ASTM D1475 - 13 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products

    Citing ASTM Standards Citation data is made available by participants in CrossRefs Cited-by Linking service. A comprehensive list of citations to this standard are listed here.

    C156 Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete

    C461 Standard Test Methods for Mastics and Coatings Used With Thermal Insulation

    C1183/C1183M Standard Test Method for Extrusion Rate of Elastomeric Sealants

    C1241 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure

    D16 Standard Terminology for Paint, Related Coatings, Materials, and Applications

    D115 Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation

    D333 Standard Guide for Clear and Pigmented Lacquers

    D1823 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer

    D2205 Standard Guide for Selection of Tests for Traffic Paints

    D2452 Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds

    D2697 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings

    D2805 Standard Test Method for Hiding Power of Paints by Reflectometry

    D3105 Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials

    D3288/D3288M Standard Test Methods for Magnet-Wire Enamels

    D3730 Standard Guide for Testing High-Performance Interior Architectural Wall Coatings

    D3794 Standard Guide for Testing Coil Coatings

    D3806 Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)

    D3925 Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings

    D3960 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings

    D4060 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser

    D4142 Standard Guide for Testing Epoxy Resins

    D4143 Standard Guide for Testing Latex Vehicles

    D4213 Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss

    D4733 Standard Test Methods for Solventless Electrical Insulating Varnishes

    D4958 Standard Test Method for Comparison of the Brush Drag of Latex Paints

    D5066 Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis

    D5146 Standard Guide to Testing Solvent-Borne Architectural Coatings

    D5150 Standard Test Method for Hiding Power of Architectural Paints Applied by Roller

    D5201 Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings

    D5286 Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints

    D5324 Standard Guide for Testing Water-Borne Architectural Coatings

    D5860 Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens

    D5913 Standard Test Method for Evaluation of Cleanability of Paint Brushes

    D6093 Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer

    D6266 Standard Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)

    D6511/D6511M Standard Test Methods for Solvent Bearing Bituminous Compounds

    D6532 Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens

    D6577 Standard Guide for Testing Industrial Protective Coatings

    D6583 Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption

    D6686 Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings

    D6763 Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents

    D6886 Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography

    D6904 Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry

    D7072 Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings

    D7073 Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films

    D7088 Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry

    D7489 Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions

    D7680 Standard Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester

    D7768 Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography

    D8008 Standard Practice for Representative Field Sampling of Traffic Paints

    D8163 Standard Test Method for Determination of Strength of Colorants and Bases for Architectural, Marine, Maintenance, Commercial, and Industrial Coatings

    E1795 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings

    E1797 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings

    E1868 Standard Test Methods for Loss-On-Drying by Thermogravimetry

    F718 Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet

    F940 Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding

    Referenced ASTM Standards The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    D1193 Specification for Reagent Water

    D1963 Test Method for Specific Gravity of Drying Oils, Varnishes, Resins, and Related Materials at 25/25C

    D4052 Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

    E180 Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial and Specialty Chemicals

    E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method