ASTM D6224 - 16 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    D4378 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines

    D6810 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry

    D6971 Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry

    D7590 Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry

    D7720 Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    D92 Test Method for Flash and Fire Points by Cleveland Open Cup Tester

    D95 Test Method for Water in Petroleum Products and Bituminous Materials by Distillation

    D257 Test Methods for DC Resistance or Conductance of Insulating Materials

    D445 Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

    D664 Test Method for Acid Number of Petroleum Products by Potentiometric Titration

    D665 Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water

    D892 Test Method for Foaming Characteristics of Lubricating Oils

    D893 Test Method for Insolubles in Used Lubricating Oils

    D943 Test Method for Oxidation Characteristics of Inhibited Mineral Oils

    D974 Test Method for Acid and Base Number by Color-Indicator Titration

    D1169 Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids

    D1298 Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method

    D1401 Test Method for Water Separability of Petroleum Oils and Synthetic Fluids

    D1500 Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)

    D1533 Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration

    D2272 Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel

    D2273 Test Method for Trace Sediment in Lubricating Oils

    D2422 Classification of Industrial Fluid Lubricants by Viscosity System

    D2668 Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorp

    D2896 Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration

    D2982 Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils

    D3427 Test Method for Air Release Properties of Hydrocarbon Based Oils

    D3524 Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography

    D4052 Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

    D4057 Practice for Manual Sampling of Petroleum and Petroleum Products

    D4378 Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines

    D4739 Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration

    D5185 Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D6304 Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration

    D6810 Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry

    D6971 Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry

    D7155 Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils

    D7414 Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

    D7464 Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing

    D7546 Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor

    D7647 Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction

    D7669 Guide for Practical Lubricant Condition Data Trend Analysis

    D7687 Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel, Fuel/Water Mixtures, and Fuel-Associated Water with Sample Concentration by Filtration

    D7720 Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination

    D7843 Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry

    D7978 Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water--Thixotropic Gel Culture Method

    E1064 Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration

    F311 Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters

    F312 Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters