ASTM D8111 - 20 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    D4485 Standard Specification for Performance of Active API Service Category Engine Oils


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    D86 Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure

    D130 Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

    D235 Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)

    D240 Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter

    D323 Test Method for Vapor Pressure of Petroleum Products (Reid Method)

    D381 Test Method for Gum Content in Fuels by Jet Evaporation

    D445 Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

    D525 Test Method for Oxidation Stability of Gasoline (Induction Period Method)

    D664 Test Method for Acid Number of Petroleum Products by Potentiometric Titration

    D1319 Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption

    D2699 Test Method for Research Octane Number of Spark-Ignition Engine Fuel

    D2700 Test Method for Motor Octane Number of Spark-Ignition Engine Fuel

    D3231 Test Method for Phosphorus in Gasoline

    D3237 Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy

    D3244 Practice for Utilization of Test Data to Determine Conformance with Specifications

    D3338 Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

    D3343 Test Method for Estimation of Hydrogen Content of Aviation Fuels

    D4052 Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

    D4175 Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants

    D4485 Specification for Performance of Active API Service Category Engine Oils

    D4684 Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

    D4739 Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration

    D4815 Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography

    D5185 Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D5191 Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)

    D5293 Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between 10C and 35C Using Cold-Cranking Simulator

    D5452 Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration

    D5453 Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

    D7320 Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine

    D8047 Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine

    E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

    E168 Practices for General Techniques of Infrared Quantitative Analysis

    E191 Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds