ASTM D7091 - 21 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.
A742/A742M Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
A755/A755M Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
A882/A882M Standard Specification for Filled Epoxy-Coated Seven-Wire Steel Prestressing Strand
A1113/A1113M Standard Specification for Corrugated Steel Structural Plate, Polymer-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
B1000 Standard Practices for Casting Preparation and Test Procedure of Porcelain Enamel-lined Pipe, Fittings, and Valves for Use in the Municipal Wastewater, Sewage, and Water Treatment Industry
C1847 Standard Specification for Direct Buried Pre-Insulated and Jacketed Polyurethane Bonded Low Temperature Hot Water Piping Systems
D522/D522M Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
D823 Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
D968 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
D1014 Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates
D1474/D1474M Standard Test Methods for Indentation Hardness of Organic Coatings
D2197 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
D2454 Standard Practice for Determining the Effect of Overbaking on Organic Coatings
D2803 Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
D3276 Standard Guide for Painting Inspectors (Metal Substrates)
D3451 Standard Guide for Testing Coating Powders and Powder Coatings
D3456 Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
D3794 Standard Guide for Testing Coil Coatings
D4060 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
D4138 Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
D4141/D4141M Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
D4366 Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests
D4619 Standard Practice for Inspection of Linings in Operating Flue Gas Desulfurization Systems
D4752 Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
D5064 Standard Practice for Conducting a Patch Test to Assess Coating Compatibility
D5065 Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces
D5163 Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants
D5178 Standard Test Method for Mar Resistance of Organic Coatings
D5402 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
D5498 Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities
D5702 Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
D6037 Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings
D6279 Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings
D6386 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
D6577 Standard Guide for Testing Industrial Protective Coatings
D6677 Standard Test Method for Evaluating Adhesion by Knife
D6762 Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings
D6905 Standard Practice for Impact Flexibility of Organic Coatings
D6943 Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings
D6944 Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling
D6991 Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
D7187 Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching
D7378 Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness
D7803 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating
D7835/D7835M Standard Test Method for Determining the Solvent Resistance of an Organic Coating Using a Mechanical Rubbing Machine
D7893 Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products
E376 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods
E1795 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E1797 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E2338 Standard Practice for Characterization of Coatings Using Conformable Eddy Current Sensors without Coating Reference Standards
F3078 Standard Test Method for Identification and Quantification of Lead in Paint and Similar Coating Materials using Energy Dispersive X-ray Fluorescence Spectrometry (EDXRF)
F3182 Standard Practice for the Application of Spray-Applied Polymeric Liners Inside Pipelines for Potable Water
G11 Standard Practice for Effects of Outdoor Weathering on Pipeline Coatings
G13/G13M Standard Test Method for Impact Resistance of Pipeline Coatings
G210 Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus
Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.
D609 Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
D823 Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
D1730 Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting