ASTM E3166 - 20e1 Standard Guide for Nondestructive Examination of Metal Additively Manufactured Aerospace Parts After Build


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    There are currently no referencing documents for this standard.


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    E11 Specification for Woven Wire Test Sieve Cloth and Test Sieves

    E94/E94M Guide for Radiographic Examination Using Industrial Radiographic Film

    E114 Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing

    E215 Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube

    E243 Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes

    E317 Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments

    E426 Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys

    E494 Practice for Measuring Ultrasonic Velocity in Materials

    E543 Specification for Agencies Performing Nondestructive Testing

    E571 Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products

    E587 Practice for Ultrasonic Angle-Beam Contact Testing

    E664/E664M Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method

    E747 Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology

    E797/E797M Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method

    E1001 Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves

    E1004 Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method

    E1025 Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiography

    E1030 Practice for Radiographic Examination of Metallic Castings

    E1032 Practice for Radiographic Examination of Weldments Using Industrial X-Ray Film

    E1065 Practice for Evaluating Characteristics of Ultrasonic Search Units

    E1158 Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material

    E1209 Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process

    E1255 Practice for Radioscopy

    E1316 Terminology for Nondestructive Examinations

    E1416 Practice for Radioscopic Examination of Weldments

    E1417 Practice for Liquid Penetrant Testing

    E1441 Guide for Computed Tomography (CT)

    E1475 Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data

    E1570 Practice for Fan Beam Computed Tomographic (CT) Examination

    E1695 Test Method for Measurement of Computed Tomography (CT) System Performance

    E1742 Practice for Radiographic Examination

    E1817 Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)

    E1901 Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods

    E1935 Test Method for Calibrating and Measuring CT Density

    E2001 Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts

    E2007 Guide for Computed Radiography

    E2033 Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method)

    E2104 Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components

    E2338 Practice for Characterization of Coatings Using Conformable Eddy Current Sensors without Coating Reference Standards

    E2339 Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)

    E2373/E2373M Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique

    E2375 Practice for Ultrasonic Testing of Wrought Products

    E2445 Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems

    E2446 Practice for Manufacturing Characterization of Computed Radiography Systems

    E2491 Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems

    E2534 Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts

    E2597 Practice for Manufacturing Characterization of Digital Detector Arrays

    E2698 Practice for Radiographic Examination Using Digital Detector Arrays

    E2736 Guide for Digital Detector Array Radiography

    E2737 Practice for Digital Detector Array Performance Evaluation and Long-Term Stability

    E2767 Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods

    E2862 Practice for Probability of Detection Analysis for Hit/Miss Data

    E2884 Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays

    E2982 Guide for Nondestructive Testing of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications

    E3022 Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing

    E3023 Practice for Probability of Detection Analysis for Versus a Data

    E3081 Practice for Outlier Screening Using Process Compensated Resonance Testing via Swept Sine Input for Metallic and Non-Metallic Parts

    F2971 Practice for Reporting Data for Test Specimens Prepared by Additive Manufacturing

    F3122 Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes

    F3187 Guide for Directed Energy Deposition of Metals