ASTM E1601 - 12 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.
D5673 Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry
D6247 Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry
D7237 Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
D7847 Standard Guide for Interlaboratory Studies for Microbiological Test Methods
D8243 Standard Test Method for Determination of APS Reductase to Estimate Sulfate Reducing Bacterial Bioburdens in Water – Enzyme-Linked Immunosorbent Assay Method
E37 Standard Test Methods for Chemical Analysis of Pig Lead
E53 Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
E314 Standard Test Methods for Determination of Manganese in Iron Ores by Pyrophosphate Potentiometry and Periodate Spectrophotometry Techniques
E350 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
E351 Standard Test Methods for Chemical Analysis of Cast Iron—All Types
E352 Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels
E353 Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
E354 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
E363 Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium
E367 Standard Test Methods for Chemical Analysis of Ferroniobium
E396 Standard Test Methods for Chemical Analysis of Cadmium
E415 Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
E439 Standard Test Methods for Chemical Analysis of Beryllium
E478 Standard Test Methods for Chemical Analysis of Copper Alloys
E536 Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys
E581 Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys
E815 Standard Test Method for Determination of Calcium Fluoride in Fluorspar by EDTA Complexometric Titrimetry
E826 Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry
E841 Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Flame Atomic Absorption Spectrometry
E878 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry
E945 Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by EDTA Complexometric Titrimetry
E1019 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques
E1070 Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry
E1097 Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry
E1277 Standard Test Method for Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by ICP Emission Spectrometry
E1282 Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials
E1326 Standard Guide for Evaluating Non-culture Microbiological Tests
E1335 Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis
E1409 Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion
E1446 Standard Test Method for Chemical Analysis of Refined Gold by Direct Current Plasma Atomic Emission Spectrometry
E1447 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
E1473 Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys
E1568 Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry
E1587 Standard Test Methods for Chemical Analysis of Refined Nickel
E1600 Standard Test Methods for Determination of Gold in Cyanide Solutions
E1621 Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry
E1659 Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet
E1805 Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry
E1835 Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry
E1852 Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace Atomic Absorption Spectrometry
E1898 Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry
E1915 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics
E1917 Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Spectrophotometry
E1938 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry
E1941 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
E1950 Standard Practice for Reporting Results from Methods of Chemical Analysis
E1999 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry
E2050 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion
E2093 Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
E2209 Standard Test Method for Analysis of High Manganese Steel by Spark Atomic Emission Spectrometry
E2242 Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure
E2371 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
E2465 Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
E2575 Standard Test Method for Determination of Oxygen in Copper and Copper Alloys by Inert Gas Fusion
E2594 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method)
E2823 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based)
E2824 Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetry
E2857 Standard Guide for Validating Analytical Methods
E2994 Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)
E3047 Standard Test Method for Analysis of Nickel Alloys by Spark Atomic Emission Spectrometry
F1684 Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications
F2980 Standard Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF)
G211 Standard Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets
Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.
E135 Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
E177 Practice for Use of the Terms Precision and Bias in ASTM Test Methods
E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
E1169 Practice for Conducting Ruggedness Tests
E1763 Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods