoming 01 January 1987
STP26957S Impact Response of Polymer-Matrix Composite Materials D. F. Adams University of Wyoming 01 January 1977
CTR10247J In-Plane and Interlaminar losipescu Shear Properties of Various Graphite Fabric/Epoxy Laminates Donald F. Adams University of Wyoming
STP34861S Inelastic Micromechanical Analysis of Graphite/Epoxy Composites Subjected to Hygrothermal Cycling D. F. Adams University of Wyoming 01 January 1978
STP12619S Inelastic Shear Response of Unidirectional Composites from Torsion of Solid Bars D. F. Adams University of Wyoming 01 January 1993
CTR10072J Influence of Test Fixture Configuration on the Measured Compressive Strength of a Composite Material Donald F. Adams University of Wyoming
STP28471S Iosipescu Shear Properties of SMC Composite Materials D. F. Adams University of Wyoming 01 January 1982
STP29382S Mechanical Behavior of Three Sheet Molding Compounds D. F. Adams University of Wyoming 01 January 1982
STP25946S Micromechanical Modeling of Yielding and Crack Propagation in Unidirectional Metal Matrix Composites Donald F. Adams University of Wyoming 01 January 1988
JTE10671J Static and Impact Behavior of Graphite/Epoxy Composite Laminates Containing Third-Phase Reinforcement Materials D. F. Adams University of Wyoming 01 March 1977
STP10628S Tabbed Versus Untabbed Fiber-Reinforced Composite Compression Specimens Donald F. Adams Wyoming Test Fixtures, Inc. 01 January 2002
CTR10023J The Wyoming Combined Loading Compression (CLC) Test Method Donald F. Adams University of Wyoming
CTR10984J The Wyoming-Modified Two-Rail Shear Test Fixture for Composite Materials D. Adams University of Wyoming
CTR10109J Unidirectional Composite Compression Strengths Obtained by Testing Cross-Ply Laminates Donald F. Adams University of Wyoming
CTR10670J World of Composites D. F. Adams University of Wyoming
CTR10700J World of Composites Donald F. Adams University of Wyoming