ASTM WK41433

    New Specification for Cured Glass Reinforced Polymer (GRP) Jacketing for Use over Thermal Insulation

    (What is a Work Item?)

    Developed by Subcommittee: C16.40 | Committee C16 | Contact Staff Manager



    WK41433

    1. Scope

    1.1 This specification covers ultravioilet cured glass-reinforced polymer (UV-cured GRP) jacketing for thermal and acoustical insulation operating at either above or below ambient temperatures and in both indoor and outdoor locations. It does not cover insulation jacketing made from other materials such as mastics, aluminum, polyvinyl chloride (PVC), or stainless steel nor does it cover the details of thermal or acoustical insulation systems. 1.2 This specification provides physical requirements for UV-cured GRP jacketing for thermal and acoustical insulation. Guide C1423 provides guidance in selecting jacketing materials and their safe use. 1.3 This is a material specification and does not imply any performance of the installed system using the materials specified herein. 1.4 Units--The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 GRP (glass-reinforced polymers) and FRP (fiber-reinforced polymers) are sometimes used interchangeably 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    This material is commercially available and is being used on many projects around the world. The users are designers, constructors, and facility owners.


    Keywords

    cladding; fittings; GRP; jacket; jacketing; polyester; polymer; resin; thermal insulation; ultraviolet; vinyl ester::

    The title and scope are in draft form and are under development within this ASTM Committee.

    Citing ASTM Standards
    Back to Top
    Work Item Status

    Date Initiated:
    03-22-2013

    Technical Contact:
    James Meier

    Status:
    Draft Under Development