ASTM E575 - 05(2018) Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies

    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    A944 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens

    C1354/C1354M Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone

    C1693 Standard Specification for Autoclaved Aerated Concrete (AAC)

    C1892/C1892M Standard Test Methods for Strength of Anchors in Masonry

    D7147 Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers

    E72 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction

    E73 Standard Practice for Static Load Testing of Truss Assemblies

    E196 Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs

    E455 Standard Test Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings

    E488/E488M Standard Test Methods for Strength of Anchors in Concrete Elements

    E518/E518M Standard Test Methods for Flexural Bond Strength of Masonry

    E519/E519M Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages

    E529 Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction

    E564 Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings

    E661 Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads

    E695 Standard Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading

    E754 Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints

    E894 Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings

    E935 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings

    E1190 Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members

    E1512 Standard Test Methods for Testing Bond Performance of Bonded Anchors

    E1803 Standard Test Methods for Determining Strength Capacities of Structural Insulated Panels

    E2126 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings

    E2127 Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction

    E2322 Standard Test Method for Conducting Transverse and Concentrated Load Tests on Panels used in Floor and Roof Construction

    E2954 Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members

    E2969 Standard Test Methods for Transverse Load Tests on Panels Used in Wall Construction

    E3121/E3121M Standard Test Methods for Field Testing of Anchors in Concrete or Masonry

    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    E631 Terminology of Building Constructions