ASTM F3510 - 21 Standard Guide for Characterizing Fiber-Based Constructs for Tissue-Engineered Medical Products


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    There are currently no referencing documents for this standard.


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    C1559 Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type)

    D257 Test Methods for DC Resistance or Conductance of Insulating Materials

    D412 Test Methods for Vulcanized Rubber and Thermoplastic ElastomersTension

    D638 Test Method for Tensile Properties of Plastics

    D648 Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position

    D695 Test Method for Compressive Properties of Rigid Plastics

    D790 Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

    D792 Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

    D854 Test Methods for Specific Gravity of Soil Solids by Water Pycnometer

    D882 Test Method for Tensile Properties of Thin Plastic Sheeting

    D1388 Test Method for Stiffness of Fabrics

    D1621 Test Method for Compressive Properties of Rigid Cellular Plastics

    D1623 Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics

    D1708 Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens

    D1777 Test Method for Thickness of Textile Materials

    D1876 Test Method for Peel Resistance of Adhesives (T-Peel Test)

    D1894 Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting

    D2256/D2256M Test Method for Tensile Properties of Yarns by the Single-Strand Method

    D2990 Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics

    D3039/D3039M Test Method for Tensile Properties of Polymer Matrix Composite Materials

    D3418 Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry

    D3786/D3786M Test Method for Bursting Strength of Textile FabricsDiaphragm Bursting Strength Tester Method

    D3787 Test Method for Bursting Strength of TextilesConstant-Rate-of-Traverse (CRT) Ball Burst Test

    D4404 Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry

    D4496 Test Method for D-C Resistance or Conductance of Moderately Conductive Materials

    D4833/D4833M Test Method for Index Puncture Resistance of Geomembranes and Related Products

    D6420 Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry

    D6539 Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air

    D6701 Test Method for Determining Water Vapor Transmission Rates Through Nonwoven and Plastic Barriers

    D6797 Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test

    D7264 Test Method for Flexural Properties of Polymer Matrix Composite Materials

    E96/E96M Test Methods for Water Vapor Transmission of Materials

    E128 Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use

    E793 Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry

    E1868 Test Methods for Loss-On-Drying by Thermogravimetry

    F316 Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test

    F748 Practice for Selecting Generic Biological Test Methods for Materials and Devices

    F1249 Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor

    F1306 Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates

    F1635 Test Method for in vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants

    F1983 Practice for Assessment of Selected Tissue Effects of Absorbable Biomaterials for Implant Applications

    F2027 Guide for Characterization and Testing of Raw or Starting Materials for Tissue-Engineered Medical Products

    F2150 Guide for Characterization and Testing of Biomaterial Scaffolds Used in Regenerative Medicine and Tissue-Engineered Medical Products

    F2212 Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs)

    F2256 Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading

    F2450 Guide for Assessing Microstructure of Polymeric Scaffolds for Use in Tissue-Engineered Medical Products

    F2475 Guide for Biocompatibility Evaluation of Medical Device Packaging Materials

    F2477 Test Methods for in vitro Pulsatile Durability Testing of Vascular Stents

    F2529 Guide for in vivo Evaluation of Osteoinductive Potential for Materials Containing Demineralized Bone (DBM)

    F2603 Guide for Interpreting Images of Polymeric Tissue Scaffolds

    F2606 Guide for Three-Point Bending of Balloon Expandable Vascular Stents and Stent Systems

    F2664 Guide for Assessing the Attachment of Cells to Biomaterial Surfaces by Physical Methods

    F2739 Guide for Quantifying Cell Viability and Related Attributes within Biomaterial Scaffolds

    F2791 Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions

    F2900 Guide for Characterization of Hydrogels used in Regenerative Medicine

    F2902 Guide for Assessment of Absorbable Polymeric Implants

    F2952 Guide for Determining the Mean Darcy Permeability Coefficient for a Porous Tissue Scaffold

    F2997 Practice for Quantification of Calcium Deposits in Osteogenic Culture of Progenitor Cells Using Fluorescent Image Analysis

    F3036 Guide for Testing Absorbable Stents

    F3089 Guide for Characterization and Standardization of Polymerizable Collagen-Based Products and Associated Collagen-Cell Interactions

    F3106 Guide for in vitro Osteoblast Differentiation Assays

    F3142 Guide for Evaluation of in vitro Release of Biomolecules from Biomaterials Scaffolds for TEMPs

    F3224 Test Method for Evaluating Growth of Engineered Cartilage Tissue using Magnetic Resonance Imaging

    F3259 Guide for Micro-computed Tomography of Tissue Engineered Scaffolds

    F3294 Guide for Performing Quantitative Fluorescence Intensity Measurements in Cell-based Assays with Widefield Epifluorescence Microscopy

    F3369 Guide for Assessing the Skeletal Myoblast Phenotype