ASTM D1586 / D1586M - 18 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils


    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    C12 Standard Practice for Installing Vitrified Clay Pipe Lines

    C1255 Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy

    D420 Standard Guide for Site Characterization for Engineering Design and Construction Purposes

    D1140 Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing

    D1452/D1452M Standard Practice for Soil Exploration and Sampling by Auger Borings

    D1587/D1587M Standard Practice for Thin-Walled Tube Sampling of Fine-Grained Soils for Geotechnical Purposes

    D2488 Standard Practice for Description and Identification of Soils (Visual-Manual Procedures)

    D3282 Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes

    D3550/D3550M Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils

    D4220/D4220M Standard Practices for Preserving and Transporting Soil Samples

    D4547 Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds

    D4633 Standard Test Method for Energy Measurement for Dynamic Penetrometers

    D4700 Standard Guide for Soil Sampling from the Vadose Zone

    D4719 Standard Test Methods for Prebored Pressuremeter Testing in Soils

    D4823 Standard Guide for Core Sampling Submerged, Unconsolidated Sediments

    D5092/D5092M Standard Practice for Design and Installation of Groundwater Monitoring Wells

    D5220 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method

    D5434 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock

    D5782 Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

    D5783 Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

    D5784/D5784M Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water Quality Monitoring Devices

    D5876/D5876M Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

    D6009 Standard Guide for Sampling Waste Piles

    D6031/D6031M Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes

    D6063 Standard Guide for Sampling of Drums and Similar Containers by Field Personnel

    D6151/D6151M Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling

    D6169/D6169M Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations

    D6232 Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities

    D6282/D6282M Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations

    D6347/D6347M Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods

    D6635 Standard Test Method for Performing the Flat Plate Dilatometer

    D6640 Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations

    D6725/D6725M Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers

    E1943 Standard Guide for Remediation of Ground Water by Natural Attenuation at Petroleum Release Sites

    E2243 Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Re-contouring and Highwall Reclamation

    E2277 Standard Guide for Design and Construction of Coal Ash Structural Fills

    E2278 Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage

    E3163 Standard Guide for Selection and Application of Analytical Methods and Procedures Used during Sediment Corrective Action


    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    D653 Terminology Relating to Soil, Rock, and Contained Fluids

    D854 Test Methods for Specific Gravity of Soil Solids by Water Pycnometer

    D1452/D1452M Practice for Soil Exploration and Sampling by Auger Borings

    D1587/D1587M Practice for Thin-Walled Tube Sampling of Fine-Grained Soils for Geotechnical Purposes

    D2216 Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass

    D2487 Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)

    D2488 Practice for Description and Identification of Soils (Visual-Manual Procedures)

    D2573/D2573M Test Method for Field Vane Shear Test in Saturated Fine-Grained Soils

    D3550/D3550M Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils

    D3740 Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction

    D4220/D4220M Practices for Preserving and Transporting Soil Samples

    D4633 Test Method for Energy Measurement for Dynamic Penetrometers

    D5088 Practice for Decontamination of Field Equipment Used at Waste Sites

    D5092 Practice for Design and Installation of Groundwater Monitoring Wells

    D5299 Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities

    D5434 Guide for Field Logging of Subsurface Explorations of Soil and Rock

    D5778 Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils

    D5782 Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

    D5783 Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

    D5784/D5784M Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water Quality Monitoring Devices

    D5872/D5872M Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices

    D6026 Practice for Using Significant Digits in Geotechnical Data

    D6066 Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential

    D6151/D6151M Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling

    D6169/D6169M Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations

    D6282/D6282M Guide for Direct Push Soil Sampling for Environmental Site Characterizations

    D6286 Guide for Selection of Drilling Methods for Environmental Site Characterization

    D6913/D6913M Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis

    D6914/D6914M Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices