ASTM D4318 - 17e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    D242/D242M Standard Specification for Mineral Filler for Asphalt Mixtures

    D653 Standard Terminology Relating to Soil, Rock, and Contained Fluids

    D1073 Standard Specification for Fine Aggregate for Asphalt Paving Mixtures

    D1241 Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses

    D1883 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils

    D2166/D2166M Standard Test Method for Unconfined Compressive Strength of Cohesive Soil

    D2216 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass

    D2321 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications

    D2435/D2435M Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading

    D2487 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)

    D2850 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils

    D2940/D2940M Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports

    D3080/D3080M Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions

    D3282 Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes

    D3839 Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe

    D3999/D3999M Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus

    D4186/D4186M Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading

    D4215 Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures

    D4221 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer

    D4223/D4223M Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils

    D4546 Standard Test Methods for One-Dimensional Swell or Collapse of Soils

    D4554 Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities

    D4647/D4647M Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test

    D4767 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils

    D4943 Standard Test Method for Shrinkage Factors of Cohesive Soils by the Water Submersion Method

    D5050 Standard Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts

    D5084 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter

    D5101 Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems

    D5106 Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures

    D5311/D5311M Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil

    D5567 Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems

    D6088 Standard Practice for Installation of Geocomposite Pavement Drains

    D6460 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion

    D6467 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils

    D6528 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Fine Grain Soils

    D6572 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test

    D6913/D6913M Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis

    D7181 Method for Consolidated Drained Triaxial Compression Test for Soils

    D7263 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens

    D7277 Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow

    D7608 Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils

    D7664 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils

    D7830/D7830M Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge

    D7928 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis

    D8151 Standard Practice for Obtaining Rainfall Runoff from Unvegetated Rolled and Hydraulic Erosion Control Products (RECPs and HECPs) for Acute Ecotoxicity Testing

    E1266 Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications

    E2060 Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes

    E3163 Standard Guide for Selection and Application of Analytical Methods and Procedures Used during Sediment Corrective Action

    F1962 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    C702 Practice for Reducing Samples of Aggregate to Testing Size

    D75 Practice for Sampling Aggregates

    D420 Guide for Site Characterization for Engineering Design and Construction Purposes

    D653 Terminology Relating to Soil, Rock, and Contained Fluids

    D1241 Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses

    D2216 Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass

    D2487 Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)

    D3282 Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes

    D3740 Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction

    D4542 Test Methods for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer

    D4753 Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing

    D6026 Practice for Using Significant Digits in Geotechnical Data

    E11 Specification for Woven Wire Test Sieve Cloth and Test Sieves

    E177 Practice for Use of the Terms Precision and Bias in ASTM Test Methods

    E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method